Hydro-abrasive erosion in hydro turbines: a review

The flow of sediment particles in rivers is a big challenge to develop hydropower plants across the sediment-laden rivers. Hard particles such as quartz and feldspar are available in high amount in the Asian mountain range. The abrasive action of these particles causes the hydro turbines to suffer from erosion in particular at high- and medium-head hydroelectric power plants. This has become a serious economic issue due to maintenance costs and production losses. The treatment without prevention is simply unsustainable. Facilities for sediment exclusion, typically sand traps as well as turbine design, and materials have been improved considerably. In the present paper, studies have been discussed extensively undertaken by several investigators in this field. Based on literature survey several aspects related to reducing the sediment load on turbines, useful ways to improve the turbine surface performance and various erosion models to characterize the effect of erosion on the performance of turbines have been discussed. To calibrate and validate the developed erosion models, more measurements from both physical model tests in laboratories and continuous monitoring of sediment parameters and their impact on the operational hydro turbines are required. As well as the state-of-art in the modeling and simulation using computational fluid dynamics (CFD) has made it possible to optimize the hydraulic design of hydro turbines in order to minimize the erosion level without much sacrifice in the efficiency. To mitigate the hydro-abrasive erosion effects on the performance of turbines, significant improvements have been achieved so far and development is ongoing.     

SALMONID SMOLT SURVIVAL RELATIVE TO TURBINE EFFICIENCY AND ENTRAINMENT DEPTH IN HYDROELECTRIC POWER GENERATION1

ABSTRACT: The hypotheses that fish survival probabilities may be lower (1) at less than peak operating turbine efficiency; (2) at deeper entrainment depth; and (3) with the deployment of extended‐length intake guidance screens, are not supported by results on yearling chinook salmon smolts (Oncorhynchus tshawytscha) at Lower Granite Dam, Snake River, Washington. Estimated 96 h survival probabilities for the six test conditions ranged from 0.937 to 0.972, with the highest survival at turbine operating towards the lower end of its efficiency. A blanket recommendation to operate all Kaplan type turbines within ± 1 percent of their peak efficiency appears too restrictive. Cavitation mode survival (0.946) was comparable to that at peak operating efficiency mode (0.937), as was the survival between upper (0.947) and mid depths (0.937). Survival differed only slightly among three turbine intake bays at the same depth (0.937 to 0.954), most likely due to differential flow distribution. Extended‐length intake fish guidance screens did not reduce survival. However, the sources of injury somewhat differed with depth; probable pressure and shear‐related injuries were common on fish entrained at mid‐depth, and mechanically‐induced injuries were common at upper depth. Operating conditions that reduce turbulence within the turbine environment may enhance fish survival; however, controlled experiments that integrate turbine flow physics and geometry and the path entrained fish traverse are needed to develop specific guidance to further enhance fish passage survival.     

Wind energy potential analysis for Thailand: Uncertainty from wind maps and sensitivity to turbine technology

Rapid development of wind energy has been witnessed in Thailand. However, different wind resource maps (over land) have brought great uncertainty to wind energy planning. Here, four important mesoscale wind maps were considered: DEDP (2001), World Bank (2001), Manomaiphiboon et al. (2010) of JGSEE, and DEDE (2010). The wind maps were first harmonized to a common grid at 100 m and then compared. The earlier wind maps (DEDP and World Bank) are shown to represent the lower and upper limits of predicted speed, respectively, while JGSEE and DEDE tend to be more moderate with predictions statistically closer to observations. A consolidated wind map was constructed based on their median and shown to have the best prediction performance. It was then used for the technical potential analysis, in which three large (2-MW) turbine models (two conventional and one designed for low wind speed) were considered. By GIS techniques, any land areas not feasible for large wind turbines were excluded, and the corresponding overall onshore technical potential ranges between 50 and 250 GW, depending on map and turbine model. Considering only economically feasible turbines (with capacity factors of 20%) and the median-based map, the final technical potential equals 17 GW when using the low-wind-speed model but is reduced to 5 GW with the conventional models, adequately meeting the national wind energy target of 3 GW by the year 2036. The results suggest a strong sensitivity of estimated technical potential to turbine technology and a suitability of low-wind-speed turbines for wind conditions in Thailand.     

Measuring bed shear stress along vegetated river beds using FST-hemispheres

The measurement of the bed shear stress along vegetated river beds is essential for accurately predicting the water level, velocity and solute and sediment transport fluxes in computational hydroenvironmental models. Details are given herein of an experimental and theoretical study to determine the bed boundary shear stress along vegetated river beds introducing a novel field measuring method, namely the FliessWasserStammtisch (FST)-hemispheres. Although investigations have been conducted previously for sedimentary channels using the FST-hemispheres, this preliminary study is thought to be the first time that such hemispheres have been used to investigate the bed shear stresses in vegetated channels. FST-hemispheres were first developed by Statzner and Müller [1989. Standard hemispheres as indicators of flow characteristics in lotic benthos research. Freshwater Biology 21, 445-459] to act as an integrated indicator of the gross hydrodynamic stresses present near the bed. Test and validation data were found to be at least of the same order of magnitude for the stresses predicted from literature for sedimentary channels, with this study establishing the commencement of a database of calibrated FST-hemisphere laboratory data for vegetated channel beds. In a series of experiments, depths ranging from 0.1 to 0.28m were considered, equating directly to comparable conditions in small rivers or streams. The results of this study provide a basis for enabling the FST-hemispheres to be used to evaluate the boundary shear stress for a wider range of applications in the future, including vegetated river beds.     

A novel blade design for Savonius wind turbine based on polynomial bezier curves for aerodynamic performance enhancement

ABSTRACT

Advanced wind turbine designs and technologies have been evolved to take advantage of wind energy. Despite the significant progress already attained, the need for a dependable wind energy converter particularly devoted to small-scale applications remains a challenging issue. Due to its design simplicity, Savonius wind turbine is the most suitable candidate for such applications. It operates at low wind speed, with the necessary starting capacity and insensitivity to wind directions. Moreover, in the literature related to wind energy, the Savonius rotor is known for its low performance compared to other types of wind turbines. In this paper, we present a study into the utilization of Bézier curves and transient computational fluid dynamics (CFD) to optimize the conventional Savonius blade design. The k-ω SST turbulence model is employed to perform a series of CFD simulations in order to assess the power coefficient of each generated design. A validation of optimization results using the Taguchi method was carried out. The comparative analysis of the torque and power coefficients shows a significant increase in the power coefficient (C_p). The optimal C_p is 0.35 and is 29% higher than the conventional Savoniu wind turbine (SWT). Subsequently, the effectiveness of the innovative geometry is proved by improved pressure and velocity distributions around blades of novel design.     

“It's easy to throw rocks at a corporation”: wind energy development and distributive justice in Canada

In places like Canada, fast-paced wind turbine development combined with policy that limits local decision-making power has resulted in strong opposition to specific projects. Some studies suggest that anti-wind sentiment is tied to inadequate financial benefits – especially sharing at the local level. Thus, ideas of distributive economic justice have received traction, particularly in the form of praise for community-based development models. This paper reports on the findings from a mixed-methods study concerning preferred distributive justice elements in rural communities in Ontario (technocratic-based model) and Nova Scotia (community-based model) living with turbines. Residents’ perceptions of economic benefits are nuanced, but unlike other studies, this empirical work shows that both the fair distribution and the amount of local benefits are important predictors of project support. Yet, concerns around the fair distribution of benefits dominate in a regression on the adequacy of those benefits. A variety of interview and survey findings further point to the strength of traditional, profit-sharing community-based models for distributing benefits, but also more novel ideas including lowered electricity bills and tax rebates in areas home to turbines.     

Numerical and experimental research on multi-stage pump as turbine system

Recently, researches on pump as turbine (PAT) have been one of the hot issues in fluid machineries. Of these hydraulic turbines, multi-stage PATs are widely used in industrial fields. However, most attentions have been paid on performance of the single-stage PATs and the turbines themselves. In this paper, a potential multi-stage PAT system with load pump was investigated numerically and experimentally. The match relations between PAT and load pump were explored by theory, and an analytical method to predict performance of PAT system was proposed in addition. Computational fluid dynamics method (CFD) was adopted to study the performance characteristics of PAT under a constant rotation or certain head. The operational rules of multi-stage PAT system were analyzed in both constant and variable speed that confirmed the prediction of system performance. The results could give guidance to choose a proper load pump and promote efficiency of PAT system.     

The impact of visual factors on noise annoyance among people living in the vicinity of wind turbines

Wind turbines are highly visible objects and the response to wind turbine noise is possibly influenced by visual factors. In this study, visibility of the noise source, visual attitude and vertical visual angle (VVA) in different landscapes were explored. Data from two cross-sectional field studies carried out among people living near wind turbines (n=1095) were used for structural equation modelling. A proposed model of the influence of visual attitude on noise annoyance, also comprising the influence of noise level and general attitude, was tested among respondents who could see vs. respondents who could not see wind turbines from their homes, living in flat vs. hilly/rocky terrain, and living in built-up vs. rural areas. Visual attitude towards the noise source was associated with noise annoyance to different degrees in different situations. A negative visual attitude, more than multi-modal effects between auditory and visual stimulation, enhanced the risk for noise annoyance and possibly also prevented psychophysiological restoration possibilities. Aesthetic evaluations of the noise source should be taken into account when exploring response to environmental noise.     

Minimizing Collision Risk Between Migrating Raptors and Marine Wind Farms: Development of a Spatial Planning Tool

An increased focus on renewable energy has led to the planning and construction of marine wind farms in Europe. Since several terrestrial studies indicate that raptors are especially susceptible to wind turbine related mortality, a Spatial Planning Tool is needed so that wind farms can be sited, in an optimal way, to minimize risk of collisions. Here we use measurements of body mass, wingspan and wing area of eight European raptor species, to calculate their Best Glide Ratio (BGR). The BGR was used to construct a linear equation, which, by the use of initial take-off altitude, could be used to calculate a Theoretical Maximum Distance (TMD) from the coast, attained by these soaring-gliding raptor species. If the nearest turbine, of future marine wind farms, is placed farther away from the coast than the estimated TMD, the collision risk between the turbine blades and these gliding raptors will be minimized. The tool was demonstrated in a case study at the Rødsand II wind farm in Denmark. Data on raptor migration altitude were gathered by radar. From the TMD attained by registered soaring-gliding raptors in the area, we concluded that the Rødsand II wind farm is not sited ideally, from an ornithological point of view, as potentially all three registered species are at risk of gliding through the area swept by the turbine rotor blades, and thereby at risk of colliding with the wind turbines.     

A NEW CHALLENGE FOR WESTERN WATER SUPPLIES1

ABSTRACT: In many of the limited water resource areas of the western United States most water supplies have been put to beneficial uses. Energy, a fast expanding high-priority water use, is making challenging demands for these limited supplies. Can water supplies be stretched, supplemented, or redirected so that present uses can be maintained and energy water needs satisfied? The Bureau of Reclamation is investigating innovative methods of water management, reregulation, and use to meet these demands. Related programs under study include potentials for: development of additional hydroelectric power, installation of low-head turbines in western water courses, utilization of pumped storage and underground storage, use of geo-thermal heat, extension of water supplies through more efficient irrigation systems and practices, and weather modification.     

Investigations on Blade Tip Tilting for Hawt Rotor Blades Using CFD

The main purpose of this paper is to study the aerodynamic effects of blade tip tilting on power production of horizontal-axis wind turbines by using Computational Fluid Dynamics (CFD). For validation and as a baseline rotor, the NREL Phase VI wind turbine rotor blade is used. The Reynolds-Averaged Navier–Stokes Equations are solved and different turbulence models including the Spalart–Allmaras, Standard k-?, k-? Yang–Shih and SST k–ω models are used and tested. The results are shown in terms of power generation at different wind speeds and the pressure distribution at different sections of the blade, and the comparisons are made with the available experimental data. For tip tilting analysis, 16 different geometries belonging to four different configurations are studied. The geometries are generated based on changing the twist and the cant angles of the winglet. The four different configurations are obtained from tilting the blade tip toward pressure side, suction side, leading edge, and trailing edge. The effect of the different configurations on the flow characteristics and hence on the power production of the wind turbine is investigated.     

Fish mercury increase in Lago Manso, a new hydroelectric reservoir in tropical Brazil

It has been frequently demonstrated that mercury (Hg) concentrations in fish rise in newly constructed hydroelectric reservoirs in the Northern Hemisphere. In the present work, we studied whether similar effects take place also in a tropical upland reservoir during impoundment and discuss possible causes and implications. Total Hg concentrations in fish and several soil and water parameters were determined before and after flooding at Rio Manso hydroelectric power plant in western Brazil. The Hg concentrations in soil and sediment were within the background levels in the region (22-35 ng g(-1) dry weight). There was a strong positive correlation between Hg and carbon and sulphur in sediment. Predatory fish had total Hg concentrations ranging between 70 and 210 ng g(-1) f.w. 7 years before flooding and between 72 and 755 ng g(-1) f.w. during flooding, but increased to between 216 and 938 ng g(-1) f.w. in the piscivorous and carnivorous species Pseudoplatystoma fasciatum, cachara, and Salminus brasiliensis, dourado, 3 years after flooding. At the same time, concentrations of organic carbon in the water increased and oxygen concentrations decreased, indicating increased decomposition and anoxia as contributing to the increased Hg concentrations in fish. The present fish Hg concentrations in commonly consumed piscivorous species are a threat to the health of the population dependent on fishing in the dam and downstream river for sustenance. Mercury exposure can be reduced by following fish consumption recommendations until fish Hg concentrations decrease to a safe level.     

A numerical investigation of fluid-structure coupling of 3 MW wind turbine blades

In this paper, computational modeling is created for 3 MW wind turbine blade using the software Solidworks, and the computations are carried out using Workbench for the fluid–structure interaction of blades due to both the rated and the extreme wind load. The methods developed are applied to the simulation of the NREL Phase VI wind turbine blades, and validation against published data is presented. Moreover, the static structural analysis for wind turbine rotor is performed using Mechanical APDL. The results show that the maximum values of stress reach 458 MPa and 76.9 MPa due to the rated and extreme wind load, respectively, which are lower than 78.3 MPa, the flexural strength of Swancor 2511-A epoxy resin for blade material.     

Modeling of power plant impacts on fish populations

A simulation model was developed for assessing the effects of power plant impacts on fish populations. The model was based on biomass changes in a fish population that divided into 4 life stages: eggs, larvae, juveniles, and adults. Metabolism of fish was included in the model as assimilation and respiration with the effects of temperature push-pull regulation. A cohort technique was used for life stage transfers in the young stages. Compensation was included in terms of density-dependent mortality of the young fish. Power plant impacts on a fish population included entrainment (eggs and larvae) and impingement (juveniles and adults).The model was applied to the gizzard shad (Dorosoma cepedianum) population in Pool 14 of the Mississippi River in Illinois and lowa. The nearby nuclear power plant, the Quad-Cities Station, is located on the Illinois side. The simulation of the model with the 1976 field data estimates of the power plant entrainment and impingement predicted a 10 percent potential reduction of the population over 30 years. The simulated reduction of the population with the effects of different river flows showed that the result with the 1976 river flow data gave 1.5 times higher reduction than the results with data of other plant operation years, 1972 through 1975. Because the 1976 data recorded low river flow, the 10 percent reduction quoted above may be high.     

TIDAL POWER GENERATION UTILIZING ATMOSPHERIC PRESSURE OR AIR RECIRCULATION1

ABSTRACT: This paper presents research conducted on tidal power generation utilizig atmospheric pressure or air recirculation. The proposed methods in this paper differ from conventional methods. That is, they require simple and relatively inexpensive power generating facilities that would convert the potential energy of the tides into kine tic energy of air for driving the air turbines in a power plant. The characteristics of the new methods are as follows: (1) in tidal power generation utilizing the atmospheric pressure, the air pressure exerted on an air turbine can be maintained at 1 atm regardless of the water head; (2) in tidal power generation utilizing the air recirculation, the air pressure exerted on an air turbine can be made twice as high as the available water head; (3) higher tidal energy conversion efficiency can be obtained by flowing larger quantities of water in a shorter time period; (4) the generating turbines can be located at a convenient place remote from the reservoir; and (5) equipment corrosion due to salt is minimized.     

Performance evaluation of a horizontal axis wind turbine in operation

The operation of modern horizontal axis wind turbine (HAWT) includes a number of important factors, such as wind power (P), power coefficient (C_P), axial flow induction factor (a), rotational speed (Ω), tip speed ratio (λ), and thrust force (T). The aerodynamic qualities of these aspects are evaluated and discussed in this study. For this aim, the measured data are obtained from the Sebenoba Wind Energy Power Plant (WEPP) that is located in the Sebenoba region in Hatay, Turkey, and a wind turbine with a capacity of 2 MW is selected for evaluation. According to the results obtained, the maximum turbine power output, maximum power coefficient, maximum axial flow induction factor, maximum thrust force, optimum rotational speed, probability density of optimum rotational speed, and optimum tip speed ratio are found to be 2 MW, 30%, 0.091, 140 kN, 16.11 rpm, 46.76%, and 7, respectively. This study has revealed that wind turbines must work under optimum conditions in order to extract as much energy as possible for approaching the ideal limit.     

Application of the target fish community model to an urban river system

Several models have been developed to assess the biological integrity of aquatic systems using fish community data. One of these, the target fish community (TFC) model, has been used primarily to assess the biological integrity of larger, mainstem rivers in southern New England with basins characterized by dispersed human activities. We tested the efficacy of the TFC approach to specify the fish community in the highly urbanized Charles River watershed in eastern Massachusetts. To create a TFC for the Charles River we assembled a list of fish species that historically inhabited the Charles River watershed, identified geomorphically and zoogeographically similar reference rivers regarded as being in high quality condition, amassed fish survey data for the reference rivers, and extracted from the collections the information needed to define a TFC. We used a similarity measurement method to assess the extent to which the study river community complies with the TFC and an inference approach to summarize the manner in which the existing fish community differed from target conditions. The five most abundant species in the TFC were common shiners (34%), fallfish (17%) redbreast sunfish (11%), white suckers (8%), and American eel (7%). Three of the five species predicted to be most abundant in the TFC were scarce or absent in the existing river community. Further, the river was dominated by macrohabitat generalists (99%) while the TFC was predicted to contain 19% fluvial specialist species, 43% fluvial dependent species, and 38% macrohabitat generalist species. In addition, while the target community was dominated by fish intolerant (37%) and moderately tolerant (39%) of water quality degradation, the existing community was dominated by tolerant individuals (59%) and lacked intolerant species expected in the TFC. Similarity scores for species, habitat use specialization, and water quality degradation tolerance categories were 28%, 35% and 66%, respectively. The clear pattern of deviations from target conditions when observing fish habitat requirements strongly suggests that physical habitat change should be a priority for river enhancement in the Charles River. Comparison of our target and existing fish communities to those from a comprehensive study of Northeastern fish assemblage responses to urban intensity gradients revealed very similar results. Likewise, comparison of our TFC community and affinity scores to those of other TFCs from similar regions also yielded similar results and encouraging findings. Based on the positive results of these comparisons, the utility of the findings from the inference approach, and the widespread adoption of the TFC in the Northeast US, it appears that the TFC approach can be used effectively to identify the composition of a healthy fish community and guide river enhancements in both highly urbanized and non-urbanized streams and rivers in the Northeast US.     

Short-term wind speed forecasting: Application of linear and non-linear time series models

This study forecasts day-ahead wind speed at 15 minute intervals at the site of a wind turbine located in Maharashtra, India. Wind speed exhibits non-stationarity, seasonality and time-varying volatility clustering. Univariate linear and non-linear time series techniques namely MSARIMA, MSARIMA-GARCH and MSARIMA-EGARCH have been employed for forecasting wind speed using data span ranging from 3 days to 15 days. Study suggests that mean absolute percentage error (MAPE) values first decrease with the increase in data span, reaches its minima and then start increasing. All models provide superior forecasting performances with 5 days data span. It is further evident that ARIMA-GARCH model generates lowest MAPE with 5 days data span. All these models provide superior forecasts with respect to current industry practices. This study establishes that employing various linear and non-linear time series techniques for forecasting day-ahead wind speed can benefit the industry in terms of better operational management of wind turbines and better integration of wind energy into the power system, which have huge financial implications for wind power generators in India.     

A method to create simplified versions of existing habitat suitability index (HSI) models

The habitat evaluation procedures (HEP), developed by the US Fish and Wildlife Service, are widely used in the United States to determine the impacts of major construction projects on fish and wildlife habitats. HEP relies heavily on habitat suitability index (HSI) models that use measurements of important habitat characteristics to rate habitat quality for a species on a scale of 0 (unsuitable) to 1.0 (optimal). This report describes a method to simplify existing HSI models to reduce the time and expense involved in sampling habitat variables. Simplified models for three species produced HSI values within 0.2 of those predicted by the original models 90% of the time. Simplified models are particularly useful for rapid habitat inventories and evaluations, wildlife management, and impact assessments in extensive areas or with limited time and personnel.     

SMALL FISH MODELS FOR IDENTIFYING CARCINOGENS IN THE AQUEOUS ENVIRONMENT1

ABSTRACT: Contaminants in water and sediments can be carcinogenic to aquatic wildlife as well as humans. Identifying those carcinogens, however, is difficult because they often occur in low concentrations and exert their effects over a large part of the life span of affected organisms. Furthermore, the carcinogens are often components of complex mixtures. Recent studies suggest that laboratory-reared fish species might be well suited for testing water-associated and other carcinogens. Here, we review the principal carcinogen exposure methods that utilize small fish species or can be adapted to utilize small fish species to detect carcinogens in aqueous environments. Emphasis is placed on methods for which the end-point is tumor induction. The methods discussed are dietary exposures, skin painting, embryo microinjection, early life stage (pulse) exposures, static water exposures, flow-through exposures, and controlled field exposures. Early life stage exposures seem to have the greatest utility with regard to carcinogen sensitivity, ease of administration, disposal of test compounds, and economy of materials and effort. For certain types of carcinogens, however, long-term flow-through exposures are probably required. In summary, small fish carcinogenesis models offer an array of methodologies that can be utilized in a variety of combinations depending on compounds tested, exposure parameters employed, and end points sought.