Algal toxicity induced by effluents from textile-dyeing wastewater treatment plants

This research aimed to evaluate the alga Scenedesmus obliquus toxicity induced by textiledyeing effluents(TDE).The toxicity indicator of TDE in alga at the physiological(algal growyth),biochemical(chlorophyll-a(Chl-a) synthesis and superoxide dismutase(SOD) activity) and structural(cell membrane integrity) level were investigated.Then we further study the relationship among toxicity indicators at physiological and biochemical level,and supplemented by research on algal biomacromolecules.According to the analysis of various endpoints of the alga,the general sensitivity sequence of toxicity endpoints of Scenedesmus obliquus was:SOD activity Chl-a synthesis algal growth.The stimulation rate of SOD activity increased from day 3(57.25%～83.02%) to day 6(57.25%～103.81%),and then decreased on day 15(-4.23%～-32.96%),which indicated that the antioxidant balance system of the algal cells was destroyed.The rate of Chl-a synthesis inhibition increased gradually,reaching19.70%～79.39% on day 15,while the rate of growth inhibition increased from day 3(-12.90%～10.16%) to day 15(-21.27%～72.46%).Moreover,the algal growth inhibition rate was positively correlated with the inhibition rate of SOD activity or Chl-a synthesis,with the correlation coefficients were 0.6713 and 0.5217,respectively.Algal cells would be stimulating to produce excessive reactive oxygen species,which would cause peroxidation in the cells,thereby destroying chloroplasts,inhibiting chlorophyll synthesis and reducing photosynthesis.With increasing exposure time,irreversible damage to algae can lead to death.This study is expected to enhance our understanding of the ecological risks through algal tests caused by TDE.     

氧基氯化铁非均相活化过一硫酸盐降解金橙Ⅱ

采用部分热分解法制备了氧基氯化铁（FeOCl）,用于活化过一硫酸盐（PMS）降解难降解偶氮染料金橙Ⅱ（AO7）.利用X射线光电子能谱分析（XPS）、扫描电镜（SEM）和X射线衍射光谱（XRD）对其进行了表征;通过实验评估FeOCl/PMS体系对AO7的降解效果并分析了影响AO7去除率的各种因素.结果表明：FeOCl活化PMS降解AO7效果良好,矿化率达44%.在中性条件下,当FeOCl投加量50mg/L、PMS浓度1.0mmol/L、AO7浓度0.05mmol/L时,AO7可在30min内完全降解.随PMS投加量、FeOCl投加量、Cl^-浓度和反应初始pH值的增大,AO7的脱色效果提高.FeOCl还具有良好的重复利用性.此外,通过自由基淬灭实验、EPR测试和XPS分析了反应的主要活性物种和反应机理：由PMS活化产生的SO₄^-·和·OH对污染物进行降解,其中主要活性物种为SO₄^-·.     

Cobalt in alluvial Egyptian soils as affected by industrial activities

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｎａｔｕｒｅＣｏｏｃｃｕｒｓｉｎｔｗｏｏｘｉｄａｔｉｏｎｓｔａｔｅｓ ,Ｃｏ2 + ａｎｄＣｏ3+ ,ａｎｄｆｏｒｍａｔｉｏｎｏｆｔｈｅｃｏｍｐｌｅｘａｎｉｏｎＣｏ(ＯＨ) - 3 ｉｓａｌｓｏｐｏｓｓｉｂｌｅ .ＤｕｒｉｎｇｗｅａｔｈｅｒｉｎｇＣｏｉｓｒｅｌａｔｉｖｅｌｙｍｏｂｉｌｅｉｎｏｘｉｄｉｚｉｎｇａｃｉｄｅｎｖｉｒｏｎｍｅｎｔ,ｂｕｔｄｕｅｔｏａｈｉｇｈｓｏｒｐｔｉｏｎｂｙＦｅａｎｄＭｎｏｘｉｄｅｓ,ａｓｗｅｌｌａｓｂｙｃｌａｙｍｉｎｅｒａｌｓ,ｔｈｉｓｍｅｔａｌｄｏｅｓｎｏｔｍ…     

石英表面配合物与溶解动力学模型

阐述了石英表面配合物和溶解动力学机理之间的关系，指出了石英的反应性主要受负电性表面物种的控制，从而导致电解质、离子强度、pH等因素对石英溶解的催化效应．溶解达率的提高与反应活化能的降低成活化熵的增大有关。最后，介绍了在过渡态理论和表面反应模型基础上建立的石英溶解速率方程。     

Neutron activation method in the analysis of environmental objects

ＮｅｕｔｒｏｎａｃｔｉｖａｔｉｏｎｍｅｔｈｏｄｉｎｔｈｅａｎａｌｙｓｉｓｏｆｅｎｖｉｒｏｎｍｅｎｔａｌｏｂｊｅｃｔｓＧ．Ｍ．Ｋｏｌｅｓｏｖ（Ｖ．Ｉ．ＶｅｒｎａｄｓｋｙＩｎｓｔｉｔｕｔｅｏｆＧｅｏｃｈｅｍ。＆Ａｎａｌ．Ｃｈｅｍ．，ＲｕｓｓｉａｎＡｃａｄ...     

无机高分子絮凝剂聚硅铝铁硼的制备及其絮凝性能研究

以工业水玻璃、氯化铝、氯化铁、硼酸为原料，制备了一种性能优良的无机高分子絮凝剂聚硅铝铁硼(PSBFA)。通过考察不同pH值条件下水玻璃的胶凝时间、Si／Al物质的量比、硼的浓度、熟化时间等因素对聚硅铝铁硼产品应用性能的影响，确定了聚硅铝铁硼的最佳制备条件为pH值为2～4，Si／Al物质的量比在1．0左右，硼的浓度为0．02mol／L，熟化时间为5d左右。絮凝应用实验表明，聚硅铝铁硼对于印染废水脱色效果、生活污水的COD去除率具有优异的絮凝性能；与传统混凝剂硫酸铝和市售混凝剂聚合氯化铝(PAC)相比，PSBFA的具有投加量少、沉降速度快、絮体体积小等优点。     

化学活化法制取污泥衍生吸附剂的实验研究

用有机污泥按照一定的工艺制作污泥衍生吸附剂。结果表明，氯化锌作为化学活化剂在吸附剂的生成过程中起到了关键作用，热解温度是影响吸附剂性能的最主要因素，750℃是最佳热解温度。     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

去除城市生活污泥中有机络合态金属强化其厌氧生物制气

为提高城市生活污泥厌氧消化沼气产率,本文考察了通过金属络合剂EDTA预处理污泥,以去除城市生活污泥中有机络合态金属,强化其厌氧生物制气的效果.结果表明,经EDTA预处理去除金属后的污泥(实验组)较未预处理的污泥(对照组)的有机络合态金属含量减少[(5.09±0.57)%~(1.37±0.20)%,以TS计],溶解性有机质显著提高(SCOD提升627%),暗示该预处理方法能够极大地去除有机络合态金属并强化污泥有机质的溶出.通过测定污泥有机质溶出表观活化能发现,实验组污泥有机质溶出表观活化能比对照组降低36%,表明预处理能够有效降低有机质溶出反应的能量壁垒.污泥厌氧发酵研究发现,在16d的污泥厌氧产酸实验中,实验组VFAs浓度高于对照组,较对照组最大提升42%;在22 d的污泥厌氧产甲烷测试实验(BMP)中,实验组单位有机质累积甲烷产量比对照组增加48%,表明EDTA预处理对提高污泥厌氧消化产沼气具有重要的作用.通过进一步产沼气动力学研究发现,实验组的产沼气限速步骤在产甲烷阶段,而对照组限制于水解阶段,表明经EDTA预处理能有效地破除城市生活污泥厌氧消化过程的水解限速.     

热活化镁砂的表征、吸附性能及其对含油废水的处理效果研究

通过对镁砂进行改性试图提高其吸附性能,并用于处理含油废水。对镁砂进行热活化处理,并对处理前后的镁砂进行了X射线衍射分析、TG-DSC热分析及扫描电镜分析。再将热活化后的镁砂用于处理模拟含油废水,考察了焙烧温度、吸附剂用量、pH、温度等因素对模拟含油废水中COD去除效果的影响。根据实验结果,确定镁砂的热活化温度为500℃,利用热活化后的镁砂吸附去除模拟含油废水中的COD,处理后出水COD浓度可满足GB 8978—1996《污水综合排放标准》一级标准。