风能资源评估系统开发与应用

开发风能资源、利用风力发电在我国虽然只有数十年，但其发展却很快，风能作为可再生的清洁能源也越来越受到重视。风能资源评估作为风电资源开发的前提，是风力机选址的关键。介绍了以Visual Basic为开发工具，利用SQL Server为数据库开发而成的风能资源评估系统的结构和特点。经实践证明，本系统缩短了风能资源评价周期，提高了数据处理可靠性。     

Climate Convention Implementation: An Opportunity for the Pacific Island Nations to Move Toward Sustainable Energy Systems

This article does not focus on adaptation or mitigation policy directly but on an allied opportunity that exists for the Pacific Islands via the auspices of the Climate Convention, because the existing very costly energy systems used in the Pacific Island region are fossil-fuel dependent. It is argued here that efforts can be made towards the development of energy systems that are ecologically sustainable because Pacific Island nations are eligible to receive assistance to introduce renewable energy technology and pursue energy conservation via implementation mechanisms of the Climate Convention and, in particular, through transfer of technology and via joint implementation. It is contended that assistance in the form of finance, technology, and human resource development from developed countries and international organizations would provide sustainable benefits in improving the local Pacific Island environments. It is also emphasized that mitigation of greenhouse gas emissions is not the responsibility of the Pacific Islands as they contribute very little on a per capita global scale and a tiny proportion of total global greenhouse gas emissions.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

污水低氧脱氮机制及其应用研究进展

阐述了污水低氧脱氮的基本原理,即抑制或去除亚硝酸盐氧化菌(NOB),同时保留氨氧化菌(AOB),并保持其活性;探讨了污水低氧脱氮实现途径;详细介绍了几种典型的污水低氧脱氮工艺(短程硝化(SHARON)工艺、厌氧氨氧化(ANAMMOX)工艺、好氧反氨化(DEMON)工艺、低氧自养硝化反硝化(OLAND)工艺、甲烷营养型硝化反硝化工艺和亚硝酸盐型完全自养脱氮(CANNON)工艺)的应用研究进展;最后对污水低氧脱氮处理工艺的工程运用进行了展望.     

重复碰撞载荷下加筋板结构的动态响应研究

目的 探究船体加筋板结构在受到重复碰撞载荷作用下塑性变形的累计趋势,分析加筋板主要参数对损伤演化过程的影响,揭示高速、重复冲击下船体加筋结构的变化机理。方法 以一纵三肋加筋板为研究对象,建立基于能量法的刚塑性加筋板动态变形计算方法,以及基于Johnson-Cook本构关系的数值模拟方法,开展不同板架厚度、冲击能量以及冲击尺寸等参数对加筋板变形演化影响的研究。结果 对比分析了理论模型和数值方法,获得了不同参数下的加筋板的结构损伤演化规律。结论 理论解和数值解较为吻合。冲击能量增加后,加筋板的塑性变形量、塑性变形累积速度也随之增加。载荷集中程度越大,对于碰撞边界的破坏效应越大。     

工业园能源代谢分析

运用工业代谢分析方法对某农药化学工业园能源代谢系统进行量化分析. 结果表明:提升能源转化水平、改善能源利用效率是优化该工业园能源系统的2个有效途径,可减少能源代谢过程中的资源消耗与环境压力. 进一步根据能源代谢模型量化分析得出,提升工业园热电厂运行水平,达到供热煤耗0.043 t/GJ,供电煤耗4.538 t/(104 kW·h)(2004年江苏省平均水平),将较2005年水平减少原煤消耗35.31%;将能源利用水平较低企业的电力利用效率和蒸汽利用效率分别提高到园区平均水平(58.01%和63.84%),可较2005年水平减少原煤消耗2.5%左右.      

A+OSA活性污泥工艺剩余污泥减量特性研究

采用自动热量计对Anoxic (A) + oxic-settling-anaerobic(OSA)系统解偶联池进出污泥进行热值分析,以考察污泥量变动与能值变动的相互关系;通过解偶联池参数调整,了解污泥减量趋势,结合能量和物质平衡与常规水质指标测试,推测减量途径和特性.结果表明,解偶联池水力停留时间为5.56、 7.14和9 h时,整个系统污泥减量分别为1.236、 0.771和0.599 g/d.进出解偶联池的污泥含能水平发生了变化,随停留时间增加出流污泥的单位热值有高于进流污泥单位热值的趋势：5.56 h时,进出水热值没有显著差异;7.14 h时,进出水热值差值在99～113 J/g之间;9 h时,差值在191～329 J/g之间.解偶联池发生了污泥的衰减,停留时间延长,衰减程度越高.A+OSA系统污泥减量是解偶联池污泥衰减与AO主体反应区污泥产生率变化共同作用的结果.     

Validation of Methods for Determination of Metabolic Rate in the Edholm Scale and ISO 8996

The aim of this study was to validate the Edholm scale (Edholm, 1966) and the ISO 8996 standard (International Organization for Standardization [ISO], 1990) by comparing the metabolic rates estimated for both methods with the actual measured metabolic rate (M_Meas) in 6 manual material handling tasks simulated under laboratory conditions. The metabolic rate was calculated from oxygen consumption VO₂ (19 participants) according to Standard No. ISO 8996 (ISO, 1990). Additionally, the participants estimated perceived exertion using the Borg scale. The metabolic rates derived from the Edholm scale (M_Edh) overestimated 5 of 6 activities by 34-50% (α = .05). The metabolic rates derived from ISO 8996 (M_ISO) overestimated all activities by 7-38% (α =.05).     

基于完全因素分解法的能源效率影响因素研究

“十二五”是我国全面建成小康社会的关键阶段,又由于环境和资源禀赋方面的制约,提高能源效率成为我国经济和社会发展的内在需求.从能源强度的角度出发,分析了我国产业结构和能源效率现状,采用完全因素分解法,从产业结构的角度人手对全国能源效率的影响因素进行了研究.结果表明,技术因素是我国能源效率提高的主要推动力,第二产业对能源效率的影响远远大于第一和第三产业.     

风电行业安全生产风险特征与对策

系统检索了2000至2012年年底风电行业事故情况,从事故总数、死亡人数及事故类型展开分析。结果表明,风电行业风险具有自身特征,事故一直呈现上升趋势,其中叶片损坏、火灾、结构毁损、抛冰、交通运输、环境破坏等事故比较突出,对从业人员和公众构成威胁。我国风电行业正处于快速扩张期,内在风险较高,需引起行业主管部门和企业的高度重视,开展全产业链系统安全研究和管理手段创建,开发本质安全型工艺和设备,强化施工及运营安全管理。分析结果对指导风电行业安全管理决策和提升企业安全管理水平具有现实意义。