某电厂600MW火电机组脱硫增容改造方案探讨

按照国家环保部文件要求，大唐集团河北某电厂600 MW机组湿法脱硫系统需进行增容改造。该电厂根据实际情况，归纳了3种可行的脱硫增容改造方案，即原吸收塔增加喷淋层和高度、双吸收塔串联、双吸收塔双循环，阐述了各自的技术特点，结合性能保证、工程投资、施工周期等影响因素，比较了各方案的优缺点。经过对比和论证，双吸收塔方案比单吸收塔方案更适合于本次工程改造。     

Combined influence of food level and inoculation density on competition between <Emphasis Type="Italic">Anuraeopsis fissa</Emphasis> and <Emphasis Type="Italic">Brachionus patulus</Emphasis> or <Emphasis Type="Italic">Brachionus macracanthus</Emphasis> (Rotifera: Brachionidae)

We tested separately the effect of two taxonomically related rotifers (B. patulus and B. macracanthus) on the population dynamics of another species (A. fissa) at low (0.5 ×10 ⁶) and high food levels (1.5 × 10⁶ cells/ml of Chlorella vulgaris) using different inoculation densities (0–100%). We also quantified the impact of A. fissa on the two brachionid species. Regardless of the presence of the competing species, an increase in the availability of food led to increase in the abundances of the three rotifers. The population growth of B. patulus, B. macracanthus, or A. fissa was affected negatively when cultured together with another species. An increase in the initial density of any one of the competing species became advantageous to maintain a certain population size. At a low algal food level, B. patulus was able to suppress A. fissa more strongly than B. macracanthus. On the other hand, at a high food level, B. macracanthus suppressed the population of A. fissa more strongly than B. patulus. Peak population densities for A. fissa varied from about 150 to 1000 ind./ml, depending on food density and the presence of competitors. The rate of population increase (r) of A. fissa, B. patulus, and B. macracanthus increased with an increase in food availability but decreased with increasing initial density of the competitor. Both Brachionus spp. experienced negative growth rates in the presence of A. fissa, especially at a high initial density of the latter. Published in Russian in Ekologiya, 2007, Vol. 38, No. 5, pp. 381–390. The article was submitted by the authors in English.     

冲击水浴喷雾式除尘器的应用

介绍了冲击水浴喷雾式除尘器在柳钢焦化厂的应用试验情况，制作安装，调试运行后检测鉴定表明，冲击水浴喷雾式除尘器应用在冶金焦末粉尘上，不但操作简单，维护方便，除尘效率高，效果好，而且成本低廉，只有电除尘器或布袋除尘器的20%左右。     

岷江上游崩塌滑坡分布规律研究

岷江为长江—级支流，上游长３３０ｋｍ，自１９８６年以来，发生崩塌滑坡２００余处，体积约２．１亿ｍ￣３。作者研究了岷江上游崩塌滑坡的分布规律。采用统计指标法，将岷江上游分为三种不同的崩塌滑坡分布密度区：①ＵＸＳ．高密度区；②ＭＸＳ，中密度区；③ＬＸＳ＿３低密度区。     

Pt-Sn/Al2O3蜂窝催化剂催化氧化C6烃

采用等体积分浸法制备Pt-Sn/Al₂O₃蜂窝催化剂（Pt含量仅为0.06wt%）.运用X射线衍射（XRD）、透射电镜（TEM）等技术对催化剂理化性质进行表征,并选取4种代表性C₆烃（苯、环己酮、环己烷和正己烷）对催化剂性能进行评价.活性评价试验中,Pt/Sn比为3/1催化效果最佳.此时4种C₆烃转化率达到90%的温度（T₉₀）较Pt催化剂均降低约20℃,其原因在于Sn可将Pt分割为较小的团簇提高Pt分散度.寿命评价试验以环己烷为例同Pt-Sn蜂窝催化剂连续运行720h,催化活性无明显变化,其原因在于,Sn可有效抑制其粒径增长;Pt₃Sn合金降低表面对C₆烃的吸附,减少催化剂表面积炭.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.     

大气沉降向华中丘陵区稻田输入硫通量的观测

选取我国华中丘陵区的湖南省长沙县一个典型水稻种植区,对2015与2016年2年雨水样中的SO₄²-S和大气SO₂的沉降量进行监测,分析雨水中SO₄^2-、NO₃^-的关系,解析大气硫沉降的主要来源.结果表明,研究区大气中SO₂-S和雨水中SO₄^2--S的年均浓度分别为8.5 μg/m³和1.1mg/L,大气硫沉降年均总量为26.8kgS/（hm²·a）,其中年均降雨混合沉降量18.2kgS/（hm²·a）,年均干沉降量为8.6kgS/（hm²·a）.研究区域硫素干、混合沉降量存在明显的季节差异,硫素混合沉降春季高于夏、秋、冬季,而硫素干沉降冬季高于春、夏、秋季.雨水中NO₃^-/SO₄^2-的质量比大多小于1,表明研究区大气硫素主要来自固定污染源（燃煤）.华中丘陵区稻田具有较高的硫沉降,但硫沉降量已较21世纪初出现了较大幅度下降,农业生产中需要根据农田硫素收支状况酌情补充硫肥来保证作物高产稳产.     

石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。     

水质中高浓度挥发酚的预测

提出一种以溴水预测法确定高浓度挥发酚稀释倍数 ,为高浓度水样提供了一种科学准确的操作分析方法。简单快速 ,并能确保高浓度挥发酚水样分析的可靠性与成功性 ,具有很大的应用和推广价值     

A Global Overview of Atmospheric Acid Deposition Fluxes

This paper presents a summary of globalacid deposition flux data taken from a globalassessment report on acid deposition prepared forUNEP/WMO (Whelpdale and Kaiser, 1996). There is a largevariation in the spacial coverage and reliability ofmonitoring around the world. Many more stationsmeasure wet deposition than collect appropriate datafor estimating dry deposition. The widespread regionswith highest precipitation concentrations anddeposition fluxes of sulphate and nitrate coincideclosely with the regions of highest density ofSO₂ and NO_x precursor emissions occurringprimarily in the mid-latitude, northern hemispherebelt where a large fraction of the worlds fossilfuels is consumed. Organic acids in precipitation makea minor contribution to acidity (<20%) inindustrial regions, but in the rest of the world theyare of same order, or even exceed, inorganic acids.Less is known about dry deposition, but it appears topredominate near strong emission sources with wetdeposition predominating farther downwind. The molarratio of the N/S contribution to acidic deposition isclose to 1.0 over large areas of Europe and NorthAmerica, but is highly variable elsewhere, beinghighest in equatorial regions due to biomass burningand lowest near smelters and other large sources of SO₂.