Energy recovery from municipal solid waste in Nigeria and its economic and environmental implications

An assessment of potential biomass resources in Nigeria for the production of methane and power generation is presented in this paper. Nigeria, as an underdeveloped and populous country, needs an uninterrupted source of energy. The country's energy problems have crippled large sectors of the economy. The percentage of people connected to the national grid is 40%. These 40% experience electricity supply failure on average 10–12 hours daily. Energy generation from municipal solid waste (MSW) is an effective MSW management strategy. Yearly waste generation has increased from 6,471 gigagrams (Gg) in 1959 to 26,600 Gg in 2015. This amount is projected to reach 36,250 Gg per year by 2030. Methane emission for 2015 was 491 Gg, and it is projected to reach 669 Gg in 2030. These values translate to 3.48 × 10⁹ kilowatt hours (kWh) of electricity for 2015, with a projected 4.74 × 10⁹ kWh by 2030. The revenue to be derived from the electricity that is generated could have been US$365.04 × 10⁶ for 2015, and it is estimated that it will reach US$473.82 × 10⁶ by 2030. It was found that methane emissions from MSW increased with time, and capturing this gas for energy production will lead to a sustainable waste management.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Potential energy production from organic waste and its environmental and economic impacts at a tertiary institution in Palestine

Municipal solid waste (MSW) is one of the most well-known biomass resources that can be utilized to produce renewable energy. Numerous countries are plagued by the proliferation of waste, particularly organic waste that can be utilized for energy recovery. Palestine suffers from inefficient solid waste management, and only recently have a few projects focused on bioenergy production been implemented. Throughout the years, the city of Tulkarm experiences power outages which cause a challenge to the Palestine Technical University-Kadoorie campus in Tulkarm. Thus, the possibility of energy recovery from the organic portion in Palestine Technical University-Kadoorie was evaluated. The analysis of an economic impact included discussions of a number of economic aspects, including Levelized cost of energy, internal rate of return, present worth, annual worth, and payback period. On the other hand, a carbon dioxide savings analysis and gas emission were evaluated. The outcomes of the energy optimization demonstrated that the suggested system could supply the institution with an average of roughly 7 MWh of electrical energy. According to the economic study, this project offers 0.25 million dollars in present value, 0.144 million dollars in annual value, a 13 percent internal rate of return, a payback period of 6 years, and a levelized cost of energy of 0.11 dollars for each kWh generated. Additionally, the environmental assessment revealed that this system might reduce CO₂ emissions by around 8,343,778 tons. For effective waste management, energy recovery, and emission reduction, it is advised to implement anaerobic digestion technology.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

Municipal solid waste management in China: Status,problems and challenges

This paper presents an examination of MSW generation and composition in China, providing an overview of the current state of MSW management, an analysis of existing problems in MSW collection, separation, recycling and disposal, and some suggestions for improving MSW systems in the future. In China, along with urbanization, population growth and industrialization, the quantity of municipal solid waste (MSW) generation has been increasing rapidly. The total MSW amount increased from 31.3 million tonnes in 1980 to 212 million tonnes in 2006, and the waste generation rate increased from 0.50 kg/capita/day in 1980 to 0.98 kg/capita/year in 2006. Currently, waste composition in China is dominated by a high organic and moisture content, since the concentration of kitchen waste in urban solid waste makes up the highest proportion (at approximately 60%) of the waste stream. The total amount of MSW collected and transported was 148 million tonnes in 2006, of which 91.4% was landfilled, 6.4% was incinerated and 2.2% was composted. The overall MSW treatment rate in China was approximately 62% in 2007. In 2007, there were 460 facilities, including 366 landfill sites, 17 composing plants, and 66 incineration plants. This paper also considers the challenges faced and opportunities for MSW management in China, and a number of recommendations are made aimed at improving the MSW management system.     

Alternative treatments for the municipal solid waste and domestic sewage in Campinas,Brazil

The treatments of municipal solid waste (MSW) and the domestic sewage (DS) are critical issues of the current political and environment discussions. These concerns are due to the lack of dumping areas, the continuous increase of the population, and public health issues. The adequate treatment and management of MSW and DS can produce many benefits such as financial funds, heat and energy production, reduction of emissions and recuperation of water for reuse. Currently in Campinas MSW and DS are deposited in landfills or discharged into rivers and other sites. In the present study two scenarios are evaluated for the treatment of MSW and DS in Campinas: recycling with biological treatment and recycling with thermal treatment. The most suitable treatments for Campinas, based on the data from the present analysis and taking into consideration the local conditions, maximization of energy potential and environmental benefits, are incineration for the MSW and biological treatment for DS, both with energy recuperation. The main gains of this option are substantial environmental benefits, generated energy which can reach 18% of the total electrical energy consumed in Campinas while about 53% recuperation of the total amount of water treated for Campinas in 2010.     

Resource consumption of pharmaceutical waste solvent valorization alternatives

In this article, for the treatment of two specific pharmaceutical waste solvents the resource consumption of an on-site distillation process is evaluated and compared with an off-site incineration process. Both techniques are evaluated based on a thermodynamic quantitative method. The exergy approach and the cumulative exergy extracted from the natural environment (CEENE) are envisaged in order to evaluate the overall resource intake at different levels. Scenarios are constructed to make a fair comparison of both techniques. Two waste solvents, toluene (TOL) and dichloromethane (DCM), from the pharmaceutical industry which are frequently sent to distillation were evaluated. The functional unit for the comparison of both treatment alternatives is the treatment of 1 kg waste solvent + the incineration of W kg low calorific hazardous waste + the delivery of X kg “recovered” solvent + the production of Y MJ heat and Z MJ electricity. W, X, Y and Z depend on the waste solvent properties. In terms of resource requirements, distillation requires 17% (TOL) and 66% (DCM) less resources than incineration. It can be concluded that the waste solvent properties, the efficiency of the distillation process and the efficiency of the fresh solvent production process are of major importance on the resource consumption and the final choice between incineration and distillation. For a full environmental impact analysis of both treatment options, also the emissions should be taken into account. It also has to be stressed that in practice, only solvents go to incineration which cannot be distilled due to the type and degree of pollution/composition of the solvent. If distillation is not feasible, then such solvents are sent to incineration with energy recovery, according to the EU directive 2006/12/EG.     

Physico-chemical characterization of Residual Household Waste for energy recovery in insular territories: Case study of Reunion Island

Waste-to-energy is a promising approach to face the current challenge of waste overproduction in Reunion Island, a French territory. In this particular context of an isolated and tropical territory, it is essential to study the properties of potential feedstocks to choose the most appropriate conversion process. This article reports on the composition of Residual Household Waste from Reunion Island and its physico-chemical parameters. Twelve representative samples of Residual Household Waste were subjected to thermal and elemental analysis. The results showed that their composition had a significant influence on the physico-chemical properties, including calorific value. Residual Household Waste from the selective sorting (rich in wood, plastic, and sanitary textiles) as well as dry mixed RHW are the most interesting for energy recovery. Due to their high volatile matter and high carbon content, and their low moisture content, these types of waste have a high calorific value exceeding 18 MJ/kg. Furthermore, the RHW sample comply with the environmental and health criteria applied by French regulations concerning halogen and heavy metal. Thus, it seems that Residual Household Waste can be an alternative to conventional fuels used in incineration or pyro-gasification processes. However, the study also points the need for a pre-treatment process for these wastes. Indeed, it is necessary to sort them correctly in order to avoid the risks of pollution and important maintenance. And more importantly, drying beforehand is unavoidable to improve combustibility and obtain optimal energy conversion.     

Municipal solid waste management in South Africa: from waste to energy recovery through waste-to-energy technologies in Johannesburg

ABSTRACT

“Waste-to-energy” (WTE) technologies have been presented as one of the avenues to improve the management of solid waste whilst promoting clean and healthy urban environments through the recovery of waste and generation of energy. Research suggests that with the right investment in technologies and institutional changes, waste can potentially become a resource that can contribute to the socio-economic development of cities. It is in this context that this paper presents a review of the literature on WTE technologies and their implications on sustainable waste management in urban areas. The paper particularly contributes to our understanding of WTE technologies and its potential on Municipal Solid Waste Management (MSWM) in Johannesburg, South Africa. It is estimated that the city of Johannesburg’s landfills airspace will be completely depleted by year 2023. This projection becomes a motivation for the identification of suitable WTE alternative avenues to manage waste in the city. The paper argues that WTE technologies can contribute significantly to sustainable waste management, economic growth, ecological and environmental well-being.     

Global disposal strategies for waste cathode ray tubes

The collection and management of waste electrical and electronic appliances around the world, and the possible negative environmental consequences have been an issue of current debate. Cathode ray tubes (CRTs) used as display screen for computer monitors and televisions contains large quantities of lead, estimated at between 0.5 and 4 kg, depending on the size of the CRT and has been identified as the most polluting of all electronic waste components. Having failed the tests used in the toxicity characterization of solid wastes, CRTs have been declared ‘hazardous’ and subsequently banned from landfills and incinerators in most developed countries. Presently, large quantities of CRTs are generated globally with only few developed countries having effective take back and sound management program. Meanwhile, large quantities of CRT-containing devices are being moved across frontiers into developing countries in the name of ‘reuse’ and ‘bridging the digital divide’. With near absence of recycling infrastructure for electronic wastes in most developing countries, waste CRTs are disposed of with MSW at open dumps and unsanitary landfills. This paper reviews the current practices in the management of CRTs around the world, with emphasis on the role of regulations, availability of recycling infrastructure, recycling/reuse routes, and export into developing countries. Inappropriate disposal of waste CRTs creates the opportunity for large-scale environmental contamination with heavy metals, especially lead. Appropriate disposal routes are required globally in the management of CRTs in order to mitigate environmental contamination and human exposure to toxins.     

The effects of leachate recirculation with supplemental water addition on methane production and waste decomposition in a simulated tropical landfill

In order to increase methane production efficiency, leachate recirculation is applied in landfills to increase moisture content and circulate organic matter back into the landfill cell. In the case of tropical landfills, where high temperature and evaporation occurs, leachate recirculation may not be enough to maintain the moisture content, therefore supplemental water addition into the cell is an option that could help stabilize moisture levels as well as stimulate biological activity. The objectives of this study were to determine the effects of leachate recirculation and supplemental water addition on municipal solid waste decomposition and methane production in three anaerobic digestion reactors. Anaerobic digestion with leachate recirculation and supplemental water addition showed the highest performance in terms of cumulative methane production and the stabilization period time required. It produced an accumulated methane production of 54.87 l/kg dry weight of MSW at an average rate of 0.58 l/kg dry weight/d and reached the stabilization phase on day 180. The leachate recirculation reactor provided 17.04 l/kg dry weight at a rate of 0.14l/kg dry weight/d and reached the stabilization phase on day 290. The control reactor provided 9.02 l/kg dry weight at a rate of 0.10 l/kg dry weight/d, and reached the stabilization phase on day 270. Increasing the organic loading rate (OLR) after the waste had reached the stabilization phase made it possible to increase the methane content of the gas, the methane production rate, and the COD removal. Comparison of the reactors' efficiencies at maximum OLR (5 kgCOD/m(3)/d) in terms of the methane production rate showed that the reactor using leachate recirculation with supplemental water addition still gave the highest performance (1.56 l/kg dry weight/d), whereas the leachate recirculation reactor and the control reactor provided 0.69 l/kg dry weight/d and 0.43 l/kg dry weight/d, respectively. However, when considering methane composition (average 63.09%) and COD removal (average 90.60%), slight differences were found among these three reactors.     

Survey of household waste composition and quantities in Abuja,Nigeria

Inadequate management of household solid waste is a serious problem in many developing cities. The study aimed to evaluate the quantities and composition of household solid waste generation in Abuja within different socioeconomic groups. The wastes from 74 households across different socioeconomic levels in Abuja were collected, weighted and classified on a daily basis for seven days in February 2012. The result showed that the average daily per capita household waste generation is 0.634 kg/capita/day. The characteristic of solid waste in Abuja are typical for the developing cities and dominated by organic waste. Households waste consisted of 63.6% organic waste, 9.7% paper, 8.7% plastics, 3.2% metal, 2.6% glass, 1.6% textile and 10.6% others (unclassified) and the bulk density was 240 kg/m³. The evaluation of relationship between income and daily per capita household waste generation showed a positive relationship. The study revealed a statistically significant difference between household size and daily per capita household waste generation in high-income group; a slight significant difference between household size and daily per capita household waste generation in medium income group and no statistically significant difference between household size and daily per capita household waste generation in low-income group.     

Life cycle assessment of clinker production using refuse‐derived fuel: A case study using refuse‐derived fuel from Tehran municipal solid waste

One of the techniques used to dispose of 4,000 tons per day (TPD) of non‐recyclable waste from Tehran is to burn it as an alternative fuel in cement kilns. This practice reduces emissions from landfills, prevents the loss of waste energy, and conserves fossil fuel resources. The aim of our study was to conduct a life cycle assessment (LCA) of clinker production in cement kilns using a combination of natural gas, mazut, a form of heavy, low‐quality fuel oil, and refuse‐derived fuel (RDF) from Tehran. We used SimaPro 7.1 software to perform an LCA of 1 kilogram (kg) of clinker produced using the following fuel combinations: the first scenario involved natural gas consumption alone, the second scenario involved a combination of natural gas and mazut, with the mazut providing 5% to 30% of the heating value needed to produce cement clinker in the kiln, and the third scenario involved a combination of natural gas and RDF (providing 5% to 30% of the heating needed in the kiln). The impact categories in the LCA of global warming, eutrophication, and acidification were assessed by the Center of Environmental Science of Leiden University (Centrum voor Milieukunde Leiden—CML) CML 2000 method. The results indicated that the third scenario, involving natural gas and RDF, reduced acidification by 2.14–11.5% and global warming by 0–1.3% relative to the first scenario involving the use of only natural gas. In addition, we observed a 0.65–3.81% reduction in acidification and a 0.9–3.8% reduction in global warming under the third scenario compared with the second scenario (co‐firing of natural gas and mazut). The amount of nitrogen oxides (NO_X) emitted from the combustion of the Tehran RDF was greater than that was emitted when burning mazut. Therefore, reduction of nitrogen from the RDF composition is necessary. This study indicates that the use of Tehran RDF (with reduced nitrogen) in Tehran cement kilns does not increase cement kiln NO_X, sulfur dioxide (SO₂), and carbon dioxide (CO₂) emissions; however, we need to conduct additional investigation into the chemical composition of the Tehran waste before using solid waste in place of fossil fuels.     

A two-stage support-vector-regression optimization model for municipal solid waste management - a case study of Beijing, China

In this study, a two-stage support-vector-regression optimization model (TSOM) is developed for the planning of municipal solid waste (MSW) management in the urban districts of Beijing, China. It represents a new effort to enhance the analysis accuracy in optimizing the MSW management system through coupling the support-vector-regression (SVR) model with an interval-parameter mixed integer linear programming (IMILP). The developed TSOM can not only predict the city's future waste generation amount, but also reflect dynamic, interactive, and uncertain characteristics of the MSW management system. Four kernel functions such as linear kernel, polynomial kernel, radial basis function, and multi-layer perception kernel are chosen based on three quantitative simulation performance criteria [i.e. prediction accuracy (PA), fitting accuracy (FA) and over all accuracy (OA)]. The SVR with polynomial kernel has accurate prediction performance for MSW generation rate, with all of the three quantitative simulation performance criteria being over 96%. Two cases are considered based on different waste management policies. The results are valuable for supporting the adjustment of the existing waste-allocation patterns to raise the city's waste diversion rate, as well as the capacity planning of waste management system to satisfy the city's increasing waste treatment/disposal demands.     

Medical waste management in Korea

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulatory agencies and waste generators to better manage the waste from healthcare facilities. This paper presents an overview of the current management practices of medical waste in Korea. Information regarding generation, composition, segregation, transportation, and disposal of medical wastes is provided and discussed. Medical waste incineration is identified as the most preferred disposal method and will be the only available treatment option in late 2005. Faced with increased regulations over toxic air emissions (e.g. dioxins and furans), all existing small incineration facilities that do not have air pollution control devices will cease operation in the next few years. Large-scale medical waste incinerators would be responsible for the treatment of medical waste generated by most healthcare facilities in Korea. It is important to point out that there is a great potential to emit air toxic pollutants from such incinerators if improperly operated and managed, because medical waste typically contains a variety of plastic materials such as polyvinyl chloride (PVC). Waste minimization and recycling, control of toxic air emissions at medical waste incinerators, and alternative treatment methods to incineration are regarded to be the major challenges in the future.     

Does municipal solid waste composting make economic sense?

Currently there is widespread interest on the part of local Governments in incorporating municipal solid waste (MSW) composting into their integrated solid waste management systems. However, there is little information on the costs of MSW composting and how those costs compare with the costs of alternative forms of waste disposal (especially traditional land disposal). This article begins to fill this information gap by reporting the results of a survey of 19 MSW composting facilities around the United States. Results indicate that MSW composting generally costs around $50 per ton, and that very few facilities receive any revenues from the sale of compost to offset operating costs. Additional economic analysis indicates that, at present, MSW composting cannot be justified on financial grounds in most parts of the US, but may be competitive with land disposal where the cost of landfilling is high (such as the north-east).1998 Academic Press     

A preliminary study on solid waste generation at Har Ki Pauri,Haridwar, around the Ardh-Kumbh period of sacred bathing in the river Ganga in 2004

The amount of solid waste in the vicinity of the river Ganga increased rapidly during the festive days of Ardh-Kumbh. The initial amount of solid waste was 775.0 kg, observed on 30th January 2004 in the Har Ki Pauri area, which increased to 4,550.0 kg on the main bathing day of 4th May 2004, showing nearly a six-fold increase. The total amount of solid waste collected during nine days of observations was 23,865.0 kg. The rate of solid waste generation fell sharply during the following week, after the main bathing day, and was found to be 1,155.0 kg, which is still about 14.90% higher than the initial value.     

Seasonal variation of municipal solid waste generation and composition in four East European cities

The quality of recyclable and residual municipal solid waste (MSW) is, among other factors, strongly influenced by the seasonal variation in MSW composition. However, a relatively marginal amount of published data on seasonal MSW composition especially in East European countries do not provide sufficient information on this phenomenon. This study provides results from municipal waste composition research campaigns conducted during the period of 2009–2011 in four cities of Eastern European countries (Lithuania, Russia, Ukraine and Georgia). The median monthly MSW generation values ranged from 18.70 in Kutaisi (Georgia) to 38.31 kg capita⁻¹ month⁻¹ in Kaunas (Lithuania). The quantitative estimation of seasonal variation was performed by fitting the collected data to time series forecasting models, such as non-parametric seasonal exponential smoothing, Winters additive, and Winters multiplicative methods.     

Techno-economic analysis and environmental impact assessment of energy recovery from Municipal Solid Waste (MSW) in Brazil

Due to the lack of appropriate policies in the last decades, 60% of Brazilian cities still dump their waste in non-regulated landfills (the remaining ones dump their trash in regulated landfills), which represent a serious environmental and social problem. The key objective of this study is to compare, from a techno-economic and environmental point of view, different alternatives to the energy recovery from the Municipal Solid Waste (MSW) generated in Brazilian cities. The environmental analysis was carried out using current data collected in Betim, a 450,000 inhabitants city that currently produces 200 tonnes of MSW/day. Four scenarios were designed, whose environmental behaviour were studied applying the Life Cycle Assessment (LCA) methodology, in accordance with the ISO 14040 and ISO 14044 standards. The results show the landfill systems as the worst waste management option and that a significant environmental savings is achieved when a wasted energy recovery is done. The best option, which presented the best performance based on considered indicators, is the direct combustion of waste as fuel for electricity generation. The study also includes a techno-economical evaluation of the options, using a developed computer simulation tool. The economic indicators of an MSW energy recovery project were calculated. The selected methodology allows to calculate the energy content of the MSW and the CH₄ generated by the landfill, the costs and incomes associated with the energy recovery, the sales of electricity and carbon credits from the Clean Development Mechanism (CDM). The studies were based on urban centres of 100,000, 500,000 and 1,000,000 inhabitants, using the MSW characteristics of the metropolitan region of Belo Horizonte. Two alternatives to recovering waste energy were analyzed: a landfill that used landfill biogas to generate electricity through generator modules and a Waste-to-Energy (WtE) facility also with electricity generation. The results show that power generation projects using landfill biogas in Brazil strongly depend on the existence of a market for emissions reduction credits. The WtE plant projects, due to its high installation, Operation and Maintenance (O&M) costs, are highly dependent on MSW treatment fees. And they still rely on an increase of three times the city taxes to become attractive.     

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.