Catalytic dechlorination of o-chlorophenol by nanoscale Pd/Fe

IntroductionTheuseofzerovalentironforthetreatmentofchlorinatedorganiccompounds (COCs )inwaterandgroundwaterhasbeenthefocusofmuchrecentresearch .Thestudieswereconcernedwithcompoundssuchascarbontetrachloride(Bradley ,1995 ) ,trichloroethene(Orth ,1996 ;Chen ,2 0 0 1)andpesticidesandrelatedcompounds(Sayles,1997;Monson ,1998;Eykholt,2 0 0 1;Dombek ,2 0 0 1) .Whenironisincontactwithalessreductivemetal,themetalcouplecanformgalvaniccells.ThishasledtothediscoveryofPd Febimetalliccomplexinwhichpal…     

煤飞灰中铬铁元素的形态分析研究

用连续提取法将煤飞灰中的铬、铁元素依结合态区分为水溶态,交换态,表面氧化物和碳酸结合态,铁锰氧化物结合态,金属有机物和硫化物结合态,磁性四氧化三铁结合态和硅铝酸盐矿物态,用原子吸收法及X-衍射分析进行测定。并对煤飞灰化学形态分布进行了讨论。     

锰砂表面改性去除酚类化合物的研究

本文叙述了锰砂表面改性(以下简称旧锰砂)处理含酚饮用水的实验研究,陈酚率可达99％。本实验对除酚因素(温度、pH值、流速和接触时间等)进行了实验研究。当进水酚浓度≤2.0mg/l时,经旧锰砂的吸附,可使酚浓度≤0.002mg/l。     

What do economic simulations tell us? Recent mergers in the iron ore industry

This paper investigates the European Commission's decision to allow a merger between two Brazilian iron ore mining companies, CVRD and Caemi, using data on the Direct Reduced Iron pellet market. By using a simulation model, we can directly simulate the total welfare effects from the merger and hence evaluate the merger from a new perspective. The results from our simulations suggest that the welfare effects are negative from the merger between CVRD and Caemi, which supports the conclusion drawn by the European Commission decision. By performing different simulations between hypothetical merger candidates, our results show that only mergers between small candidates have the potential to be welfare enhancing.     

Fe3O4/ZrO2-H2O2非均相类Fenton体系对3,4-二氯三氟甲苯的降解

以浸渍法制备的新型纳米Fe3O4/ZrO2为催化剂,3,4-二氯三氟甲苯(3,4-DCBTE)为目标污染物,用Fe3O4/ZrO2-H2O2非均相类Fenton体系对目标污染物进行降解,考察催化剂的催化效果和温度、pH、H2O2投加量和掺杂比等因素对催化剂催化效果的影响。结果表明,以纳米Fe3O4/ZrO2作为催化剂的非均相类Fenton体系对3,4-二氯三氟甲苯的处理效果极佳;随着温度的升高,纳米Fe3O4/ZrO2的催化效果不断提高;当pH降低时,催化剂的催化效果有明显提升,原始pH(pH=5.7)时反应去除效果最佳,去除率可达88.6%;催化剂用量的增加同样可以提高3,4-二氯三氟甲苯的降解效率;催化剂中Fe3O4:ZrO2的物质的量比为1:2时效果较其他掺杂比的催化剂效果更好,去除率最终可以达到96.82%;当H2O2投加量增加时,3,4-二氯三氟甲苯的降解效率先提高后降低,投加量为0.3 mL时去除效果最好,几乎可以完全去除目标有机物。以Fe3O4/ZrO2-H2O2非均相类Fenton体系处理3,4-二氯三氟甲苯时,目标污染物的降解符合一级反应动力学。     

活性氧化铁/石英砂吸附剂去除水体中的重金属

介绍了活性氧化铁／石英砂吸附剂的特点和制备方法。该吸附能有效去除水体中的重金属，包括阳离子、阴离子、重金属颗粒物及一些络离子，且容易再生，被吸附的金属可以回收。     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

树脂基纳米零价铁复合材料的制备及其去除重金属铅Pb(Ⅱ)的性能研究

凭借着优越的还原活性,纳米零价铁在环境污染治理和修复领域应用广泛。通过将纳米零价铁(n ZVI)颗粒负载到大孔阴离子和阳离子交换树脂上,成功制备出2种树脂基纳米零价铁复合材料。研究了2种复合材料及其载体对水溶液中Pb(Ⅱ)的去除性能,考察了不同载体功能基团对复合材料去除Pb(Ⅱ)性能的影响。结果表明:以大孔阴离子交换树脂为载体的D001-Fe0复合材料因具有离子交换和化学还原双重作用,对Pb(Ⅱ)的去除效率高、速率快。     

有机蒙脱石负载纳米铁去除溶液中四溴双酚A的研究

研究了改性蒙脱石负载纳米铁材料(NZVI-CMT)在甲醇-水体系中对四溴双酚A(TBBPA)的去除作用,并确定了反应温度、TBBPA初始浓度以及材料投加量等因素对去除效果的影响.结果表明,在25℃条件下,0.02 g NZVI-CMT对初始浓度为10 mg·L-1TBBPA溶液的去除率可达97.5%,而且NZVI-CMT对TBBPA的去除率明显高于两种单一材料即纳米零价铁(NZVI)及有机蒙脱石(CMT)的去除率(18.3%、67.3%),同时也大于两者之和(85.6%).利用NZVI-CMT对TBBPA进行重复去除实验时,前3次的去除率均可达到90%以上.通过检测降解产物并分析材料对TBBPA去除过程的特性,发现NZVI-CMT对TBBPA的去除以吸附为主,并伴有少量还原脱溴反应发生,而且较高的反应温度对降解反应有利.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.