纳米气敏材料的研究现状与发展

各种气体尤其是可燃性气体和毒性气体的检测监控已成为当前急需解决的问题，纳米气敏材料的研究对提高气敏材料的灵敏度、选择性和长期稳定性，以及如何降低工作温度和缩短响应温度时间等方面起着重大的作用。针对氢气、硫化氢、碳氢化合物、氮氧化合物、乙醇、丙酮等气体的纳米气敏材料的研究现状作了一定的研究，并对发展的趋势作了展望。     

纳米气敏材料的研究与发展趋势

各种气体尤其是对可燃性气体和毒性气体的检测和监控已成为企业当前急需解决的问题之一。纳米技术对提高气敏材料的灵敏度、选择性和长期稳定性有重要的作用,并且能降低工作温度和缩短温度的响应时间。文中论述了氢气、硫化氢、碳氢化合物、氮氧化合物、乙醇、丙酮等气体的纳米气敏材料的研究现状,并对其发展的趋势进行了预测。     

SO_2气敏电极的研制及扩大应用

本文用自制二甲基硅橡胶作为气透膜制成一种SO_2气敏电报,电极的线性响应范围与内充电解质NaHSO_3的浓度有关。CO_2气敏电极可以用SO_2气敏电极骨架将NaHSO_3内充电解质改为NaHCO_3制成。     

碳酸丙烯酯脱除沼气中CO2工艺分析

沼气是清洁的可再生能源,但含碳量较高,不满足管输要求。通过HYSYS软件应用SRK方程对碳酸丙烯酯脱碳流程进行模拟分析,考察吸收气液比、吸收压力、气提气液比、碳酸丙烯酯贫液进料温度、预处理沼气的进料温度、吸收塔板数对脱碳效果的影响:净化气中CO2的含量随着吸收气液比的增大逐渐增大,脱碳率随之减小,但吸收气液比在10~30时,净化气中的CO2含量变化不大;随着吸收塔板数的增加,净化气中的CO2摩尔含量逐渐减小,脱碳率逐渐上升,当塔板数小于10时,脱碳效果明显,当塔板数超过10时,对脱碳效果影响较小。     

大气CO2、CH4、CO混合标气配制方法及仪器故障维修

标气对于高精度大气温室气体浓度观测至关重要,本文对组装的混合标气配制系统组成、原理和混合标气配制方法进行了简单的描述,并给出系统的RIX泵常见故障、解决办法和日常维护。本方法配制的标气已广泛应用于我国大气本底站CO2、CH4、CO高精度观测,完全符合世界气象组织/全球大气观测(WMO/GAW)质量要求。     

炭黑/聚苯乙烯复合材料在环境监测方面的应用

制备炭黑/聚苯乙烯(CB/PS)导电气敏复合材料。实验结果表明:复合材料在多种有毒有害有机蒸汽中都有很好的电阻气敏响应性。因此,炭黑/聚苯乙烯导电复合材料在用作气体传感器和电子鼻方面检测空气中的气体污染具有广阔的应用前景。     

CO2驱油封存区域土壤气监测技术及应用

针对二氧化碳驱油封存技术（CO2-EOR）国内尚无通用的环境监测方法的情况下,文章提出了土壤气CO2的通量以及13C监测的重要性,并结合胜利油田CO2-EOR项目开展的环境监测工作,提出了几点监测过程值得注意的问题：为识别CO2泄漏风险,注气前的环境监测数据至关重要;监测区域除了涵盖注气井和采油井,必须考虑注气过程中CO2地下运移的范围,但目前尚无明确的方法计算延伸的距离;在数据分析和挖掘过程中,由于参数的表征方式不同,借助统计学分析软件的类比功能实现监测方法之间的相互印证.     

EF-2型(T703)氧化铁精脱硫剂

由长沙市望岳化工厂开发、湖南省环境保护局推荐的EF-2型氧化铁精脱硫剂适用于天然气、焦炉煤气、水煤气、甲烷原料气、冶金工艺气、精细化工原料气、食品级CO2气等气体中H2S的精脱除。主要技术内容上述原料气中的H2S与氧化铁反应生成硫化亚铁、多硫化铁、单质硫和水:Fe2O3(特种) H2S→FeS FeSx S H2O典型规模天津大港油田天然气公司3.6亿m3液化气处理、回收装置。主要技术指标及条件要求一、技术指标H2S脱除精度≤0.03×10-6,原粒度工作硫容≥15%,原粒度侧压强度≥50N/cm,耐水性:水煮2h、浸泡24h不粉化。二、条件要求空速1000～20…     

合成氨原料气醇烃化精制工艺

由湖南安淳高新技术有限公司开发的合成氨原料气醇烃化精制工艺,适用于合成氨工业原料气净化精制. 主要技术内容 一、基本原理 合成氨原料气醇烃化精制新工艺的基本原理是利用醇醚化、烃化两个反应过程将合成气中的CO、CO,清除至10ppm以下,其化学反应方程式如下:     

合成氨原料气醇烃化精制工艺

由湖南安淳高新技术有限公司开发的合成氨原料气醇烃化精制工艺适用于合成氨工业和制氢工业。主要技术内容一、基本原理利用醇醚化、烃化两个化学反应过程将合成气中的CO、CO2体积分数减小至10×10-6以下,达到精制的目的。主要化学反应方程式如下:醇醚化:CO 2H2=CH3OHCO2 3H2=CH3OH H2O烃化:(2n 1)H2 nCO=CnH(2n 2) nH2O2nH2 nCO=CnH2n nH2O2nH2 nCO=CnH(2n 2)O (n-1)H2O(3n 1)H2 nCO2=CnH(2n 2) 2nH2O二、技术关键1.采用独特的分子技术解决了反应过程中热平衡问题,同时减小了反应塔阻力,增加了催化剂的装填量,提高了系…     

高含CO2天然气运输管道缓蚀剂的筛选

大多数天然气藏CO2含量为10%~98%,CO2在不同的温度、压力条件下腐蚀极其严重。文章主要针对高含CO2天然气运输管道腐蚀的问题,开展缓蚀剂的筛选,重点开展CO2腐蚀规律研究与实验,评价环境温度、CO2分压、流动速度对腐蚀规律的影响,明确缓蚀剂的影响因素,结合管材的材质,优选评价不同类型的缓蚀剂,缓蚀效率分别为90.53%和92.64%,在管道凝液介质的气相及液相中都有较高的缓蚀效率。通过设计现场加药工艺及制度,监测评价缓蚀剂缓释效果和腐蚀情况,可防止管道运输过程中CO2腐蚀的侵害,长输管线内腐蚀控制良好。     

天然气脱硫回收工艺的职业病危害及防护措施

天然气中常含有硫化氢、一氧化碳和有机硫等酸性组分,酸性组分的存在会造成金属腐蚀、环境污染并进而危害人体健康等。文章简单介绍了天然气脱硫净化及硫磺回收工艺,重点对天然气生产过程中所产生的硫化氢、甲烷、硫磺、二氧化硫、一氧化碳、氮氧化物、噪声、高温等职业病危害因素进行了识别,分析并介绍了其影响及防护措施。     

Designing reverse-flow packed bed reactors for stable treatment of volatile organic compounds

Reverse-flow packed bed reactors can be used to treat gaseous pollutants from chemical plants. This article describes the design and operation of a modified reverse-flow reactor (MRFR) which has a recuperator on each end of the reactor and a reaction zone in the middle. The recuperators have low thermal dispersion and the reaction zone has a high thermal dispersion, obtained by placing metal inserts into the bed, parallel with the gas flow. Performance of the MRFR during extended lean and rich conditions is determined with analytical analysis and compares well with numerical simulations of CO oxidation; however, the theory is expected to be useful for any reaction kinetics. A major advantage of this MRFR design is an extended time for the reactor to extinguish during lean conditions. This work also describes MRFR performance with internal reactor cooling, which can be used as a control mechanism to maintain reactor temperature for proper removal of volatile organic compounds.     

Drying of granulated wood ash by flue gas from saw dust and natural gas combustion

At the district heating plant of Kalmar, Sweden an on-line unit for production of granulated wood ash for nutrient recycling on forest soils is being applied. Currently, the granules are dried by hot air from an oil-fired burner. The objective of this work was to investigate how drying by flue gas affects the hardening of granules, or impacts their chemical composition and properties. Ninety-six granule samples were treated by flue gas from natural gas combustion in a laboratory pilot scale flue gas generator. CO₂, CO, O₂, C₃H₈ and NO concentrations were varied during the experiment. Additionally, some samples were treated by flue gas from combustion of sawdust at the heating plant in Kalmar. Drying by flue gases did not affect the chemical composition of granules, but minor effects were seen in their mineralogy. The carbonate content was slightly higher in granules treated with flue gas from natural gas combustion compared to the granules dried by hot air only, when measured by wet chemical methods. Results from XRD analysis imply that the calcite content is higher and the portlandite and arcanite content slightly less in granules treated with flue gas from sawdust combustion compared to the granules dried by hot air only. The results from this investigation showed no negative effects on ash granule composition or physical structure by the use of a flue as a drying medium.     

有色金属行业CO2排放估算方法研究

通过对国内外有色金属行业温室气体排放估算方法研究现状的分析,将联合国政府间气候变化专门委员会(IPCC)温室气体排放清单指南、国际有色行业协会和环境科学研究中的一些常用算法,总结归纳应用于有色金属行业温室气体的排放量估算,从估算方法和结果上分析各种方法的优缺点和使用条件。以原铝生产CO2排放估算为例,对有色金属温室气体排放进行实证分析,为有色金属行业温室气体排放估算提供参选方法,促进有色金属工业的节能减排。     

神农丹农药恶臭废气资源化治理研究

采用资源化治理方式,对神农丹农药废气进行治理研究,结果表明:选择安全环保的氧化剂,将具有恶臭气味的二甲基硫醚废气氧化成无臭的二甲基亚砜.通过对反应时间、物料配比、反应温度、铁屑催化的实验研究,优化了工艺条件,将二甲基硫醚彻底氧化为二甲基亚砜,使污染物变废为宝,并在华阳集团建成了治理装置,实现了资源化和无害化治理.     

Enhancing forest carbon sequestration in China: toward an integration of scientific and socio-economic perspectives

This article serves as an introduction to this special issue, "China's Forest Carbon Sequestration", representing major results of a project sponsored by the Canadian International Development Agency and the Chinese Academy of Sciences. China occupies a pivotal position globally as a principle emitter of carbon dioxide, as host to some of the world's largest reforestation efforts, and as a key player in international negotiations aimed at reducing global greenhouse gas emission. The goals of this project are to develop remote sensing approaches for quantifying forest carbon balance in China in a transparent manner, and information and tools to support land-use decisions for enhanced carbon sequestration (CS) that are science based and economically and socially viable. The project consists of three components: (i) remote sensing and carbon modeling, (ii) forest and soil assessment, and (iii) integrated assessment of the socio-economic implications of CS via forest management. Articles included in this special issue are highlights of the results of each of these components.     

Emission of CO2, CH4 and N2O from freshwater marsh in northeast of China

The wetlands play an important role in carbon storage, especially at high latitudes, at which they store nearly one-third of global soil carbons. However, few studies have investigated the emissions of CO(2), CH(4) and N(2)O in the long-term, especially effects of freeze-thaw cycles on these gases emissions in freshwater marsh ecosystems. In this paper, we collected greenhouse gas emission data from a freshwater marsh area in China for 4 years, evaluated their release variables and speculated on their potential atmospheric impact. For this paper, we report on the CO(2), CH(4) and N(2)O emission rates recorded from June 2002 to November 2005 in the Sanjiang Plain of northeast China. We measured their interannual variations and fluctuations, as well as factors affecting their emissions, and estimated their regulation and freeze-thaw cycle impacts. Our results revealed obvious CO(2) and CH(4) emission fluctuations during the winter months, and during the freeze-thaw cycle, and a strong interannual variation during the growing season. Overall, we documented a close relationship between the CO(2) and CH(4) emissions, implicating some regulatory commonality. We determined that the marsh was a N(2)O sink during the winter, but a significant source of N(2)O during the freeze-thaw cycle as the temperature increased, especially in early summer. During the thaw-freeze period, the N(2)O levels were positively correlated with the water depth. Additionally, water depth greatly governed the interannual variation of the N(2)O emissions from the marshes during the thaw-freeze period.     

有色金属行业CO2排放估算方法研究

通过对国内外有色金属行业温室气体排放估算方法研究现状的分析，将联合国政府间气候变化专门委员会（IPCC）温室气体排放清单指南、国际有色行业协会和环境科学研究中的一些常用算法，总结归纳应用于有色金属行业温室气体的排放量估算，从估算方法和结果上分析各种方法的优缺点和使用条件。以原铝生产CO2排放估算为例，对有色金属温室气体排放进行实证分析，为有色金属行业温室气体排放估算提供参选方法，促进有色金属工业的节能减排。     

Sorption-enhanced hydrogen production for pre-combustion CO2 capture: Thermodynamic analysis and experimental results

Hydrotalcite-based materials have been identified as suitable materials for high temperature (400 °C) adsorption of CO₂. In pre-combustion decarbonisation processes for natural gas based power cycles, it should be possible to use this material to improve conversions in the water-gas shift (WGS) and steam-reforming (SMR) reaction. The efficiencies for electricity production from natural gas have been calculated for some different system configurations, in which hydrotalcite-based material could be used. The calculated efficiency penalties ranged from 5.5 to 8.6 percentage points. The assumptions made in the system study have been tested on the laboratory scale. Hydrotalcite-based materials are found to be an excellent choice for use in the sorption-enhanced WGS reactor. The requirements for very low residual concentrations of CO₂ at 400 °C and large amounts of catalyst in the sorption-enhanced SMR reactor make its application less likely. Suggestions are made to how the SE-SMR could be improved.