Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Prenatal prediction of childhood-onset spinal muscular atrophy (SMA) in Turkish families

Childhood-onset spinal muscular atrophy (SMA) is one of the most common neurodegenerative genetic disorders. SMN1 is the SMA-determining gene deleted or mutated in the majority of SMA cases. There is no effective cure or treatment for this disease yet. Thus, the availability of prenatal testing is important. Here we report prenatal prediction for 68 fetuses in 63 Turkish SMA families using direct deletion analysis of the SMN1 gene by restriction digestion. The genotype of the index case was known in 40 families (Group A) but unknown in the remaining 23 families (Group B). A total of ten fetuses were predicted to be affected. Eight of these fetuses were derived from Group A and two of these fetuses were from Group B families. Two fetuses from the same family in Group A had the SMNhyb1 gene in addition to homozygous deletion of the NAIP gene. One fetus from Group A was homozygously deleted for only exon 8 of the SMN2 gene, and further analysis showed the presence of both the SMN1 and SMNhyb1 genes but not the SMN2 gene. In addition, one carrier with a homozygous deletion of only exon 8 of the SMN1 gene was detected to have a SMNhyb2 gene, which was also found in the fetus. To our knowledge, these are the first prenatal cases with SMNhyb genes. Follow-up studies demonstrated that the prenatal predictions and the phenotype of the fetuses correlated well in 33 type I pregnancies demonstrating that a careful molecular analysis of the SMN genes is very useful in predicting the phenotype of the fetus in families at risk for SMA. Copyright © 2002 John Wiley & Sons, Ltd.     

Split-hand/split-foot malformation with paternal mutation in the p63 gene

We report the prenatal diagnosis at 16 weeks' gestation of bilateral split-hand/split-foot malformation (SHSFM) with severe lobster claw deformity of hands and feet in a male fetus without associated malformations. A minor manifestation of SHSFM was present in the father with only mild bilateral foot involvement (syndactyly I–II; cleft II–III; left cutaneous syndactyly III–IV). Mutation analysis of the p63 gene on chromosome 3q27 showed a missense mutation 577A→G (predicting amino acid substitution K193E) in the father. This mutation has not been reported so far in SHSFM but resembles the previously reported 580A→G (predicting amino acid substitution K194E) in a family with SHSFM. Copyright © 2001 John Wiley & Sons, Ltd.     

外商投资的区位变动分析

文章利用1983—2000年的统计数据，通过比较分析方法，分析了我国外商投资区位的转移及其影响因素的变化，综合评价了我国中部5省、华东和西部的区位优势，提出了有利于吸引外商投资的建议。     

省以下生态转移支付制度环境保护激励效应

现有文献认为生态转移支付具有基本公共服务均等化与提升地方生态环境质量双目标,而目标的多样性会影响地方财政转移支付资金效果及目标的实现。文章基于环保支出和农林水支出的中介与调节效应,对生态转移支付的生态环境目标进行了理论分析,利用2010—2018年甘肃、贵州、湖北及河南四省的199个县的面板数据进行实证检验。实证研究表明:在样本期内,生态转移支付促进了地方生态环境质量的提升,中介效应和调节效应模型的结果表明,中国地方生态转移支付资金对辖区环境保护效果中,环境保护支出起到部分中介效应,农林水支出不仅调节了生态转移支付的地方环境保护支出效果,而且调节了环境保护支出对地方环境质量的影响。因此,由于地方政府具有环境治理信息优势,省以下制度目标更能体现辖区生态需求,省对县生态转移支付制度会有效促进地方生态环境质量的改善,环保激励效应较为明显。同时,县级地方政府应该逐步摆脱"先污染后治理"的路径依赖,逐步转向经济与环境"双目标协同发展"模式。为了协同生态转移支付的双目标,"自下而上参与式决策"可以作为环境治理的有益补充,通过地方政府多元化实践改善环境质量。     

内饰材料发射率对密封舱室热防护效率的影响

目的探究密封舱室热防护效率与其内饰材料表面发射率的关系,分析内饰材料发射率对其表面温度、舱室内温度的影响规律。方法采用自行设计的小型密封舱室和加热测量装置,对内饰材料表面及舱室内温度进行测量。结果当内饰材料发射率为0.09时,内饰表面温度为141.2℃,舱室内平均温度仅为90.8℃;内饰材料发射率为0.91时,内饰表面温度为124.4℃,舱室内平均温度为109.1℃。结论试样表面温度随材料发射率的提高而降低,舱室内部空气平均温度随材料发射率的提高而升高;试样表面温度与舱室空气平均温度的温度差随材料发射率的提高而减小;同时,相同试样表面温度与舱室平均温度的温度差随加热温度的提高而增加。     

四环素胁迫对Shigella flexneri细菌四环素抗性基因抗性表达的影响过程

四环素(TC)抗生素在不同环境介质中已被广泛检出,为研究其对四环素抗性基因(TC-ARGs)丰度变化及表达水平的影响过程,以从活性污泥中筛选和纯化分离获得的弗氏志贺氏菌(Shigella flexneri)为研究对象,考察了不同浓度TC对其生长过程的作用影响,采用荧光定量PCR和逆转录PCR方法定量检测了不同抗性机制TC-ARGs,包括tetC、tetO和tetX基因的丰度变化及表达水平,并探讨了TC浓度与TC-ARGs丰度及其表达水平之间的相关关系.结果表明,在培养周期内(24 h),TC胁迫对Shigella flexneri细菌的生长具有抑制作用,细菌细胞浓度增长速率随TC暴露浓度的升高而降低,但对TC-ARGs丰度变化影响较小.TC胁迫能够促进Shigella flexneri细菌TC-ARGs的转录表达,tetC、tetO和tetX基因表达水平在整个培养周期内均先升高后降低.由相关性分析可知,TC浓度与TC-ARGs丰度及其表达水平之间相关关系不显著,但tetC和tetO基因丰度与其转录表达水平之间存在显著的正相关关系,表明其基因丰度一定程度上可用来衡量和评价其抗性表达水平.     

华北地区沙尘天气垂直气溶胶直接辐射强迫

利用CALIOP数据和SBDART（Santa Barbara DISORT Atmospheric Radiative Transfer）辐射传输模式研究了2013~2016年华北地区8d沙尘天气气溶胶及其直接辐射强迫垂直分布特征,分析了气溶胶垂直分布和光学特性对直接辐射强迫的影响.结果表明,气溶胶集中分布在地表及以上3km范围,其中纯净沙尘型和污染沙尘型气溶胶位于上层,污染大陆型气溶胶和烟雾位于下层.大气层顶、地表和大气层的日均气溶胶直接辐射强迫分别是-38.41~-88.44,-74.03~-225.86,9.06~137.42W/m².0~8km高度范围气溶胶直接辐射强迫是负值,且随着高度的增加绝对值逐渐减小.气溶胶垂直分布对大气层顶、地表和大气层的直接辐射强迫影响较小,但对直接辐射强迫垂直分布影响较大,由气溶胶廓线差异造成的同一高度层气溶胶直接辐射强迫最大差值能达到31.18W/m².气溶胶光学厚度和单次散射反照率对直接辐射强迫影响明显.消光能力相同时,吸收性气溶胶对短波太阳光的衰减作用大于散射性气溶胶,后向散射比例大的气溶胶大于后向散射比例小的气溶胶.