Influence of driving cycles on exhaust emissions and fuel consumption of gasoline passenger car in Bangkok

The influence of different driving cycles on their exhaust emissions and fuel consumption rate of gasoline passenger car was investigated in Bangkok based on the actual measurements obtained from a test vehicle driving on a standard chassis dynamometer. A newly established Bangkok driving cycle (BDC) and the European driving cycle (EDC) which is presently adopted as the legislative cycle for testing automobiles registered in Thailand were used. The newly developed BDC is constructed using the driving characteristic data obtained from the real on-road driving tests along selected traffic routes. A method for selecting appropriate road routes for real driving tests is also introduced. Variations of keyed driving parameters of BDC with different driving cycles were discussed. The results showed that the HC and CO emission factors of BDC are almost two and four times greater than those of EDC, respectively. Although the difference in the NOx emission factor is small, the value from BDC is still greater than that of EDC by 10%. Under BDC, the test vehicle consumes fuel about 25% more than it does under EDC. All these differences are mainly attributed to the greater proportion of idle periods and higher fluctuations of vehicle speed in the BDC cycle. This result indicated that the exhausted emissions and fuel consumption of vehicles obtained from tests under the legislative modal-type driving cycle (EDC) are significantly different from those actually produced under real traffic conditions especially during peak periods.     

多哈气候会议结果分析

本文总结和分析了多哈气候会议的谈判热点和成果,特别介绍涵盖2013至2020年的《京都议定书》第二承诺期的要点;展望了计划于2015年达成新的有法律效力的全面的国际气候协议。     

大气污染总量控制规划专家系统中知识库子系统的研究

论述了大气污染总量控制规划专家系统（ＥＡＳＰＴＥＣＥＰ）中知识库的基本设计思想,知识库分为无级知识库和领域级知识库,元级知识库由类文件和元规则文件构成,领域级知识库则文件和参量文件构成,并在此基础上阐述了ＥＳＡＰＴＥＣＰ中知识库演绎推理系统,知识库解释系统,知识库管理系统等的设计与实现方法。     

Energy and economic impacts of an international multi-regional carbon market

The establishment of a global multi-regional carbon market is considered to be a cost effective approach to facilitate global emission abatement and has been widely concerned.The ongoing planned linkage between the European Union’s carbon market and a new emission trading system in Australia in 2015 would be an important attempt to the practice of building up an international carbon market across different regions.To understand the abatement effect of such a global carbon market and to study its energy and economic impact on different market participants,this article adopts a global dynamic computable general equilibrium model with a detailed representation of the interactions between energy and economic systems.Our model includes 20 economic sectors and 19 regions,and describes in detail 17 energy technologies.Bundled with fossil fuel consumptions,the emission permits are considered to be essential inputs in each of the production and consumption activities in the economic system to simulate global carbon market policies.Carbon emission permits are endogenously set in the model,and can be traded between sectors and regions.Considering the current development of the global carbon market,this study takes 2020 as the study period.Four scenarios(reference scenario,independent carbon market scenario,Europe Union（EUh-Australia scenario,and China-EU-Australia scenario） are designed to evaluate the impact of the global carbon market involving China,the EU,and Australia.We find that the carbon price in the three countries varies a lot,from $32/tCO₂ in Australia,to $17.5/tCO₂ in the EU,and to $10/tCO₂ in China.Though the relative emission reduction（3%） in China is lower than that in the EU（9%） and Australia（18%）,the absolute emission reduction in China is far greater than that in the EU and Australia.When China is included in the carbon market,which already includes the EU and Australia,the prevailing global carbon price falls from $22 per ton carbon dioxide（CO₂） to $12/tCO₂,due to the relatively lower abatement cost in China.Seventy-one percent of the EU’s and eighty-one percent of Australia’s domestic reduction burden would be transferred to China,increasing 0.03%of the EU’s and 0.06%of Australia’s welfare.The emission constraint improves the energy efficiency of China’s industry sector by 1.4%,reduces coal consumption by3.3%,and increases clean energy by 3.5%.     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.     

基于卫星夜间灯光数据的中国分省碳排放时空模拟

中国能源统计数据"横向不可比,纵向不可加"现象依然突出,尤其是分省能源消费统计千差万别,给分省碳排放评估带来了较大困难,如何利用卫星遥感数据科学合理地估算中国分省碳排放是当前亟须研究的问题。本文运用DMSP/OLS全球稳定夜间灯光数据,在通过相互校正、年内融合和年际间校正等系列处理得到中国分省稳定夜间灯光数据的基础上,首先分别构建中国分省稳定夜间灯光亮度DN值与人均碳排放和单位面积碳排放之间的时空地理加权回归模型,两个模型整体效果均较好,拟合优度分别高达96.74%和99.24%;其次运用稳定夜间灯光亮度DN值对分省人均碳排放和单位面积碳排放进行时空模拟;最后运用人口规模和土地面积对分省碳排放进行估算。估算结果显示:(1)整体来看,2000—2013年年均碳排放模拟值与实际值6.3349×109t较为接近,两个模型的相对误差均在0.5%以内。(2)分年度来看,所有年份的相对误差均在5%以内,2006年分省加总碳排放模拟值与实际碳排放6.2036×109t最为接近,绝对误差和相对误差均较小,两个模型模拟值的相对误差均为0.04%。(3)分省域来看,2000—2013年年均碳排放模拟值与实际碳排放均非常接近,除海南和宁夏外,其余28个省区市的相对误差均在1%以内。(4)分年度分省域来看,以2013年为例,40%省份的相对误差在2%以内,70%省份的相对误差在5%以内。从整体、分年度、分省域、分年度分省域的估算结果来看,基于稳定夜间灯光数据的中国分省碳排放时空模拟效果良好。因此,运用卫星夜间灯光数据可以较为准确地对中国分省碳排放进行估算和预测,为卫星遥感影像数据服务分省碳排放监测和评估提供一种补充性参考。     

Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects

The construction process contributes to pollutant emissions, particularly through the operation of diesel- and gasoline-powered equipment. In the past decade, a series of investigations were undertaken to quantify these emissions for a variety of non-road construction equipment performing different activities and undergoing different duty cycles, and a model to estimate quantities of six types of pollutant was developed. This paper uses that model to estimate emissions for four street and utility construction projects which no one has done previously. We combined information from company records with standard construction industry manuals to estimate total emissions for the projects and to examine the pollution patterns and magnitudes. The street construction projects all had similar emission profiles with a large peak at the beginning and a steady output of emissions throughout the duration of the project. For example, in two of the projects studied, half of all CO₂ emissions were produced before the projects were 40% completed. Results showed that demolition and earthwork are the activities with the largest contribution. The equipment types with the largest contribution are backhoes, front-end loaders, bulldozers and trenchers. Trenchers, for example, produced 30% of all emissions on the projects on which they were used.     

A study on the factor market distortion and the carbon emission scale effect of two-way FDI

Based on the data of 30 Chinese provinces for the period from 2004 to 2015, this paper expounds the carbon emissions effect of two-way foreign direct investment (FDI) from the perspective of scale effect and factor market distortions. This study uses Kaya identity to decompose carbon emission and construct simultaneous equations model to empirically examine the factor market distortion and the carbon emission scale effect of two-way FDI. The results show that the inward foreign direct investment (IFDI) increase regional carbon emission through scale effect and also exacerbates factor market distortion in China, whereas the outward FDI trends reduce carbon emission and reduces factor market distortions in China. The study also shows that human capital, research and development (R&D), trade openness, and capital accumulation are important determinants of two-way FDI. Therefore, the study proposes that IFDI policies should focus on acquiring green technologies. In addition, the domestic enterprises should be encouraged to participate in global business.     

含外来电的崇明县能源碳排放核算研究

能源消耗是中国最主要的碳排放源,而地方政府是碳管理的基层行政单元,因此,有效控制区域的能源碳排放是碳减排工作的重中之重。区域消耗的能源中,外来电是缓解当地用电压力的重要措施,但一般外来电引起的碳排放易被忽视。将外来电导致的碳排放纳入区域能源碳排放核算体系内,利用部门分析和范围分析法建立了包含外来电分析的能源碳排放核算系统,以上海市崇明县为例进行了应用。研究表明：（1）2000～2009年崇明的能源碳排放增长较快,由181万t增至477万t（CO2当量）;(2）碳排放总量的8212%来自3个部门：工业、建筑业和生活部门;(3）2009年,购买电力导致的间接碳排放达2316%,体现了实施碳管理时考虑外来电力的必要性     

The Clean Development Mechanism and Sustainable Development in China''''s Electricity Sector

1 INTRODUCTIONEnergy and environmental issues in China have receivedsignificant attention in both the peer-reviewed literatureand in international energy and environmental policymaking in the last number of years. China's coal dominatedenergy consumption results in significant regional pollutionproblems, most notably acid rain that affects nearly 1/3rdof China's landmass and air pollution that plagues manyof its major cities. China now ranks as the top emitterof sulphur dioxide (SO2) pol…