Phosphate recovery with granular acid-activated neutralized red mud: Fixed-bed column performance and breakthrough curve modelling

Granular acid-activated neutralized red mud (AaN-RM) has been successfully prepared with good chemical stability and physical strength. However, its potential for industrial application remains unknown. Therefore, the performance of granular AaN-RM for phosphate recovery in a fixed-bed column was investigated. The results demonstrated that the phosphate adsorption performance of granular AaN-RM in a fixed-bed column was affected by various operational parameters, such as the bed depth, flow rate, initial solution pH and initial phosphate concentration. With the optimal empty-bed contact time (EBCT) of 24.27 min, the number of processed bed volumes and the phosphate adsorption capacity reached 496.95 and 84.80 mg/g, respectively. Then, the saturated fixed-bed column could be effectively regenerated with a 0.5 mol/L HCl solution. The desorption efficiency remained as high as 83.45% with a low weight loss of 3.57% in the fifth regeneration cycle. In addition, breakthrough curve modelling showed that a 5-9-1 feed-forward artificial neural network (ANN) could be effectively applied for the optimization of the fixed-bed adsorption system; the coefficient of determination (R²) and the root mean square error (RMSE) evaluated on the validation-testing data were 0.9987 and 0.0183, respectively. Therefore, granular AaN-RM fixed-bed adsorption exhibits promising potential for phosphate removal and recovery from polluted water.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

流动注射法测定水中总碳酸盐

将流动注射应用于水中总碳酸盐的分析,并研究了各种实验条件对于结果的影响。实验证明,这种方法基本不存在干扰,在采样量为0.05ml时,检出限(3σ)为80mg/L;峰高的检测范围100~1000mg/L;峰宽的检测范围1000~5000mg/L,能够很好地应用于火力发电厂中生水、锅炉水的总碳酸盐测定。     

高压密封消解-流动注射同时测定海水中总氮和总磷

建立了高压密封消解-流动注射同时测定海水中总氮和总磷的方法,方法采用特制聚四氟乙烯密封消解罐,经高压消解锅消解后,用流动注射分析仪同时测定海水中的总氮和总磷。结果显示,总氮和总磷在0~3.20 mg/L范围内线性良好,总氮相关系数(r)=0.9997,检出限为0.012 mg/L,相对标准偏差为0.65%~2.59%,加标回收率为97.8%~102%;总磷相关系数(r)=0.9999,检出限为0.006 mg/L,相对标准偏差为0.50%~6.67%,加标回收率为98.8%~101%。该方法可同时测定海水中总氮和总磷,方法准确度和精密度良好,满足分析要求,适用于大批量海水样品中总氮和总磷的快速准确定量。     

CODMn重新稀释取样体积的推定

对原CODMn法测地表水二次取样体积进行了推导，建立了实际适用取样体积公式，具有一定的适用性。     

微波联合消解流动注射光度法测定水中总氮和总磷

利用微波联合消解水样,采用流动注射分析技术,建立了在线测定水中总氮和总磷的快速分析方法.优化了试验条件,在线性范围内,总氮和总磷的工作曲线线性关系良好,检出限分别为0.03 mg/L和0.01 mg/L,相对标准偏差分别为1.5%和1.2%,加标回收率分别为96.7%～103%和98.8%～102%.     

流动注射在线氢化物发生—原子荧光光谱法测定环境水样中痕量无机汞和有机汞

提出了一种流动注射在线氢化物发生—原子荧光光谱法测定水样中痕量无机汞和有机汞的分析方法。以溴化剂作为有机汞的消解剂 ,在有、无溴化剂的存在下 ,采用流动注射在线氢化物发生—原子荧光光谱法分别测定总汞和无机汞 ,差减法求出有机汞的含量。方法操作简便快速 ,灵敏度高 ,干扰少 ,经加标回收实验验证 ,回收率达 95 %～ 10 5 %。     

模拟在役井注减氧空气对1Cr-L80井筒管材防腐研究

目的在充分调研陆上及渤海周边相似油气田注气开发井筒腐蚀情况的基础上,明确注减氧空气开发井对井筒全寿命周期管材腐蚀速率大小。方法系统性开展注气井不同含氧量条件下的动态腐蚀实验研究,并对生产井动态腐蚀进行评价,深入分析减氧空气对油井管腐蚀行为,分类分层次分析归纳注减氧空气工况管柱腐蚀特性、腐蚀速率影响因素以及管柱腐蚀风险。结果得出在注气井井口、井中、井底工况,不同氧气浓度下,1Cr-L80管材在注气井井口、井中、井底的腐蚀关系曲线。在含氧量为5%(质量分数)的注气井井口、井中、井底,1Cr-L80的腐蚀速度分别为0.345、0.2147、0.1158mm/a;在含氧量为21%的注气井井口、井中、井底,1Cr-L80的腐蚀速率分别为0.7399、1.2854、2.4506 mm/a。结论1Cr-L80材质腐蚀速率均保持在较高水平,老井直接注入空气会存在高腐蚀风险。     

Effects of acid deposition on forests in south China

１ＩｎｔｒｏｄｕｃｔｉｏｎＷｉｔｈｔｈｅｆａｓｔｇｒｏｗｉｎｇｏｆｍｏｄｅｒｎｉｎｄｕｓｔｒｙａｎｄｓｈａｒｐｌｙｉｎｃｒｅａｓｉｎｇｏｆｅｎｅｒｇｙｃｏｎｓｕｍｐｔｉｏｎｐｒｉｍａｒｉｌｙｃｏａｌ，ａｉｒｐｏｌｕｔｉｏｎａｎｄａｃｉｄｄｅｐｏｓｉｔ...     

大直径TA2卷焊坯制备工艺

此文介绍尺寸为φ1547×L900×δ30的大直径TA2卷焊坯的制备工艺。主要包括卷焊坯设计、展开下料的计算、卷圆工艺、焊接工艺等,可供同类材质圆筒件卷圆时参考。