负载壳聚糖膨润土的制备及其吸附性能的影响

以天然膨润土和壳聚糖为原料,制得一种新型水处理剂——负载壳聚糖膨润土,研究了制备条件对酸性大红印染废水处理效果的影响。实验表明,当壳聚糖的浓度为30 g/L、膨润土质量与壳聚糖溶液体积之比为0.7、浸泡时间80 min、微烘时间15 min时,壳聚糖改性膨润土对酸性大红印染废水的脱色率可达97%。对改性土进行比表面积测定、电镜扫描及X-射线衍射等结构特性分析,证明壳聚糖的引入改变了膨润土在水中的分散状态,增强了其对污染物的吸附和离子交换能力。     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

HAN基ECSP凝胶模型的构建与分子动力学模拟

目的 从微观分子的角度对硝酸羟胺(HAN)基电控固体推进剂(Electrically Controlled Solid Propellants,ECSP)的性能参数进行模拟与计算。方法 利用分子表面静电势(ESP)对HAN分子2种可能的构型进行优化和稳定性分析。通过真空非周期性分子动力学模拟得到聚乙烯醇(PVA)分子稳定构型,并以HAN基ECSP的主要成分按一定比例构建凝胶模型。基于RESP(Restrained Electrostatic Potential)电荷生成更准确的凝胶模型拓扑文件,并进行凝胶模型的分子动力学模拟、模型稳定分析以及模型参数计算。结果 凝胶模型总能量相对平均值的周期性波动不超过7%。由于三维PVA链的包裹,H2O分子的扩散系数被大幅削弱。氢键分析和径向分布函数表明氢键键长主要分布在0.282 6 nm附近,PVA与H2O间的氢键较少,H2O与HAN、H2O与H2O之间的氢键较多。模型密度为1.405 g/cm³,与实验值吻合度高。在283、293、303 K下,HAN基ECSP凝胶模型的拉伸模量依次降低,剪切模量先增后减。在15 K/600 ps冷却速率下,HAN基ECSP凝胶模型的拉伸模量和剪切模量均增大。结论 ECSP制备结束后,冷却过程中的环境温度不宜过高,否则容易造成ECSP力学性能的快速下降,快速冷却可以提高ECSP的力学性能。     

异丙醇助水热法制备钛酸铋粉体的光催化性能

以B(iNO)3·35H2O和T(iSO)42为反应物,用异丙醇助水热法制备了钛酸铋光催化剂,并研究不同水热温度和水热时间对样品光催化活性的影响。用XRD表征了样品的结构,UV-vis漫反射测试显示含有Bi12TiO20的样品的吸收带发生了红移,BET测试表明样品的比表面积远远高于化学溶剂分解法制备的钛酸铋的比表面积。以甲基橙为模拟污染物,评价了样品的光催化性能,发现当水热反应温度为140℃,水热反应时间为2.5h时,样品的光催化活性最高,且超过P25。     

基于指标模糊权和协调性下的地下水水质评价模型构建及应用

在地下水质量标准中,各指标权重的选择与权重的内涵存在着不确定性;同一指标的分级界点值差异显著,近似地呈现几何级数变化。基于以上这两种情况,构建基于指标模糊权和协调性下的地下水水质评价模型。应用层次分析法和专家调查9标度法确定指标的相对权重,结合贝塔系数计算出指标的模糊权重。对评价标准及待评价地下水水质监测值进行对数变换,采用距离测度法来构造隶属函数,并对其进行求余,按最大隶属原则来评判地下水质量等级。应用此模型对徐州市的重要水源地——张集地下水水质进行评价。结果表明:研究区的20个采样点水质为Ⅱ、Ⅲ级的占90%,符合饮用水的要求。与投影寻踪法的评价结果基本一致。     

猪场废水厌氧氨氧化脱氮的短程硝化反硝化预处理研究

在常温(13～20℃)、不调节pH的条件下,采用短程硝化反硝化预处理低C/N（2左右）猪场废水,考察了反硝化与亚硝化过程,并以经过短程硝化反硝化预处理的猪场废水为进水,分析了厌氧氨氧化的脱氮效果.结果表明,采用短程硝化反硝化预处理低C/N猪场废水,可以达到去除部分COD、部分脱氮、控制出水氨氮和亚硝态氮浓度之比在1∶1左右、pH在7.5～8.0左右的目的,为厌氧氨氧化创造了进水条件,全程COD和总氮平均去除率分别为64.3%和49.1%;经过短程硝化反硝化预处理的猪场废水,其厌氧氨氧化脱氮效果稳定,氨氮、亚硝态氮、总氮的平均去除率分别为91.8%、99.3%、84.1%.     

酚类化合物气相色谱保留指数的定量结构相关性研究

应用偏最小二乘回归技术建立了102种酚类化合物气相色谱保留指数与分子全息结构间的相关模型,在最佳建模条件下得到非交叉验证相关系数(r2)为0.965,交叉验证相关系数(q_LOO2)为0.963. 从102种酚类化合物中随机选出68种作为训练集,其余作为测试集,来验证分子全息QSRR模型的预测能力和稳健性. 在最佳建模条件对训练集进行偏最小二乘回归分析,r2为0.967,q_LOO2为0.927. 用训练集数据所建立的QSRR模型预测测试集中酚类化合物的色谱保留指数,结果表明,基于训练集所建立的QSRR模型具有很高的预测能力和稳健性,可以对测试集酚类化合物的气相色谱保留指数进行很好的预测. 此外,利用最佳全息定量结构保留关系(HQSRR)模型的色码图,探讨酚类化合物中的不同侧链基团对其色谱保留性质的影响,及其在固定相上的色谱保留机理.      

Handling Techniques: The Influence of Weight and Height for Experts and Novices

The purpose of this study was to evaluate the influence of the weight of the load (12 kg, 22 kg) and of the height of the grasp (high: 126 cm; middle: 64 cm and 95 cm; low: 33 cm) on the handling techniques adopted by six experienced handlers and six novices having only limited handling experience during a free box-handling task. Each subject had to transfer two sets of 16 boxes from a platform to a four-wheel cart. The observations dealt with the position of the subject at the beginning of transfer and at deposit (position of the back, knees and feet, pelvic orientation, position of the hands), his way of moving during the transfer (position of the feet), and his way of positioning and moving the box during handling (tilt of the box, impulse given to the box, grip change). The results show that the weight and the height of grasp/deposit had an influence on the techniques adopted by expert handlers and novices. Some of these variations are common to both groups but many of them are not, such as the position of the knees, the grips and the position of the box. This study suggests that there is not one method that is suitable for all situations, and that expert handlers may have learned how to adjust their methods to the working environment. A better understanding of the experts’ techniques could help in redesigning efficient training programs.     

Prevalence of Musculoskeletal Disorders at Workplaces in the People’s Republic of China

This paper presents 2 musculoskeletal disorders questionnaire surveys in 10 different Chinese occupational groups. Data collected from 1,603 workers using a modified Nordic musculoskeletal disorders symptom questionnaire showed that the 12-month prevalence of musculoskeletal disorders, particularly in the low back and shoulder-neck regions, was high at many Chinese workplaces. Significant differences existed between occupational groups. Assembly workers usually had higher neck-shoulder complaints compared to workers in most other occupations. However, the nature of assembly seemed also to influence the prevalence rate. Workers at a cassette recorder and a TV set assembly plant appeared to have more neck complaints compared with a group of thermos flask assemblers.     

An Evaluation of the NIOSH Lifting Equation: A Psychophysical and Biomechanical Investigation

Using the results of psychophysical and biomechanical experiments, NIOSH (National Institute for Occupational Safety and Health) Recommended Weight Limit (RWL), the Lifting Index (LI), the form of the asymmetry multiplier, and the criterion for compression force were investigated. Analysis of the results indicated a significant difference between the NIOSH RWL and the reported Maximum Acceptable Weight of Lift (MAWL). Contrary to the NIOSH lifting equation, the form of the asymmetry multiplier was found to be non-linear. The overall average of peak compression force on the L5/S1 was 3685 N. Fifty-eight percent of all compression forces reported in the biomechanical experiment were found to exceed the suggested 3400 N set by NIOSH guidelines. These results support previous research findings on the validity of NIOSH guidelines.