共查询到17条相似文献,搜索用时 535 毫秒
1.
汽车用材料——PA66及其玻璃纤维复合材料在不同介质中的老化行为研究 总被引:1,自引:0,他引:1
在三种介质(二次水,汽油,乙二醇,50℃温度)条件下对PA66及PA66/GF进行95天左右的人工模拟材料在汽车使用环境下的加速试验,对不同老化时间的PA66及PA66/GF试样进行了宏观力学测试及吸湿性测试,并进一步利用示差扫描量热法(DSC),红外光谱及扫描电镜等手段分析老化前后试样的微观结构及组织差异。结合老化前后试样的力学性能变化,揭示了PA66及复合材料的老化规律和机理。实验表明,PA66及PA66/GF在三种介质中拉伸强度呈现下降趋势。其主要机理是介质溶液对试样渗入的结果影响,降低了分子间的相互作用力(范德华力)从而使材料机械性能下降;同时未发现化学作用对材料的力学性能有明显的变化。 相似文献
2.
3.
近年来,液体硅橡胶(Liquid Silicone Rubber,LSR)已经在外绝缘领域得到了较为广泛的应用,但是目前对其耐老化性能的研究还不够深入。尤其是在中国南方地区使用时,高温、高湿环境更容易导致液体硅橡胶的老化。在许多地区都观察到了电流、电压互感器的液体硅橡胶绝缘外套的龟裂、老化现象,对设备的安全运行产生了影响。本文设计并实施了在光照、高温、高湿、电晕等老化因素作用下的液体硅橡胶人工老化试验,并对老化试验后的样品进行了硬度、力学性能、憎水性、光泽度以及SEM、FTIR等微观性能试验和分析。认为在光照作用下,高温、高湿环境对液体硅橡胶具有加速老化作用,表现为硬度上升、憎水性下降、光泽度下降,并且在表面出现细微裂纹。 相似文献
4.
为了研究钛合金螺接复合材料件的热带海洋环境腐蚀/老化效应,设计并制备钛合金螺栓连接复合材料模拟件,依托永兴岛大气试验站,开展钛合金螺栓连接复合材料模拟件海洋大气户外暴露试验,收集了2年的环境腐蚀/老化数据,主要包括宏微观形貌、成分变化及力学性能等。研究结果表明:①钛合金螺栓连接复合材料模拟件在户外暴露6个月后,螺栓和螺母表面涂层均发生明显腐蚀;暴露2年后,螺栓表面离子镀铝层脱落导致其严重变色,螺母表面MoS2涂层发生明显腐蚀,复合材料层合板表面出现明显老化,局部出现纤维剥落;②在力学性能方面,经自然环境暴露2年后,连接件承载能力无明显变化,断裂方式均为螺栓钉头弯曲破坏,连接件韧性出现明显下降,断裂时最大位移较初始状态相比下降约16%。 相似文献
5.
6.
高分子材料在使用过程中,由于受各种环境因素作用,会逐步出现性能下降,甚至丧失使用价值的老化现象,不仅造成资源浪费,更形成安全隐患。为应对老化问题,研究者以各种宏观性能或微观结构、组份的变化来表征老化过程,针对高分子材料的环境适应性开展了大量研究工作,并在此基础上提出了不同的老化机理和服役寿命预测方法。从高分子材料老化过程表征的视角,综述了近年来高分子材料服役寿命预测方法的最新进展。 相似文献
7.
本文针对近年来出现在一些变电站SF6电压、电流互感器的液体硅橡胶绝缘护套出现龟裂老化这一现象,对发生老化的硅橡胶材料进行了性能测试和试验,并利用红外光谱分析、XPS分析、热失重等手段分析了其微观结构和物质组成的变化。研究发现老化后的液体硅橡胶中Si-C、Si-O官能团和Si、C、O元素的相对含量发生了变化,且随着老化程度的增加呈现出较为明显的规律,老化越严重,Si-C键含量越少,C元素的含量越少,O元素含量越多。本文认为,用官能团含量、元素相对含量可以准确地表征液体硅橡胶材料的老化程度。通过对不同老化程度的液体硅橡胶进行的憎水性、耐漏电起痕性能的试验也证实了本文的观点。 相似文献
8.
为了实现对不同温度下高压交联聚乙烯电缆绝缘老化程度检测,提出基于量化回归分析的高压交联聚乙烯电缆绝缘老化程度检测方法。构建不同温度下高压交联聚乙烯电缆绝缘老化程度的统计数据分析模型,采用谱特征分析方法进行不同温度下高压交联聚乙烯电缆绝缘老化程度的谱分析,提取反映不同温度下高压交联聚乙烯电缆绝缘老化程度的谱信息特征量,采用关联特征分析和定量递归图分析方法,进行不同温度下高压交联聚乙烯电缆绝缘老化程度的自适应检测,构建电缆绝缘老化程度的模糊相关性统计分析模型,结合模糊参数自适应寻优控制方法,实现电缆绝缘老化程度的检测优化设计。仿真结果表明,采用该方法进行电缆绝缘老化程度检测的准确性较高,检测结果可靠性较好。 相似文献
9.
10.
11.
Plastic products used for packaging are often discarded after a single use resulting in an inexhaustible supply of waste polymeric materials. The stiffness and strength of polymeric materials have been known to improve with the addition of lignocellulosic fibres available in abundance in nature. Hence, composite materials containing natural fibres and waste plastics would result in the reduction of solid wastes and the use of cheap, renewable resources. Composite specimens, consisting of waste plastics obtained from a Kerbside collection (high density polyethylene (HDPE) waste, Janitorial waste, Kerbside waste I and Kerbside waste II) and Pinus radiata woodfibres (medium density fibres (MDF)), have been produced through melt blending and injection moulding. The effects of fibre content, matrix type and interfacial bonding on the tensile and flexural properties of these composite materials have been determined through extensive testing at various conditions. The mechanical properties of these composites at room temperature and humidity depend on the amount of woodfibres, the mechanical properties of the waste plastics used and the presence of a suitable coupling agent. The tensile strengths of MDF/waste plastic composites do not generally change with fibre content except for 40% MDF/HDPE waste and 40% MDF/Kerbside waste II (plus 1% Epolene™) composites, where the tensile strengths increase by about 25% compared to those of the corresponding waste plastics. Flexural strengths of MDF/waste plastic composites increase with the addition of medium density fibres with the exception of MDF/Kerbside waste I composites. The tensile and flexural moduli of MDF/waste plastic composites mostly increase with increasing fibre content. 相似文献
12.
反硝化脱氮固体碳源材料研究进展 总被引:2,自引:0,他引:2
在污水处理中,固体碳源是制约生物反硝化脱氮的重要因素。天然固体碳源有着丰富的来源,但是机械强度低;人工合成固体碳源有很好的物理性质,但是造价较高;天然高分子材料经过改造后具有价格低、物性好的优点,因而成为研究的热点,且具有很好的市场前景。 相似文献
13.
本文介绍了汽车内饰材料常见的老化试验方法:人工加速老化试验、IP/DP箱暴晒和整车暴晒,分别讨论三种试验方法涉及的规范以及操作性.人工加速老化试验能快速掌握汽车内饰材料老化性能,缩短材料研发周期;IP/DP箱和整车对内饰件或其装配件进行的老化试验降低内饰材料加工工艺存在的风险,确保了内饰材料质量.整车暴晒收集的数据为人... 相似文献
14.
Lake eutrophication is an economic, recreational, and aesthetic problem that affects every lake of the world. Eutrophication is the natural process of lake aging, and progresses irrespective of man's activities. Pollution, however, can hasten the natural rate of aging and shorten the life expectancy of a body of water. The eutrophication of a lake consists of the gradual progression from one life stage to another based on the degree of nourishment or productivity. The extinction of a lake is attributed to enrichment by nutritive materials, biological productivity, decay, and sedimentation. Presently used methods for retarding eutrophication are the abatement of cultural enrichment, treatment of eutrophic symptoms, and control of fundamental causes. 相似文献
15.
Although moisture has a decisive role in the permanence of cellulose and unprinted paper, its role in ink release from the surface of printed recovered papers remains unclear. This work aimed to determine whether various relative humidity levels in the artificial aging test affect ink release from the surface of the paper and its fibers when pulping cold-set offset printed newspapers in alkaline pulping conditions. The results showed that relative humidity variations from 30% to 70% negligibly affected ink release at 60 °C. However, compared with these lower humidity levels, exposure to 90% relative humidity for at least 25 h resulted in a higher ink content bound to fibers, a greater formation of visible dirt specks after pulping and a smaller formation of microscopic ink particles. In practical applications, the accurate estimation of climate effects during the storage and the transportation of recycled papers requires that humidity conditions are taken into account while performing artificial aging tests with paper products. 相似文献
16.
17.
典型大气环境玻璃钢天线罩聚氨酯涂层工艺老化行为研究 总被引:1,自引:0,他引:1
通过南海海洋大气环境、海南万宁湿热乡村大气环境、西藏拉萨高原大气环境户外大气暴露对玻璃钢基灭线罩聚氨酯涂层工艺进行了老化试验,运用光泽、颜色、粉化率、SEM等手段测试了涂层在户外大气暴露的性能变化和表面形貌,并进行对比分析。结果表明,在相同大气环境中,工艺玻璃钢板/雷达罩底漆/浅灰航天聚氨酯涂层耐候性能优于工艺玻璃钢板/环氧聚酰胺/弹性聚氨酯磁漆涂层的耐侯性能;对于同种工艺,西沙海洋大气环境对其耐侯性的影响最大,其次是万宁湿热乡村环境,拉萨高原环境影响较小;光照、温度、湿度是涂层老化的主要原因。 相似文献