Towards the estimation of demand for recycling in Chile: The case of Santiago

In developing countries, the recycling of municipal solid waste (MSW) as an alternative to the traditional MSW management requires an economic sustainability valuation. From this perspective, the estimation of demand for recycling is crucial. In this paper, we study the case of recycling MSW in Santiago, Chile. We estimate the relation between the monthly amount of MSW separated voluntarily from apartments located in Santiago and the monthly price required to participate in a municipal recycling program. We consider the transference of the municipal cost savings to the owners of the apartments due to the amount of MSW separated for recycling, which is not collected and deposited in the current MSW system. For the estimation, we use concepts from environmental economics and psychology, analyzing the operation and municipal costs incurred by current MSW management and designing and applying a survey based on a contingent valuation method (CVM) approach. The results indicate that the percentage of MSW separated for recycling varies between a 27.98% and 33.18%, that only four MSW types are affected by a variation of the monthly price, and that a reduction of monthly collection trips in the current MSW system from 24 to 18 can be obtained. Additionally, we discuss a number of methodological aspects to be considered in a similar study of valuation of recycling in developing countries. Our conclusion is that Santiago has favorable conditions for the implementation of a recycling program as an alternative to the current MSW system.     

The influence of collection facility attributes on household collection rates of electronic waste: The case of televisions and computer monitors

In the US, household electronic waste collected for recycling is primarily by voluntary drop-off at designated collection facilities. This study examines the influence of specific collection facility attributes (recycling fees charged, number of days open, and driving distance) on the household collection rate of e-waste in the US state of Maine. Data were collected for household computer monitor and television collection for 92 municipal waste transfer facilities representing 30% of the state's population for one year. Results suggest that recycling fees are negatively correlated with the number of televisions and computer monitors collected; furthermore, the more frequently facilities were open, the more televisions and computer monitors were collected per capita. The distance from the facility had no correlation, which prompted an analysis of whether the existence of a curbside collection system in the municipality was influential. Results show a negative correlation between computer monitor and television collection and a municipality having recycling (but not e-waste) curbside collection. Based on the results of this study, policymakers may be able to increase the collection rate of household e-waste by eliminating or lowering recycling fees, expanding collection days and hours to increase convenience, and/or considering curbside collection of e-waste.     

Life cycle inventory of recycling portable nickel–cadmium batteries

In this study, the environmental impact of recycling portable nickel–cadmium (NiCd) batteries in Sweden is evaluated. A life cycle assessment approach was used to identify life cycle activities with significant impact, the influence of different recycling rates and different time boundaries for emissions of landfilled metals. Excluding the user phase of the battery, 65% of the primary energy is used in the manufacture of batteries while 32% is used in the production of raw materials. Metal emissions from batteries to water originate (96–98%) from landfilling and incineration. The transportation distance for the collection of batteries has no significant influence on energy use and emissions. Batteries manufactured with recycled nickel and cadmium instead of virgin metals have 16% lower primary energy use. Recycled cadmium and nickel metal require 46 and 75% less primary energy, respectively, compared with extraction and refining of virgin metal. Considering an infinite time perspective, the potential metal emissions are 300–400 times greater than during the initial 100 years. From an environmental perspective, the optimum recycling rate for NiCd batteries tends to be close to 100%. It may be difficult to introduce effective incitements to increase the battery collection rate. Cadmium should be used in products that are likely to be collected at the end of their life, otherwise collection and subsequent safe storage in concentrated form seems to offer the best solution to avoid dissipative losses.     

Why recycle? A comparison of recycling motivations in four communities

Four Illinois communities with different sociode-mographic compositions and at various stages of planning for solid waste management were surveyed to determine the influence of sociodemographic variables and planning stages on the factors that motivate recycling behavior. A factor analysis of importance ratings of reasons for recycling and for not recycling yielded five factors interpreted as altruism, personal inconvenience, social influences, economic incentives, and household storage. The four communities were shown to be significantly different in multivariate analyses of the five motivational factors. However, attempts to explain these community differences with regression analyses, which predicted the motivational factors with dummy codes for planning stages, a measure of self-reported recycling behavior, and sociodemographic measures were unsatisfactory. Contrary to expectation, the solid waste management planning stages of the cities (curbside pickup, recycling dropoff center, and planning in progress) contributed only very slightly to the prediction of motivational factors for recycling. Community differences were better explained by different underlying motivational structures among the four communities. Altruistic reasons for recycling (e.g., conserving resources) composed the only factor which was similar across the four communities. This factor was also perceived to be the most important reason for recycling by respondents from all four communities. The results of the study supported the notion that convenient, voluntary recycling programs that rely on environmental concern and conscience for motivation are useful approaches to reducing waste.     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Two Measured Parameters Correlated to Participation Rates in Curbside Recycling Schemes in the UK

Local authorities in the United Kingdom are currently changing their approach towards recycling as they attempt to meet legislative targets. An important part of this drive is the provision of an effective curbside recycling service and it is vital to understand the parameters that influence the performance of the system offered. In this article, three primary datasets, collected from over 1400 households each, are examined for parameters correlated to participation rates. Two measured parameters were found that are not commonly identified in previous studies of curbside recycling schemes, and they are shown to merit further investigation as useful tools for planning purposes. One is the number of types of material collected; participation rates are greater for schemes collecting more materials. The second is the number of households situated on the same road; the lower the number, the higher the participation rate. In both cases, evidence of the measured correlation is presented, justifying their usefulness for planning. The multiple underlying factors causing the correlations are not identified here, but suggestions are made for further studies.     

Household Valuation of Curbside Recycling

This paper looks at the willingness to pay for, and participate in, a curbside recycling programme based on a survey of 401 residents in Ogden, Utah. Modifying the Cameron & James (1987) econometric model to fit ordered-interval data, we estimate that the mean willingness to pay for curbside recycling is US $2.05 per month, and that 72% of the residents would willingly participate in such a programme. Furthermore, females, young people, college-educated, those currently recycling without monetary reward, those regarding recycling as beneficial to the community and nation, and those with relatively high incomes are willing to pay the most for curbside recycling.     

Household Demand for Waste Recycling Services

Municipalities everywhere are coping with increasing amounts of solid waste and need urgently to formulate efficient and sustainable solutions to the problem. This study examines the use of economic incentives in municipal waste management. Specifically, we address the issue of recycling, if and when this waste management option is—on social welfare grounds—a preferred solution.A number of studies have recently assessed the monetary value of the externalities of alternative solid waste management options. In the present context, these subsidies could be interpreted as the implicit value of the benefits from reducing environmental externalities associated with landfilling as perceived by local government authorities. We surmise that the difference between mean households willingness to pay (WTP) for recycling services, via the purchase of a subsidized waste disposal facility, and the above (proxy) value of externalities reflects the difference between private and public perception regarding the negative externality associated with landfilling. We believe that this information is useful in determining the level of subsidization needed (if at all) to sustain any recycling program.The study is unique in the sense that its conclusions are based on revealed household behavior when faced with increased disposal costs, as well as information on WTP responses in hypothetical but related (and, therefore, familiar) scenarios. The article also explores the influence of the subsidization schemes on recycling rates. It was found that with low levels of effort needed to participate in a curbside recycling program, households participation rates are mainly influenced by economic variables and age, and households are willing to pay a higher price for the recycling scheme. When the required effort level is relatively high, however, households would pay a lower price, and the rate is influenced mainly by their environmental commitment and by economic considerations. We found that in both cases a subsidy would be required in order to achieve an efficient level of recycling. The median price that households are willing to pay for recycling devices is found to be about NIS 370 (New Israeli Shekel, approximately $90).     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

An Eco-balance of a Recycling Plant for Spent Lead–Acid Batteries

This study applies Life Cycle Assessment (LCA) methodology to present an eco-balance of a recycling plant that treats spent lead–acid batteries. The recycling plant uses pyrometallurgical treatment to obtain lead from spent batteries. The application of LCA methodology (ISO 14040 series) enabled us to assess the potential environmental impacts arising from the recycling plants operations. Thus, net emissions of greenhouse gases as well as other major environmental consequences were examined and hot spots inside the recycling plant were identified. A sensitivity analysis was also performed on certain variables to evaluate their effect on the LCA study. The LCA of a recycling plant for spent lead–acid batteries presented shows that this methodology allows all of the major environmental consequences associated with lead recycling using the pyrometallurgical process to be examined. The study highlights areas in which environmental improvements are easily achievable by a business, providing a basis for suggestions to minimize the environmental impact of its production phases, improving process and company performance in environmental terms.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.     

我国城市生活垃圾回收利用率测算及其统计数据收集对策

我国将生活垃圾分类收集定位为重要民生工程和生态文明建设的工作内容,并对实施生活垃圾强制分类的示范城市明确提出了"生活垃圾回收利用率"的绩效考核目标。由于城市生活垃圾处理和再生资源回收利用由不同职能部门负责管理,不同来源的生活垃圾回收利用统计数据未有效整合,目前还缺乏我国城市生活垃圾回收利用率指标测算的相关研究。本文界定了"生活垃圾回收利用率"的科学内涵,并以城市建设、再生资源利用等统计资料和物质流分析文献为基础,初步测算了全国尺度的城市生活垃圾回收利用率。研究表明,我国2006—2015年的城市生活垃圾回收利用率从12.1%上升至17.0%,然后又缓慢下降至15.6%,由于数据缺乏,该数值可能在-28%~+32%波动。生活垃圾中回收利用量较大的可再生资源分别为废纸、废塑料、废钢铁、废玻璃等。本文还分析了目前测算生活垃圾回收利用率的数据不确定性和局限性,提出了面向生活垃圾分类管理实际评价的统计数据收集对策。     

The Value-Action Gap in Waste Recycling: The Case of Undergraduates in Hong Kong

The discrepancy between verbal and actual commitment in waste recycling and environmental behavior is thought to have attenuated the effectiveness of many environmental policy and measures. Studies purport to show the existence of such a value-action gap in environmental issues has been largely based on matching the verbal commitment to environmental value through self-reported environmental behavioral data. Therefore, there is a lack of direct evidence to prove that such a discrepancy exists. This study demonstrates a methodology (contrasting on-site observation with self-reported results) to measure the gap between verbal commitment and actual recycling behavior and provides an explanation on the recycling behavior of students at Hong Kong Baptist University in the hope that the lessons learnt can be generalized to a wider context. Our findings indicate that a gap between verbal recycling commitment and corresponding action does exist in waste recycling on this university campus. By using multiple linear regression analysis, we found that the self-reported recycling behavior of undergraduates cannot be meaningfully explained by most variables previously suggested in the general value-action model.     

Economics and GHG emission reduction of a PLA bio-refinery system—Combining bottom-up analysis with price elasticity effects

This paper analyses energy savings, GHG emission reductions and costs of bio-refinery systems for polylactic acid (PLA) production. The systems comprise ‘multi-functional’ uses of biomass resources, i.e. use of agricultural residues for energy consumption, use of by-products, and recycling and waste-to-energy recovery of materials. We evaluate the performance of these systems per kg of bio-based polymer produced and per ha of biomass production. The evaluation is done using data of Poland assuming that biomass and PLA production is embedded in a European energy and material market. First, the performance of different bio-refinery systems is investigated by means of a bottom-up chain analysis. Second, an analysis is applied that derives market prices of products and land depending on the own-price elasticity of demand. Thus, the costs of bio-refinery systems depending on the demand of land and material are determined. It is found that all PLA bio-refinery systems considered lead to net savings of non-renewable energy consumption of 70–220 GJ/(ha yr) and net GHG emission reductions of 3–17 Mg CO_2eq/(ha yr). Most of these PLA bio-refinery systems lead to net costs for the overall system of up to 4600 €/(ha yr). PLA production from short rotation wood leads to net benefits of about 1100 €/(ha yr) if a high amount of a high value product, i.e. fibres, is produced. Multi-functionality is necessary to ensure the viability of PLA bio-refinery systems from biomass with regard to energy savings and GHG emission reduction. However, the multi-functional use of biomass does not contribute much to overall incomes. Multifunctional biomass use – especially the use of biomass residues for energy consumption – contributes significantly to savings of non-renewable energy sources. Own-price elasticity of the demand for materials influences the overall costs of the bio-refinery system strongly. The own-price elasticity of land demand markets could become important if bio-refineries are introduced on a large scale.     

Electronic waste recycling: A review of U.S. infrastructure and technology options

The useful life of consumer electronic devices is relatively short, and decreasing as a result of rapid changes in equipment features and capabilities. This creates a large waste stream of obsolete electronic equipment, electronic waste (e-waste).Even though there are conventional disposal methods for e-waste, these methods have disadvantages from both the economic and environmental viewpoints. As a result, new e-waste management options need to be considered, for example, recycling. But electronic recycling has a short history, so there is not yet a solid infrastructure in place.In this paper, the first half describes trends in the amount of e-waste, existing recycling programs, and collection methods. The second half describes various methods available to recover materials from e-waste. In particular, various recycling technologies for the glass, plastics, and metals found in e-waste are discussed. For glass, glass-to-glass recycling and glass-to-lead recycling technologies are presented. For plastics, chemical (feedstock) recycling, mechanical recycling, and thermal recycling methods are analyzed. Recovery processes for copper, lead, and precious metals such as silver, gold, platinum, and palladium are reviewed. These processes are described and compared on the basis of available technologies, resources, and material input–output systems.     

Motives as Predictors of the Public's Attitudes Toward Solid Waste Issues

/ Surveys focusing on solid-waste-related issues, conducted over a period of several years, provided data from independent samples of residents of a Midwestern, USA, community. The collection of these data yielded useful information about the relationship between residents' recycling motives and their attitudes toward solid waste management in light of several changes in the solid waste infrastructure of the community over that time. The initial survey assessed baseline beliefs and attitudes, while later surveys were conducted after the implementation of a community educational program and a curbside recycling program. The findings indicated that for recyclers and nonrecyclers, different motives predicted endorsement of solid waste programs and policies. Although a similar percentage of recyclers and nonrecyclers were in support of various proposed programs and policies, concern for the environment was found to be positively related to nonrecyclers' support of proposed programs, particularly before these programs were implemented. Prior to program implementation, motives other than environmental altruism were found to be related to recyclers' support of the programs. Additional findings support the idea that educational programs and increased accessibility to recycling opportunities affect the relationship between people's attitudes toward solid waste management and their recycling motives.     

Alternative treatments for the municipal solid waste and domestic sewage in Campinas,Brazil

The treatments of municipal solid waste (MSW) and the domestic sewage (DS) are critical issues of the current political and environment discussions. These concerns are due to the lack of dumping areas, the continuous increase of the population, and public health issues. The adequate treatment and management of MSW and DS can produce many benefits such as financial funds, heat and energy production, reduction of emissions and recuperation of water for reuse. Currently in Campinas MSW and DS are deposited in landfills or discharged into rivers and other sites. In the present study two scenarios are evaluated for the treatment of MSW and DS in Campinas: recycling with biological treatment and recycling with thermal treatment. The most suitable treatments for Campinas, based on the data from the present analysis and taking into consideration the local conditions, maximization of energy potential and environmental benefits, are incineration for the MSW and biological treatment for DS, both with energy recuperation. The main gains of this option are substantial environmental benefits, generated energy which can reach 18% of the total electrical energy consumed in Campinas while about 53% recuperation of the total amount of water treated for Campinas in 2010.     

Wasting ways: Perceived distance to the recycling facilities predicts pro-environmental behavior

The present study aims at providing an improved understanding of the environmental factors affecting pro-environmental behavior. To this end, we introduce the economic concept of bounded rationality to the domain of recycling behavior, hypothesizing that the subjective costs of recycling are a better predictor of an individual's tendency to recycle than the objective costs. At the chosen study site, recyclables needed to be disposed of at collection centers distributed throughout the city, allowing for the analysis of recycling-related costs by assessing the distance between participants’ residence and the nearest collection center. Results from an online questionnaire completed by N = 306 citizens indicate that the perceived distance to the recycling facilities is more closely related to recycling behavior than the actual distance. By means of hierarchical regression analyses, we demonstrate that the perceived distance explains unique variance in recycling behavior while the actual distance conveys only redundant information. Surprisingly, the predictive potential of participants’ distance estimates appeared to be significantly larger for recycling behavior than for recycling intention. The implications of our results are discussed with regard to potential opportunities to promote recycling behavior by targeting individuals’ biased perception of recycling-related costs.     

General vs. domain specific recycling behaviour—Applying a multilevel comprehensive action determination model to recycling in Norwegian student homes

This paper reports the results of a multilevel structure equation model predicting general and fraction specific self-reported recycling behaviour. The model was tested on a sample of 697 undergraduate students from four Norwegian universities who each reported their degree of participation in the local recycling schemes for paper/cardboard, glass, metal, and plastic. It was demonstrated that variance in recycling behaviour can be divided into a smaller general part that is relatively stable across waste fractions and a specific part that depends on the respective fraction. General recycling behaviour is well predicted by intentions to recycle and recycling habits, whereas perceived behavioural control is to a large extend fraction specific and influences the fraction specific recycling. Perceived behavioural control mediates the influence of the recycling scheme type, distance to recycling containers, and transport mode used to reach the recycling containers.