洗车业污染现状及管理对策

城市洗车业存在水资源严重浪费，行业管理不到位导致水体污染等诸多问题，却没能引起有关部门重视。为此，针对洗车业存在的问题，以徐州市为例，从管理、技术、经济等多角度、多层面进行分析，提出了相应的建议和对策。     

烹饪油烟污染与处理技术探讨

为了降低油烟对环境的污染,分析了油烟中的主要污染物成分及油烟对人体健康的几种危害。讨论了五种油烟净化技术:惯性分离法、过滤分离法、液体洗涤法、静电沉积法、复合技术。分析了液体洗涤油烟净化技术的原理、水循环利用时对洗涤废液进行的油水分离,提出了采用流场分析喷淋,以了解其流场的特性。结果表明,采用液体洗涤法去除油烟效率高,安全可靠。     

我国汽车报废回收利用体系框架初探

主要介绍了国内外废旧汽车回收处理现状,并从法制建设、回收网络构建、回收技术研究、宣传教育等方面提出了我国应对废旧汽车回收利用的对策建议。     

印染废水中铬的活性炭吸附及资源化研究

在实验室条件下利用活性碳柱对印染废水进行了铬的吸附,对活性碳柱进行逐级加热、逆流漂洗再生,达到了较好的处理效果,同时还回收了铬盐。     

Development of a fuel cell propulsion system for the existing Mercedes B-Class 160 of petrol driven car

This paper presents a theoretical comparison between fuel cell (FC) power train and conventional petrol driven propulsion system. FC has potential to reduce the CO₂-emissions from road. However, FC power trains require energy storing device, to meet the peak power during extreme drive situations and also able to recover the kinetic energy of the vehicle during break operation. The proposed system includes a polymer electrolyte membrane fuel cell (PEMFC) based drive train and a super capacitor connected in parallel. The system is designed and dimensioned for a conventional petrol driven propulsion system of the Mercedes B-Class160. The feasibility study also includes comparison between the existing conventional systems. It is shown that although FC power train is heavier compared to existing system, urban performance is better and produces no CO₂ and other harmful emissions.     

汽车音响行业的环境试验方法

本文通过介绍汽车音响产品的环境应力和故障模式,对环境试验的流程和方法进行了描述。并通过引用国内外相关环境试验标准,对环境试验在汽车音响产品上的应用进行了分析和举例。     

车内空气污染及控制

近年来,人们越来越关注车内空气污染。但人们对车内空气污染的了解甚少。本文就车内空气污染的污染源、污染物、健康影响、治理措施,相关标准等一系列问题,作系统论述。     

吸收液pH值对锌合金白烟处理效果的影响

为了治理同时含有气态和粒状污染物的锌合金白烟,采用填料塔对其进行洗涤和吸收,考察了吸收液的pH值以及喷淋密度对锌合金白烟处理效果的影响,并根据碱洗和酸洗的特点,考察了碱酸两级处理的效果.结果显示,吸收液的喷淋密度与氯化铵烟尘、氯化氢和氨的处理效率成正比.吸收液的pH值也会影响白烟的处理效果,主要是通过吸收液与污染物之间的化学反应来进行,碱洗时氯化铵烟尘和氯化氢获得了较高的处理效率,但碱洗过程有氨生成,限制其应用;酸洗对氨的处理效率较高,但氯化铵烟尘和氯化氢的处理效率都比较低,达不到国家排放标准.尽管对锌白烟的处理效果还不理想,但试验结果对于锌白烟的治理具有重要的参考价值和指导意义.     

Physical Modeling of Emissions from Naturally Ventilated Underground Parking Garages

The dispersion of pollutants from naturally ventilated underground parking garages has been studied in a boundary layer wind tunnel. Two idealized model setups have been analysed, one was simulating pollutant dispersion around an isolated rectangular building and one was representing dispersion in a finite array of idealized building blocks. Flow and dispersion close to modelled ground level emission sources was measured. The results illustrate the complexity of the flow around buildings and provide insight in pollutant transport from ground level sources located directly on building surfaces. As a result, areas critical with respect to high pollutant concentrations could be visualized. Particularly, the results show high concentration gradients on the surface of the buildings equipped with modelled emission sources. Inside the boundary layers on the building walls, a significant amount of pollutants is transported to upwind locations on the surface of the building. The paper documents the potential of physical modelling to be used for the simulation and measurement of dispersion close to emission sources and within complex building arrangements.     

利用空气自动监测车仪器对空气自动监测站仪器进行质量保证及质量控制的可行性分析

通过对辖区内空气自动监测车仪器与4家公司空气自动监测站仪器的比对分析,得出了空气自动监测车仪器与空气自动监测站仪器的PM10、SO2、NO2相对误差分别为:-32.8%、4.4%、-8.7%,仪器之间显现出良好的线性关系,从比对结果来看,利用空气自动监测车对空气自动监测站进行质量保证和质量控制是可行的.