Impacts of Multiple Stresses on Water Demand and Supply Across the Southeastern United States1

Abstract: Assessment of long‐term impacts of projected changes in climate, population, and land use and land cover on regional water resource is critical to the sustainable development of the southeastern United States. The objective of this study was to fully budget annual water availability for water supply (precipitation ? evapotranspiration + groundwater supply + return flow) and demand from commercial, domestic, industrial, irrigation, livestock, mining, and thermoelectric uses. The Water Supply Stress Index and Water Supply Stress Index Ratio were developed to evaluate water stress conditions over time and across the 666 eight‐digit Hydrologic Unit Code basins in the 13 southeastern states. Predictions from two Global Circulation Models (CGC1 and HadCM2Sul), one land use change model, and one human population model, were integrated to project future water supply stress in 2020. We found that population increase greatly stressed water supply in metropolitan areas located in the Piedmont region and Florida. Predicted land use and land cover changes will have little effect on water quantity and water supply‐water demand relationship. In contrast, climate changes had the most pronounced effects on regional water supply and demand, especially in western Texas where water stress was historically highest in the study region. The simulation system developed by this study is useful for water resource planners to address water shortage problems such as those experienced during 2007 in the study region. Future studies should focus on refining the water supply term to include flow exchanges between watersheds and constraints of water quality and environmental flows to water availability for human use.     

CONTRASTING WATER QUALITY FROM PAIRED DOMESTIC/PUBLIC SUPPLY WELLS,CENTRAL HIGH PLAINS1

ABSTRACT: Closely located domestic and public supply wells were sampled using identical sampling procedures to allow comparison of water quality associated with well type. Water samples from 15 pairs of wells with similar screened intervals completed in the central High Plains regional aquifer in parts of Kansas, Oklahoma, and Texas were analyzed for more than 200 water quality constituents. No statistically significant differences were observed between the concentrations of naturally‐derived constituents (major ions, trace elements, and radon) in paired wells. However, differences in water quality between paired wells were observed for selected anthropogenic compounds (pesticides and tritium), in that some public supply wells produced water that was more recently recharged and contained constituents derived from surface activities. The presence of recently recharged water and compounds indicative of anthropogenic activities in some public supply wells was likely due to operational variations (pumping rate and pumping cycles), as demonstrated in a particle tracking simulation. Water containing surface‐derived anthropogenic compounds from near the water table was more quickly drawn to high volume public supply wells (less than five years) than domestic wells (greater than 120 years) with small pumping rates. These findings indicate that water quality samples collected from different well types in the same area are not necessarily directly comparable. Sampling domestic wells provides the best broad‐scale assessment of water quality in this aquifer setting because they are less susceptible to localized contamination from near the water table. However, sampling public supply wells better represents the quality of the used resource because of the population served.     

CLIMATE CHANGE IMPACTS ON WATER RESOURCES OF THE TSENGWEN CREEK WATERSHED IN TAIWAN1

ABSTRACT: This study presents a methodology to evaluate the vulnerability of water resources in the Tsengwen creek watershed, Taiwan. Tsengwen reservoir, located in the Tsengwen creek watershed, is a multipurpose reservoir with a primary function to supply water for the ChiaNan Irrigation District. A simulation procedure was developed to evaluate the impacts of climate change on the water resources system. The simulation procedure includes a streamflow model, a weather generation model, a sequent peak algorithm, and a risk assessment process. Three climate change scenarios were constructed based on the predictions of three General Circulation Models (CCCM, GFDL, and GISS). The impacts of climate change on streamflows were simulated, and, for each climate change scenario, the agricultural water demand was adjusted based on the change of potential evapotranspiration. Simulation results indicated that the climate change may increase the annual and seasonal streamflows in the Tsengwen creek watershed. The increase in streamflows during wet periods may result in serious flooding. In addition, despite the increase in streamflows, the risk of water deficit may still increase from between 4 and 7 percent to between 7 and 13 percent due to higher agricultural water demand. The simulation results suggest that the reservoir capacity may need to be expanded. In response to the climate change, four strategies are suggested: (1) strengthen flood mitigation measures, (2) enhance drought protection strategies, (3) develop new water resources technology, and (4) educate the public.     

TRANSIENT WATER QUALITY MODELING IN STREAMS1

ABSTRACT. A general planning model for simulation of water quality in streams and canals is formulated and verified. The model simulates the temporal and spatial variations in conservative and nonconservative constituents. The nitrogen cycle and its interaction with other nutrients and the dissolved oxygen resources of the stream are included. A fully implicit finite difference approximation is used to solve the mass transport equations describing variations in constituent concentrations throughout the stream systems. The model is applied to the Truckee River in northern California. Results indicate the applicability of the model for assessing the impact of alternative water quality management strategies on the stream system.     

THE DEVELOPMENT OF A MODEL TO EVALUATE HYDROLOGIC RISK IN WATER RESOURCE SYSTEM DESIGN1

In this paper, a procedure for analyzing a water resource system with special emphasis on evaluation of acceptable economic risk due to occasional failures to deliver water is proposed. The basic methodology includes the development of a simple mathematical model which describes the physical hydrologic and economic characteristics of a single reservoir irrigation and city water supply system and an evaluation of economic benefits of the system with full and partial deliveries of water. The system is simulated for various combinations of decision variables (system magnitudes) and an optimum design is obtained by response surface technology. Emphasis is placed on the basic model and methodology although, in order to introduce some realism, the procedure is applied to data based on the existing reservoir system on the South Concho River in West Central Texas.     

THE EFFECTS OF WATER RESOURCES DEVELOPMENT ON ESTUARINE ENVIRONMENTS1

ABSTRACT. The Texas Water Development Board, the principal water resource planning agency of the State, has been conducting extensive estuarine data collection activities and associated research to determine the required quantity and quality of fresh water inflows necessary to maintain various environmental conditions in Texas estuaries to preserve the estuarine ecosystems. These activities are a consequence of a statutory directive to the Board to make provisions in its State Water Plan for the effects of upstream water resource development on the associated estuaries. This paper reports on the results of the first phase of an extensive estuarine research project. The objectives of the research project are to (1) define the interrelationships between estuarine ecosystems and fresh water and nutrient inflows, and (2) develop and test quantitative simulation techniques which describe these relationships. In order to accomplish the first objective, physical and chemical water quality data and biological data on the estuarine ecosystems are being collected, compiled and analyzed. The second objective is being satisfied by the development of hydrodynamic and ecologic simulation models of the estuarine environment.     

Effect of reservoir flushing on downstream river water quality

The effect of short-term reservoir flushing on downstream water quality in the Geum River, Korea was studied using field experiments and computer simulations. The reservoir release was increased from 30 to 200 m(3)/s within 6 h for the purpose of this experiment. The flushing discharge decreased the concentrations of soluble nitrogen and phosphorus species considerably, but the experimental results revealed a negative impact on organic forms of nutrients and biochemical oxygen demand (BOD). A dynamic river water quality model was applied to simulate the river hydraulics and water quality variations during the event. The model showed very good performance in predicting the travel time of flushing flow and the variations of dissolved forms of nitrogen and phosphorus constituents. However, it revealed a limited capability in simulating organic forms of nutrients and BOD because it does not consider the re-suspension mechanism of these constituents from sediment during the wave front passage.     

SIMULATION OF SPATIAL AND TEMPORAL CHANGES IN WATER QUALITY WITHIN A HYDROLOGIC UNIT1

Water quality must be considered in the development and planning aspects of water resource management. To accomplish this, the decision-maker needs to have at his disposal a systematized procedure for simulating water quality changes in both time and space. The simulation model should be capable of representing changes in several parameters of water quality as they are influenced by natural and human factors impinging on the hydrologic system. The objective of this work is two-fold. The first goal is to demonstrate the feasibility of developing and utilizing a water quality simulation model in conjunction with a hydrologic simulation model. The model represents water quality changes in both time and space in response to changing atmospheric and hydrologic conditions and time-varying waste discharges at various points in the system. This model has been developed from and verified with actual field data from a prototype system selected for this purpose. The second aim is to set forth procedural guidelines to assist in the development of water quality simulation models as tools for use in the quality-quantity management of a hydrologic unit.     

Water Dispatch Model for Middle Route of a South‐to‐North Water Transfer Project in China1

Chang, Jian‐xia, Yi‐min Wang, and Qiang Huang, 2011. Water Dispatch Model for Middle Route of a South‐to‐North Water Transfer Project in China. Journal of the American Water Resources Association (JAWRA) 47(1):70‐80. DOI: 10.1111/j.1752‐1688.2010.00478.x Abstract: The objective of this paper is to present a simulation model to address the water dispatch problem of the south‐to‐north water transfer project for the Middle Route system in China. Reasonable rules and a system network structure are established. This model consists of five modules: (1) a data‐processing module, (2) an initial control module, (3) a multisource simulation dispatch module, (4) a system identification module, and (5) a revision module. Water allocated to each province and city along the route is obtained by simulation, and the long‐term operation results show that water supply reliabilities are significantly improved if the transferred water is jointly dispatched with the local water resources.     

ASSESSING GROUND WATER POLLUTION POTENTIAL FROM NITROGEN FERTILIZER USING A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: A geographic information system (GRASS 3.1) was used to correlate the availability of nitrogen fertilizer with the susceptibility of ground water to pollution in Texas to identify potential ground water quality problems. An agricultural pollution susceptibility map, produced by the Texas Water Commission using the DRASTIC methodology, was combined with information on cropped areas, recommended nitrogen fertilizer application rates, and aquifer outcrops. A Nitrogen Fertilizer Pollution Potential Index was generated, identifying 24 percent of Texas within the high pollution potential category An analysis of the susceptibility of major aquifer outcrops to potential pollution from nitrogen fertilizer indicated that 34 percent of the outcrop areas fall in the high pollution potential range. It is proposed that correlating the availability of a pollutant with an assessment of the susceptibility of ground water to pollution yields a more accurate screening tool for identifying potential pollution problems than considering susceptibility alone.     

Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin,Nevada1

Carroll, Rosemary W.H., Greg Pohll, David McGraw, Chris Garner, Anna Knust, Doug Boyle, Tim Minor, Scott Bassett, and Karl Pohlmann, 2010. Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin, Nevada. Journal of the American Water Resources Association (JAWRA) 46(3):554-573. DOI: 10.1111/j.1752-1688.2010.00434.x Abstract: An integrated surface water and groundwater model of Mason Valley, Nevada is constructed to replicate the movement of water throughout the different components of the demand side of water resources in the Walker River system. The Mason Valley groundwater surface water model (MVGSM) couples the river/drain network with agricultural demand areas and the groundwater system using MODFLOW, MODFLOW’s streamflow routing package, as well as a surface water linking algorithm developed for the project. The MVGSM is capable of simulating complex feedback mechanisms between the groundwater and surface water system that is not dependent on linearity among the related variables. The spatial scale captures important hydrologic components while the monthly stress periods allow for seasonal evaluation. A simulation spanning an 11-year record shows the methodology is robust under diverse climatic conditions. The basin-wide modeling approach predicts a river system generally gaining during the summer irrigation period but losing during winter months and extended periods of drought. River losses to the groundwater system approach 25% of the river’s annual budget. Reducing diversions to hydrologic response units will increase river flows exiting the model domain, but also has the potential to increase losses from the river to groundwater storage.     

Water Prism: A Tool to Assess Water Availability Risk and Investigate Water Management Strategies

Water availability risk is a local issue best understood with watershed‐scale quantification of both withdrawal and consumptive demands in the context of available supply. Collectively, all water use sectors must identify, understand, and respond to this risk. A highly visual and computationally robust decision support tool, Water Prism, quantitatively explores mitigation responses to water risk on both a facility‐level and basin‐aggregated basis. Water Prism examines a basin water balance for a 40‐ to 60‐year planning horizon, distinguishes among water use sectors, and accounts for ecosystem water needs. The 2012 Texas State Water Plan was used to apply Water Prism to the Big Cypress‐Sulphur Basin (Texas). The case study showed Water Prism to be an accurate and convenient tool to provide fine‐scale understanding of water use in the context of available supply, evaluate multi‐sector combinations of conservation strategies, and quantify the effects of future demands and water availability. Analyses demonstrated water availability risks for rivers and reservoirs can vary within a basin and must be calculated independently, simulation of water balance conditions can help illuminate potential impacts of increasing demands, and scenario simulations can be used to evaluate relative conservation efficacy of different water resource management strategies for each sector. Based on case study findings, Water Prism can serve as a useful assessment tool for regional water planners.     

FLEXIBLE PRICING IN WATER SUPPLY PLANNING–FOR FLEXIBLE ENGINEERS1

ABSTRACT. Preliminary results from a digital simulation model designed to test time-varying water pricing policies are presented. Stochastic inflows feeding a water supply reservoir are assumed for a hypothetical community with defined demand functions. Prices are allowed to vary as a function of reservoir level, generally rising as reservoir levels fall. Increasing, decreasing and constant rates are tested. It is concluded that varying the price to reflect the increased value of scarce supplies can greatly reduce the risk of water supply shortages. It is also concluded that varying incremental (conservational) pricing policies not only reduces the risk of shortages, but also lowers the average price to the community while rewarding the low consumption user with lower average rates.     

WATER USE RELATIONSHIPS AND PROJECTION CORRESPONDING WITH REGIONAL GROWTH,SEATTLE REGION1

ABSTRACT: The paper outlines both the methods used and the results obtained in a study of the demand for municipal and industrial water for the Seattle region. The study was made as part of a regional water management study program, one objective of which is to “… identify, quantify, and set priorities for all current and future water uses …”. A basic concept in the study of municipal and industrial water use is that the demand for water is derived from the demand for output and the direct services that water provides. Principal characteristics of the study are: (1) Water use is studied by type - residential, commercial, industrial and public -with identification of factors affecting each; (2) Water demands are studied by season as well as on an annual basis; (3) Projections of future water use are tied directly to projections of economic change in the service area; and (4) The effects of alternative policies on water use are estimated. Water use levels are projected under alternative regional growth assumptions provided by the Puget Sound Governmental Conference, a regional planning agency. Thus, the water use planning is consistent with other regional planning programs in this respect. The results can be varied according to changes in specific factors affecting water use. The factors considered in the present study include: single-family residential lot size, distribution of population between single- and multi-family units, per capita water use by multi-family unit residents, and industrial and commercial water use per employee. An income elasticity of demand was estimated for single-family residential water use.     

WATER QUALITY SIMULATION AND PUBLIC LAW 92–500 Case Study: Southwestern Illinois1

ABSTRACT: Section 208 of the Federal Water Pollution Control Act Amendments of 1972 has provided the Southwestern Illinois Metropolitan and Regional Planning Commission (SIMAPC) with a unique opportunity for comprehensive planning of the region's water quality. SIMAPC initiated the 208 study by researching available technology for the analysis of point and nonpoint sources of pollution and establishing criteria by which to judge the various technniques. This led to SIMAPC'S choice of continuous simulation of stream and reservoir water quality as the most appropriate analytical tool for their needs. A continuous simulation model was calibrated and verified on three basins in the SIMPAC region. It was then used to produce load source analysis, pollution event frequency analysis, and pollution event duration analysis for ten pollutants under existing stream conditions and then under alternative future conditions. These results enabled the weighting of pollutant sources, analysis of the effectiveness of control measures, and quantitative analysis of the marginal benefit of each alternative.     

MODELING THE EFFECT OF BRUSH CONTROL ON RANGELAND WATER YIELD1

ABSTRACT: With the increase in water demand in Texas, attention has turned to improving water yield by brush control on rangeland watersheds. Several hydrologic models have been developed for either farmland or rangeland. However, none of the models were specifically developed to assess the impact of brush control on rangeland water yield. Yet, modeling the impact of brush control on water yield needs to be considered if alternative techniques are to be compared. Two models, Ekalaka Rangeland Hydrology and Yield Model (ERHYM-II) and Simulator for Water Resources on Rural Basins (SWRRB) were selected. The Soil Conservation Service curve number (SCS-CN) method is used in both models to predict surface runoff from each rainfall event. The major differences between the ERHYM-II and SWRRB models are the evapotranspiration, soil water routing, and plant growth components. The models were evaluated on brush-dominated and chemically and mechanically brush-controlled range watersheds in Texas. Results indicated that both models were capable of simulating soil water and water yield from brush dominated and chemically brush-controlled range watersheds. The models were not able to predict water yield from the mechanically brush-controlled (root plowed) watershed with acceptable accuracy. The depressions that were caused by root plowing stored surface runoff and reduced water yield from the watershed. Information about the size of depressions was not available for further model evaluation.     

Simulating the Impacts of Irrigation Levels on Soybean Production in Texas High Plains to Manage Diminishing Groundwater Levels

There is an increasing need to strategize and plan irrigation systems under varied climatic conditions to support efficient irrigation practices while maintaining and improving the sustainability of groundwater systems. This study was undertaken to simulate the growth and production of soybean [Glycine max (L.)] under different irrigation scenarios. The objectives of this study were to calibrate and validate the CROPGRO‐Soybean model under Texas High Plains’ (THP) climatic conditions and to apply the calibrated model to simulate the impacts of different irrigation levels and triggers on soybean production. The methodology involved combining short‐term experimental data with long‐term historical weather data (1951–2012), and use of mechanistic crop growth simulation algorithms to determine optimum irrigation management strategies. Irrigation was scheduled based on five different plant extractable water levels (irrigation threshold [ITHR]) set at 20%, 35%, 50%, 65%, and 80%. The calibrated model was able to satisfactorily reproduce measured leaf area index, biomass, and evapotranspiration for soybean, indicating it can be used for investigating different strategies for irrigating soybean in the THP. Calculations of crop water productivity for biomass and yield along with irrigation water use efficiency indicated soybean can be irrigated at ITHR set at 50% or 65% with minimal yield loss as compared to 80% ITHR, thus conserving water and contributing toward lower groundwater withdrawals. Editor's note: This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

RURAL RESIDENTIAL WATER DEMAND: AN ECONOMETRIC AND SIMULATION ANALYSIS1

ABSTRACT: This study proposes that demand management through pricing policies can be used in conjunction with supply management to solve water supply problems. Economic principles are shown to apply to rural residential water use. A demand function for water was developed based on cross-sectional water use data collected in Kentucky. Price was found to be a significant determinant of the quantity of water demanded. A constant price elasticity of -0.92 was found. The demand function was used in a simulation analysis to determine reservoir capacity needed to supply water needs of a rural community. The simulation revealed that price can significantly affect required reservoir storage.     

OPTIMIZATION IN MUNICIPAL WATER SUPPLY SYSTEM DESIGN1

ABSTRACT. The design of a municipal water supply system may involve utilizing singly or in combination a conventional water supply, a desalted water supply, and a supply from a recharged aquifer reservoir. Optimization of the design requires a model formulated in a way that modern methods of systems analysis can be used. This study concerns the formulation, solution, and evaluation of a mathematical model of a municipal water supply system that includes a supply from a variable quality output desalting plant. The combined system is operated in conjunction with an artificially recharged aquifer reservoir. Also considered are short periods of water shortages. The model is set up in an approximate linear programming format, and the optimum solution (minimum cost) is found. The model is tested by applying it to the design of a supply system to meet the 1985 estimated water demand of the city of Lincoln, Nebraska. Results of this test indicate that the artificial reservoir and the existing conventional supply system are capable of supplying that demand during all but the peak period. An electrodialysis desalting system is used in this analysis. It is competitive only when the length of transmission pipeline for a conventional supply system approaches 90 miles. The model is formulated in a general way so that it can be applied to almost all situations encountered in municipal water supply design, as well as to the specific system designated for this study.     

MODELING AND CONTROL OF THE POLLUTION OF WATER RESOURCES SYSTEMS VIA MULTILEVEL APPROACH1

ABSTRACT. The problem of modeling and control of water pollution is considered. A general mathematical model, where the pollution effluent is discharged directly into the river, into the lake, or into a bypass pipe leading to an advanced Waste Water Treatment (AWT) plant, is developed. The Water Resource System (WRS) under consideration is decomposed into N subsystems. The pollution effluent input vector to each subsystem includes the water quantity and different water characteristics such as BOD, DO, pH, conductivity, temperature, algae, phosphates, nitrates, etc. Treatment cost functions and quality transition functions as well as system model constraints are introduced, where all functions can be nonlinear. A system Lagrangian is formed to incorporate the system constraints and coupling. The Lagrangian is decomposed into N independent subsystems, and a two level optimization methodology is introduced. Each subsystem is independently and separately minimized at the first level assuming known Lagrange multipliers. At the second level, the total Lagrangian is maximized with respect to the Lagrange multipliers using optimal values for effluent inputs from all subsystems obtained from the first level. Economic interpretation on the Lagrange multipliers reveals that they are merely prices imposed by the central authority (second level) for the pollution caused by the subsystems. Advantages of the multilevel approach are discussed.