Social and environmental injustices in solid waste management in sub-Saharan Africa: a study of Kinshasa,the Democratic Republic of Congo

This paper investigates social and environmental injustices in solid waste management in Kinshasa, the capital of the Democratic Republic of Congo. The urban poor in most parts of Kinshasa bear a huge encumbrance of the solid waste burden and face multiple challenges associated with poor management of solid waste. This situation has resulted in poor and unhealthy living conditions for the majority of the urban residents. The problem of solid waste management in Kinshasa has further been compounded by rapid urbanisation which has occurred in the face of poor urban governance, civil conflict and weak institutional set-up. The combination of these challenges has resulted in increased overcrowding, poor sanitary conditions, lack of water and an unprecedented accumulation of solid waste which have triggered a myriad of urban problems. The worst affected are the poor urban who reside in locations that receive little or no socio-economic services from the Kinshasa Municipal authority. Using secondary data collected through a desk study, this paper argues that the poor solid waste situation in Kinshasa is not only a health risk, but also presents issues of both social and environmental injustices. These issues are analysed within the context of evolving arguments that focus on the need to develop a pro-poor approach in solid waste management that may present an opportunity for achieving both social and environmental justice for the urban poor in Kinshasa.     

Current Levels and Management of Solid Wastes in Nigeria

Solid waste is of serious concern in developing countries because of its high rate of generation and the low‐end quality of its management. Inefficient handling of solid wastes may result in deterioration of environmental quality, but it can also result in loss of potential resources. This study reviews current solid waste generation and management in Nigeria and the need for an effective collection, recovery, and recycling policy. Our review is based on literature searches and personal field surveys. Observations showed that uncontrolled electronic waste (e‐waste), agricultural‐waste (agro‐waste), scrap metals, waste polymers, and waste from the transportation sector are prevalent in Nigeria. Recent collection rates were less than 50% of the total solid waste generated (i.e., approximately 40% was collected). With an effective collection system and appropriate policies, the abundance of solid waste in the country could present material recovery and recycling opportunities that would boost the economy and move Nigeria closer to sustainable resource management.     

Traditional Coping Mechanism and Environmental Sustainability Strategies in Nnewi, Nigeria

Nnewi is situated some 30 kilometres South East of Onitsha in Anambra State in the southeastern part of Nigeria. This highly commercial town has undergone rapid urbanisation and industrialisation within the past two decades, since the end of the 1967–1970 Nigerian civil war. The Igbo community of the study area had traditionally employed bioconversion methods and other indigenous technology to process or recycle bio and non-degradable wastes. Industrialisation has enjoyed priority status in this locality as a requirement for modernisation and economic progress. The rapid urbanisation, aggressive industrialisation, and the attendant uncontrolled population growth have had a deleterious impact on the environment. There is now a wide range of industrial wastes that are released daily into the environment. Effects of these activities on the socio-cultural practices of the people, plant genetic resources and the environment are highlighted. In addition to palliative measures suggested here, a call is made to revisit the successful indigenous waste treatment and management technology formerly practised by the Igbo community. The importance of combining modern biotechnological approaches with the indigenous technology, norms and practices of Nwewi people to effect suitable waste treatment and management, as well as improving the living habits and the education of the people about their environment, is recommended. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solid Waste Management in Nigeria: Problems and Issues

/ This paper is a presentation of the problems of solid waste management in Nigeria and certain important issues that must be addressed in order to achieve success. At the core of the problems of solid waste management are the absence of adequate policies, enabling legislation, and an environmentally stimulated and enlightened public. Government policies on the environment are piecemeal where they exist and are poorly implemented. Public enlightenment programs lacked the needed coverage, intensity, and continuity to correct the apathetic public attitude towards the environment. Up to now the activities of the state environmental agencies have been hampered by poor funding, inadequate facilities and human resources, inappropriate technology, and an inequitable taxation system. Successful solid waste management in Nigeria will require a holistic program that will integrate all the technical, economic, social, cultural, and psychological factors that are often ignored in solid waste programs.KEY WORDS: Solid waste; Management; Problems; Solutions; Nigeria     

Inclusive municipal solid waste management policy in Nigeria: engaging the informal economy in post-2015 development agenda

The problem of municipal solid waste has remained intractable in Nigeria despite the state’s central role in municipal solid waste management (MSWM). Policy and reforms of the MSWM system have invariably excluded the informal economy, with this exclusion frequently reinforced by uncritical implementation of neo-liberal development policies. Yet, the informal economy fortuitously remains active in solid waste collection, recycling, and disposal. This article is the aggregate outcome of an 8-year multi-stakeholder engagement in MSWM in Nigerian cities. It draws on insights from first-hand qualitative engagement with informal waste workers, interviews with key stakeholders, policy documents, and relevant literature to situate the Nigerian informal waste economy within current international development discourse. While highlighting the implications of social acceptance and inclusion of the waste economy in post-2015 MSWM and development policy, the study notes the lack of an articulate policy on MSWM in Nigeria and canvasses a specific policy to integrate the ubiquitous informal waste economy in MSWM. The paper suggests that inclusion per sé is central to the sustainable development goals (SDGs), and argues that an inclusive MSWM policy in Nigeria is desirable as it maps onto the SDGs which aim to improve lives in the post-2015 development era.     

Public Meetings About Local Waste Management Problems: Comparing Participants to Nonparticipants

One of the more traditional ways to involve citizens in environmental management in the United States is to hold a public meeting. Yet public meetings are also frequently criticized for stereotypical weaknesses, including a concern that citizens who attend public meetings do not accurately represent citizens who do not attend. To examine this concern in the context of local waste management problems, this study investigates whether citizens who attend public meetings differ from citizens who do not attend meetings. In the spring of 1998, residents in two New York communities facing local waste management problems received mailed questionnaires. Those surveyed included citizens who had previously attended state-sponsored public meetings about the waste sites and citizens who lived within one mile of the respective waste sites but had not attended any meetings. A comparison of demographic characteristics showed that, in both communities, citizens who attended meetings tended to report higher incomes and have children living at home. In one community, previous meeting participants tended to perceive greater risks from the waste site. In both communities, participants were less likely to consider certain sources of information about the waste sites, including the state environmental agency, state health agency, and the industries, as credible. Regardless of whether they had previously attended public meetings, respondents who perceived the risks as greater also perceived the sources as less credible. The conclusions suggest some potential challenges to effective communication at public meetings, including overcoming widespread skepticism and heightened concern among audience members.     

Sound management of brominated flame retarded (BFR) plastics from electronic wastes: State of the art and options in Nigeria

Management of flame retarded plastics from waste electrical and electronic equipment (WEEE) has been posing a major challenge to waste management experts because of the potential environmental contamination issues especially the formation of polybrominated-dioxins and -furans (PBDD/F) during processing. In Nigeria, large quantities of electronic waste (e-waste) are currently being managed—a significant quantity of which is imported illegally as secondhand electronics. As much as 75% of these illegal imports are never reused but are rather discarded. These waste electronic devices are mostly older equipment that contains brominated flame retardants (BFRs) such as penta-brominated diphenyl ethers (PBDEs), and polybrominated biphenyls (PBBs) which are presently banned in Europe under the EU WEEE and RoHS Directives. Risk assessment studies found both to be persistent, bio-accumulative and toxic. The present management practices for waste plastics from WEEE in Nigeria, such as open burning and disposal at open dumps, creates potential for serious environmental pollution. This paper reviews the options in the environmentally sound management of waste plastics from electronic wastes. Options available include mechanical recycling, reprocessing into chemicals (chemical feedstock recycling) and energy recovery. The Creasolv^® and Centrevap^® processes, which are the outcome of the extensive research at achieving sound management of waste plastics from WEEE in Europe, are also reviewed. These are solvent-based methods of removing BFRs and they presently offer the best commercial and environmental option in the sound management of waste BFR-containing plastics. Because these developments have not been commercialized, WEEE and WEEE plastics are still being exported to developing countries. The industrial application of these processes and the development of eco-friendlier alternative flame retardants will help assure sound management of WEEE plastics.     

A discussion to promote global sustainability techniques for motivating plastic waste to minimize carbon footprints

This paper emphasizes the significant challenges facing the sustainable environment, including managing and handling plastic waste and reducing carbon footprints. To tackle these challenges, it is essential to identify people's awareness levels of waste handling techniques and their pro-environmental behaviors. The study focuses on Guwahati, one of the most important cities in Northeast India, which generates increasing plastic waste daily. The paper aims to identify the factors contributing to the reduction of carbon footprints resulting from plastic waste management activities. The data collected from 1326 respondents was analyzed using factor analysis, and the reliability of the dataset was confirmed using Cronbach's alpha (0.84 for the awareness level of waste management techniques and 0.780 for the prevalent mode of plastic waste management techniques). KMO (0.796), Bartlett's test of sphericity (p < 0.001), and determinant score (0.019) were used to assess the data adequacy and factorability of the dataset, and the results were found to be satisfactory. Principal component analysis, exploratory factor analysis, and varimax orthogonal rotation method were used to identify high-loaded factors by reducing the number of variables. The results showed that two highly loaded components, namely awareness level of waste management techniques (AWMT) and prevalent mode of plastic waste management techniques (PWMT), explained 27.53% and 24.34% of the total variance, respectively, with eigenvalues of 3.35 and 2.88. The regression model confirmed the statistical significance of these factors (p < 0.001) and their relationship with the dependent variable, greenhouse reduction (GHGR). The study proposes that minimizing carbon footprints in the environment can be achieved by focusing on a limited number of controllable factors such as AWMT and PWMT. This study provides valuable insights to the authorities in controlling waste generation and achieving a pollution-free environment.     

Making cities resilient to climate change: identifying “win–win” interventions

Urbanisation is truly a global phenomenon. Starting at 39% in 1980, the urbanisation level rose to 52% in 2011. Ongoing rapid urbanisation has led to increase in urban greenhouse gas (GHG) emissions. Urban climate change risks have also increased with increase in climate-induced extreme weather events and more low-income urban dwellers living in climate sensitive locations. Despite increased emissions, including GHGs and heightened climate change vulnerability, climate mitigation and adaptation actions are rare in the cities of developing countries. Cities are overwhelmed with worsening congestion, air pollution, crime, waste management, and unemployment problems. Lack of resources and capacity constraints are other factors that discourage cities from embarking on climate change mitigation and adaptation pathways. Given the multitude of problems faced, there is simply no appetite for stand-alone urban climate change mitigation and adaptation policies and programmes. Urban mitigation and adaptation goals will have to be achieved as co-benefits of interventions targeted at solving pressing urban problems and challenges. The paper identifies administratively simple urban interventions that can help cities solve some of their pressing service delivery and urban environmental problems, while simultaneously mitigating rising urban GHG emissions and vulnerability to climate change.     

Sustainable development principles for the disposal of mining and mineral processing wastes

This paper examines the minerals industry's response to sustainable development in the area of waste disposal and argues that leadership and guidance are still needed to forge collective agreement on norms and standards of practise. To encourage further debate, the paper develops a set of sustainable development principles for the disposal of mining and mineral processing wastes, and discusses the implications for current and future practise. In practise, the principles can guide waste disposal decisions through the consideration of what risk and magnitude, in any given local context, a particular management solution poses to their application. The sustainability challenge in the management of tailings and waste rock is to dispose of material, such that it is inert or, if not, stable and contained, to minimise water and energy inputs and the surface footprint of wastes and to move toward finding alternate uses. Future trends in mining and processing may compound the challenges of waste management, as lower ore grades increase the ratio of waste produced for a given unit of resource, and emphasise the urgency and need for the industry to adopt new approaches. New technologies and innovations, such as thickened tailings, dry stacking and paste backfill, have greatly increased the waste disposal methods available to meet the future challenges to sustainable development.     

Quality of Water from Hand Dug Wells in Onitsha Metropolitan Areas of Nigeria

Summary Wide Range of human and anthropogenic activities impinges on the urban environment in most cities in Nigeria, to degrade the quality of water resources. Some of these activities (daily discharge of solid and liquid waste, industrial effluent, and physo-chemical weathering processes) are discharged directly on sources of water supply to the populace of Onitsha. Based on this problem, this paper examines the quality of water from hand-dug wells in Onitsha. 15 wells water samples were collected during the month of January, July, and August with the aid of sterilized containers. And sent to the laboratory for analyses, results showed that wells that are located close to dumpsites are more polluted in terms of turbidity, TSS, CaCo₂ conductivity salinity acidity, Pb, Fe and bacteriological quality of the well water. Also most of the hand-dug well water qualities are unsafe for human consumption, because they are generally above the WHO maximum acceptable threshold. Since this source of water form one of the major source of water to the inhabitants, there is need for purification proper disposal of waste, public education of the health implication of waste/impure water and other management measures.     

A critical review on plastic waste administration

The management of plastic waste through various methods such as landfilling, recycling, and incineration has several inherent shortcomings, such as a lack of resources, preparation, motivation, financial power, and expertise. Additionally, these methods are unable to handle the quantity and types of plastic waste, nor do they increase the public's interest in plastic waste management practices. According to research, environmental, economic, and social factors are the main drivers for reducing plastic waste. Experts from around the world have identified four significant areas of concern for which solutions have been proposed: methods of plastic waste reduction and management, the amount of plastic waste, the quality of waste/plastic, and awareness of plastic waste management/cost of plastic waste management. However, individual solutions proposed for these key areas of concern are facing several challenges, leading to delays in their adoption or less popularity globally. The review has identified the reasons for the less popularity of existing plastic waste management methods, which are less environmentally friendly and have a complex process, hence requiring serious reconsideration from technocrats and researchers to develop more sustainable and efficient procedures that do not produce more hazardous by-products. This study also found that financial incentives are one of the main drivers to ensure the mass participation of lower and working-class people.     

Municipal solid waste management in China: Status,problems and challenges

This paper presents an examination of MSW generation and composition in China, providing an overview of the current state of MSW management, an analysis of existing problems in MSW collection, separation, recycling and disposal, and some suggestions for improving MSW systems in the future. In China, along with urbanization, population growth and industrialization, the quantity of municipal solid waste (MSW) generation has been increasing rapidly. The total MSW amount increased from 31.3 million tonnes in 1980 to 212 million tonnes in 2006, and the waste generation rate increased from 0.50 kg/capita/day in 1980 to 0.98 kg/capita/year in 2006. Currently, waste composition in China is dominated by a high organic and moisture content, since the concentration of kitchen waste in urban solid waste makes up the highest proportion (at approximately 60%) of the waste stream. The total amount of MSW collected and transported was 148 million tonnes in 2006, of which 91.4% was landfilled, 6.4% was incinerated and 2.2% was composted. The overall MSW treatment rate in China was approximately 62% in 2007. In 2007, there were 460 facilities, including 366 landfill sites, 17 composing plants, and 66 incineration plants. This paper also considers the challenges faced and opportunities for MSW management in China, and a number of recommendations are made aimed at improving the MSW management system.     

Progress with implementing local air-quality management in rural areas of England

Air quality in the UK, although vastly improved from the smogs of the 1950s, now faces a new set of challenges from a variety of sources and pollutants. Poor air quality has long been associated with urban areas, but it is becoming clear that many rural locations also have locations likely to exceed the UK Air Quality Strategy-objectives: This paper will examine the extent to which rural authorities have been engaged in the local air-quality management (LAQM) process, a new regime by which air quality control is being accomplished in the UK. Results are presented from a questionnaire survey of environmental health officers of 100 rural authorities undertaken in January 1999. The paper investigates both the technical aspects of the LAQM process as well as the management approaches. The current progress of rural authorities, and some of the problems they face, are discussed particularly in comparison with urban areas. It is concluded that some rural authorities with air pollution problems stemming either from within or outwith their borough, may face significant challenges from the LAQM review and assessment process, particularly where air pollution responsibilities have only relatively recently been addressed. Rural authorities seem to be embracing these new responsibilities enthusiastically, but it is almost inevitable that they will be trailing behind urban authorities who have several decades of experience and joint working to draw upon.     

Medical waste management in Korea

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulatory agencies and waste generators to better manage the waste from healthcare facilities. This paper presents an overview of the current management practices of medical waste in Korea. Information regarding generation, composition, segregation, transportation, and disposal of medical wastes is provided and discussed. Medical waste incineration is identified as the most preferred disposal method and will be the only available treatment option in late 2005. Faced with increased regulations over toxic air emissions (e.g. dioxins and furans), all existing small incineration facilities that do not have air pollution control devices will cease operation in the next few years. Large-scale medical waste incinerators would be responsible for the treatment of medical waste generated by most healthcare facilities in Korea. It is important to point out that there is a great potential to emit air toxic pollutants from such incinerators if improperly operated and managed, because medical waste typically contains a variety of plastic materials such as polyvinyl chloride (PVC). Waste minimization and recycling, control of toxic air emissions at medical waste incinerators, and alternative treatment methods to incineration are regarded to be the major challenges in the future.     

Environmental accounting for waste management: A study of local governments in Australia

Local governments in Australia, especially in large urban areas, have faced a challenge of the growing quantity of waste generated and the diminishing space for waste disposal in recent years. The central government has demonstrated the importance of developing strategies to make full environmental costs and impacts of waste disposal and material recovery accountable for waste management decision-making. However, research into this field is limited. This paper investigates environmental accounting practices in local government waste management. From a survey conducted with local government authorities in New South Wales (NSW) Australia, it is found that overall the level of direct waste flow and activity accounting is higher than the level of hidden and external environmental cost accounting, though local governments tend to identify and use more physical information associated with waste flows and activities than relevant monetary information. External environmental impacts of waste disposal are often overlooked and show the lowest level of practices. The survey results also indicate that urban local governments have taken more environmental information into account than rural local governments, but such difference is not significant between local governments of different sizes. The complexity of waste technical services and operations is confirmed to have a positive and significant effect on the level of environmental accounting for waste management across local governments surveyed.     

Management and recycling of waste glass in concrete products: Current situations in Hong Kong

Disposal of more than 300 tonnes waste glass daily derived from post-consumer beverage bottles is one of the major environmental challenges for Hong Kong, and this challenge continues to escalate as limited recycling channels can be identified and the capacity of valuable landfill space is going to be saturated at an alarming rate. For this reason, in the past ten years, a major research effort has been carried out at The Hong Kong Polytechnic University to find practical ways to recycle waste glass for the production of different concrete products such as concrete blocks, self-compacting concrete and architectural mortar. Some of these specialty glass-concrete products have been successfully commercialized and are gaining wider acceptance. This paper gives an overview of the current management and recycling situation of waste glass and the experience of using recycled waste glass in concrete products in Hong Kong.     

How multilateral financial institutions promote sustainable water infrastructure planning through economic appraisal: case studies from coastal cities of China

Sustainable urban water infrastructure planning is vital for all cities in developing countries, where rapid urbanization has exacerbated the increasingly burdened environment. Water sustainability is a prerequisite for economic growth, social equity, and living quality in urban areas. This paper documents the current challenges and summarizes the solutions adopted in water infrastructure planning and management. Then, case studies of how multilateral financial institutions have promoted sustainable water infrastructure planning through economic appraisal and the novel approaches adopted for sustainable water infrastructure planning and asset management, are presented for the three cities of Jiaozhou, Cixi, and Fangchenggang. Conclusions are made based on the comparison and analysis of the experiences drawn from the case studies of how economic analysis could help promote sustainable water infrastructure planning and management. It is illustrated that economic analysis that considers ecosystem services supply should be employed more in water infrastructure planning, operation, and management in China.     

Water localisation and reclamation: steps towards low impact urban design and development

Numerous drivers are providing stimulus for increased water cycle localisation within urban neighbourhoods. This paper uses predominantly Australasian case studies to highlight trends, successes and challenges in the transition to neighbourhood centred water-based services using 'Low Impact' and 'Water Sensitive' design and development techniques. Major steps towards urban sustainability are demonstrated, for example, up to 70% reduction in the demand for potable water (Aurora, Melbourne), removal of contaminated stormwater and sewage effluent discharge to natural waterways vulnerable to nutrient or toxin accumulation, and up to 55% of the area of the greenfield site planted in indigenous species (Regis Park, New Zealand). Reduced demand for potable water would enable continued undiluted use of 'pure' water sources from limited bush catchments (Waitakere Ranges, New Zealand), and less dependence on rivers stressed by low flows. Reductions and dispersion of sewage effluent discharges protects receiving waters, such as Port Phillip Bay, Melbourne, from eutrophication. Reduced stormwater discharge favours retention of the natural hydrological regime of rivers and minimises bioaccumulation of toxins in aquatic ecosystems.     

Resource management as a key factor for sustainable urban planning

Due to fast urbanization and increasing living standards, the environmental sustainability of our global society becomes more and more questionable. In this historical review we investigate the role of resources management (RM) and urban planning (UP) and propose ways for integration in sustainable development (SD). RM follows the principle of circular causation, and we reflect on to what extent RM has been an element for urban planning. Since the existence of the first settlements, a close relationship between RM, urbanization and technological development has been present. RM followed the demand for urban resources like water, energy, and food. In history, RM has been fostered by innovation and technology developments and has driven population growth and urbanization. Recent massive resource demand, especially in relation to energy and material flows, has altered natural ecosystems and has resulted in environmental degradation. UP has developed separately in response to different questions. UP followed the demand for improved living conditions, often associated to safety, good manufacturing and trading conditions and appropriate sanitation and waste management. In history UP has been a developing research area, especially since the industrial era and the related strong urbanization at the end of the 18th century. UP responded to new emerging problems in urban areas and became increasingly complex. Nowadays, UP has to address many objectives that are often conflicting, including, the urban sustainability. Our current urban un-sustainability is rooted in massive resource consumption and waste production beyond natural limits, and the absence of flows from waste to resources. Therefore, sustainable urban development requires integration of RM into UP. We propose new ways to this integration.