Removal of Pb(II) from wastewater using wheat bran

The adsorption of Pb(II) ions from aqueous solutions on wheat bran (WB) has been investigated as a function of initial concentration, adsorbent dose, adsorbent particle size, agitation speed, temperature, contact time and pH of solution. The equilibrium process was described well by the Langmuir isotherm model with maximum sorption capacities of 69.0, 80.7 and 87.0 mgg(-1) of Pb(II) on wheat bran at 20, 40 and 60 degrees C, respectively. Thermodynamic parameters, i.e. DeltaG(0), DeltaH(0) and DeltaS(0) have also been calculated for the system and the sorption process was found to be endothermic. Good correlation coefficients were obtained for the pseudo second-order kinetic model. The metal ion could be stripped by addition of 0.5M HCl, making the adsorbent regeneration and its reutilization possible.     

The treatment of textile wastewater including chromium(VI) and reactive dye by sulfate-reducing bacterial enrichment

Sulfate-reducing bacteria (SRB) that could grow on modified Postgate C medium (PC) containing chromium(VI) were isolated from industrial wastewaters and their chromium(VI) reduction capacities were investigated as a function of changes in the initial pH values, chromium, sulfate, NaCl and reactive dye concentrations. The optimum pH value at 50 mg l(-1) initial chromium(VI) concentration was determined to be 8. Chromium(VI) reduction by SRB was investigated at 22.7-98.4 mg l(-1) initial chromium(VI) concentrations. At the end of the experiments, the mixed cultures of SRB were found to reduce within 2-6 days more than 99% of the initial chromium(VI) levels, which ranged from 22.7 to 74.9 mg l(-1). The effects of the initial 0-9.0 g l(-1) concentrations of disodium sulfate and 0-6% (w/v) concentrations of NaCI to chromium reduction showed that the lowest concentrations of sulfate and NaCI were the best for chromium reduction in the PC medium including 50 mg l(-1) chromium(VI). Chromium(VI) reduction in 50 mg l(-1) and 25-100 mg l(-1) Remazol Blue, Reactive Black B or Reactive Red RB containing media were also investigated. In the experiments, 25-30% of the initial dye concentrations and 95% of the chromium(VI) was removed from the medium at the end of 72-h and 24-h incubation periods, respectively.     

Robust reliability and electrical performances by the bulk-contact modulation in 60-V p-channel LDMOS power components

To increase reliability and electrical performance, shallow-trench isolation (STI) (or called field-oxide (FOX)) structures were inserted in the bulk-contact region of 60-V high-voltage p-channel lateral-diffused MOSFET (pLDMOS) devices in this study. As the FOX ratio increased with the addition of FOX segments, the value of the secondary breakdown current (I_t2) was enhanced. Therefore, the anti-electrostatic discharge ability of a pLDMOS device can be efficiently improved using this novel method. In addition, when the weighting ratio of FOX structures increased, variation values in the trigger voltage (V_t1) and holding voltage (V_h) of the corresponding samples remained within the range of approximately 1–4 V. The R_on value decreased because of more uniform conduction. The experimental data for the FOX structures added to the bulk revealed that the I_t2 value was improved by approximately 13.98%, V_h values were greater than 60 V (which is favorable for latch-up immunity), and the R_on value was decreased by approximately 12.62% compared with a reference device under test (without FOX segments in the bulk-contact region).     

Rural Households’ Attitude and Economic Strategies Toward the Conversion of Cropland to Forest and Grassland Program (CCFG): A Case Study in Qira,China

The Conversion of Cropland to Forest and Grassland Program (CCFG), which was initiated by the Chinese government in 1999, is a cropland retirement program with integrated objectives for ecological preservation and local development. The purpose of this article was to study the influencing factors of attitude and economic strategies in rural households toward the CCFG. Rural households’ knowledge, attitude and economic strategies toward the CCFG were investigated through a questionnaire survey in Qira, China. Influencing factors of attitude and strategies of households were analyzed using a logit model technique. The analysis indicated that household’s income level, environmental knowledge of the program, and program implementation were significant influencing factors in a household’s attitude toward the CCFG, while major influencing factors of household strategies were their regional background and availability of income generation sources. Meaningful association was not found between attitude and strategy choices. Rich households had more strategy choices, while poor households were usually confined to low input strategies with uncertain income. To sustain their livelihood, the poor need extra assistances in marketing, loan granting, employment training, information, and technical services.     

Developing an indicator set for measuring sustainable development in India

The global agenda of sustainable development (SD) will get a major boost from the successful implementation of the Sustainable Development Goals (SDGs) in developing countries. This requires effective planning and understanding of the SDGs at the national level and developing sound SDG indicators that account for country priorities. Currently, there is no formal SDG indicator set in India, but the process for it is underway. This paper has attempted to propose a unique technique for identifying the most representative indicator set for SD measurement in India based on the SDGs. Considering the needs and preferences of the country, a three‐stage process is proposed to develop the priority indicator set. The application of the approach has been presented for SDG 7, which relates to energy. This is supported with a background on India's SD progress. The proposed technique is simple yet effective, and can be easily replicated by other developing countries.     

预测区域环境噪声的GIM（1）灰色模型

运用灰色系统理论的原理与方法，建立了区域环境噪声的ＧＩＭ（１）预测模型。结果表明，ＧＩＭ（１）模型在本文例示的空间序列分析中，精度高于ＧＩＭ（１，１）模型的具有实际应用价值。     

Thermogravimetric pyrolysis of waste polyethylene-terephthalate and polystyrene: A critical assessment of kinetics modelling

Pyrolysis is considered as possible technique to thermally convert waste plastics into chemicals and energy. Literature on experimental findings is extensive, although experiments are mostly performed in a dynamic heating mode, using thermogravimetric analysis (TGA) and at low values of the heating rate (mostly below 30 K/min). The present research differs from literature through the application of far higher heating rates, up to 120 K/min. The use of these dynamic results to define the reaction kinetics necessitates the selection of an appropriate reaction mechanism, and 21 models have been proposed in literature considering the rate limiting step being diffusion, nucleation or the reaction itself.The current research studied the cracking of PET and PS by TGA at different heating rates (temperature ramps). Results were used to check the validity of the proposed mechanisms. Several conclusions are drawn: (i) to obtain fair results, the heating ramp should exceed a minimum value, calculated at 30 K/min for PET and 80 K/min for PS; (ii) application of the majority of the models to experimental findings demonstrated that they do not meet fundamental kinetic considerations and are questionable in their use; and (iii) simple models, with reaction order 1 or 2, provide similar results of the reaction activation energy.A further comparison with literature data for dynamic and isothermal experiments confirms the validity of these selected models. Since TGA results are obtained on a limited amount of sample, with results being a strong function of the applied heating rate, the authors believe that isothermal experiments, preferably on a large scale both towards equipment and/or sample size, are to be preferred.     

The potential of cost-effective coconut husk for the removal of toxic metal ions for environmental protection

Coconut (Cocos nucifera) husk, an agricultural waste, has been thoroughly investigated for the removal of toxic Cd(II), Cr(III) and Hg(II) ions from aqueous media. The parameters like nature and composition of electrolyte, concentration of toxic ions, dosage of coconut husk, and equilibration time between the two phases were optimized for their maximum accumulation onto the solid surface. The effect of common ions on the uptake of metal ions has been monitored under optimal conditions. The variation of retention of each metal ion with temperature was used to compute the thermodynamic quantities DeltaH, DeltaS and DeltaG. The values 18.1+/-0.6 kJmol(-1), 74+/-2 Jmol(-1)K(-1), and -3.8+/-0.04 kJmol(-1) at 298 K; 10.8+/-0.8 kJmol(-1), 48.8+/-2.7 Jmol(-1)K(-1), and -4.6+/-0.3 kJmol(-1) at 298 K; and -37.4+/-2k Jmol(-1), 105+/-7 Jmol(-1)K(-1) and -2.58+/-0.5 kJmol(-1) at 298 K were obtained for Cd(II), Cr(III) and Hg(II) ions, respectively. The sorption data were analysed by applying different sorption isotherms. The sorption capacity and energy were evaluated for each metal ion. The values of the Freundlich constants 1/n and C(m) were 0.92+/-0.04 and 52.6+/-22.2 mmolg(-1); 0.85+/-0.05 and 56.0+/-0.03 mmolg(-1); and 0.88+/-0.03 and 6.84+/-0.45 mmolg(-1) for Cd(II) Cr(III) and Hg(II) ions, respectively. Similarly, the Dubinin-Radushkevich (D-R) constants beta, X(m,) and E were evaluated for the three metal ions. To check the selectivity of the sorbent, sorption of a number of elements was measured under similar conditions. Separation of Zn(II) from Cd(II); Cr(III) from I(I), Zr(IV), Se(IV), and Hg(II) from Se(IV) and Zn(II) can be achieved using this sorbent. This cheap material has potential applications in analytical chemistry, water decontamination, industrial effluent treatment and in pollution abatement.     

改进密切值法优化ISO14000环境影响结果排序

ISO14000遵循的是一种持续改进的原则，企业实施ISO14000环境管理体系是一个不断提高的过程。因此，企业需要分析生产经营过程中的环境影响并对造成环境影响最大的生产环节进行重点改进。本文将密切值法运用于环境管理体系中，以帮助企业确定环境影响的大小，给出持续改进的优先顺序，并在原有密切值法的基础上提出最优密切值与最劣密切值，使评价结果更合理。     

Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone

Nickel(II) reacts with N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone (ECCT) and forms a yellow colored complex, which was extracted into n-butanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-ECCT complex was measured at different intervals of time at 400nm, to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72h. The system obeyed Beer's law in the concentration range of 1.2-5.6mugml(-1) of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.114x10(4)Lmol(-1)cm(-1) and 5.29x10(-3)mugcm(-2) at 400nm, respectively. Hence, a detailed study of the extraction of nickel(II) with ECCT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.