The impact of point source pollution on shallow groundwater used for human consumption in a threshold country

Many developing and threshold countries rely on shallow groundwater wells for their water supply whilst pit latrines are used for sanitation. We employed a unified strategy involving satellite images and environmental monitoring of 16 physico-chemical and microbiological water quality parameters to identify significant land uses that can lead to unacceptable deterioration of source water, in a region with a subtropical climate and seasonally restricted torrential rainfall in Northern Argentina. Agricultural and non-agricultural sources of nitrate were illustrated in satellite images and used to assess the organic load discharged. The estimated human organic load per year was 28.5 BOD(5) tons and the N load was 7.5 tons, while for poultry farms it was 9940-BOD(5) tons and 1037-N tons, respectively. Concentrations of nitrates and organics were significantly different between seasons in well water (p values of 0.026 and 0.039, respectively). The onset of the wet season had an extraordinarily negative impact on well water due in part to the high permeability of soils made up of fine gravels and coarse sand. Discriminant analysis showed that land uses had a pronounced seasonal influence on nitrates and introduced additional microbial contamination, causing nitrification and denitrification in shallow groundwater. P-well was highly impacted by a poultry farm while S-well was affected by anthropogenic pollution and background load, as revealed by Principal Component Analysis. The application of microbial source tracking techniques is recommended to corroborate local sources of human versus animal origin.     

Radiocarbon dating of archaeological samples (sambaqui) using CO(2) absorption and liquid scintillation spectrometry of low background radiation

Sambaqui means, in the Tupi language, a hill of shells. The sambaquis are archaeological sites with remains of pre-historical Brazilian occupation. Since the sambaqui sites in the Rio de Janeiro state region are older than 10,000 years, the applicability of CO(2) absorption on Carbo-sorb and (14)C determination by counting on a low background liquid scintillation counter was tested. In the present work, sambaqui shells were treated with H(3)PO(4) in a closed vessel in order to generate CO(2). The produced CO(2) was absorbed on Carbo-sorb. On saturation about 0.6g of carbon, as CO(2), was mixed with commercial liquid scintillation cocktail (Permafluor), and the (14)C activity determined by counting on a low background counter, Packard Tricarb 3170 TR/SL, for a period of 1000 mins to enable detection of a radiocarbon age of 22,400 BP. But only samples with ages up to 3500 BP were submitted to the method because the samples had been collected in the municipality of Guapimirim, in archaeological sambaqui-type sites belonging to this age range. The same samples were sent to the (14)C Laboratory of the Centro de Energia Nuclear na Agricultura (CENA/USP) where similar results were obtained.     

Life cycle assessment of a packaging waste recycling system in Portugal

Life Cycle Assessment (LCA) has been used to assess the environmental impacts associated with an activity or product life cycle. It has also been applied to assess the environmental performance related to waste management activities. This study analyses the packaging waste management system of a local public authority in Portugal. The operations of selective and refuse collection, sorting, recycling, landfilling and incineration of packaging waste were considered. The packaging waste management system in operation in 2010, which we called “Baseline” scenario, was compared with two hypothetical scenarios where all the packaging waste that was selectively collected in 2010 would undergo the refuse collection system and would be sent directly to incineration (called “Incineration” scenario) or to landfill (“Landfill” scenario). Overall, the results show that the “Baseline” scenario is more environmentally sound than the hypothetical scenarios.     

Environmental impacts caused by cemeteries and crematoria,new funeral technologies,and preferences of the Northeastern and Southern Brazilian population as for the funeral process

Cemeteries and crematoria are the main funeral ways used in the world nowadays. It is a little-studied segment in the present days, mainly as for the possible environmental impacts in the environment, such as those derived from dental amalgam, prostheses, and dioxins, among other. This article aimed to identify the environmental impacts caused by cemeteries and crematoria and to point out new trends in funeral processes such as freeze-drying and alkaline hydrolysis. The study is justified due to the large part of the Brazilian population that do not know the environmental impacts caused by cemeteries and crematoria, as well as to bring information about the new processes. For that, a research was carried out with 400 people. The main results show that among all the funeral processes, the new freeze-drying process was opted by 33% of the sample. We also identified that the main reasons for choosing the funeral process were less environmental impact (28%), no after-death expenses (grave payment) (16.1%), and the possibility of putting away or throwing away the remains wherever you want (14.9%). Finally, new funeral processes were well accepted by the Brazilian population—those who were interviewed—due to their benefits.     

Techno-economic-environmental characteristics of polyurethane composite to thermal insulation for building with flame resistance: corroborative effect recycled of PVC and aluminum oxide

Journal of Material Cycles and Waste Management - In this article, we present the results of the composite development obtained from polyurethane (PU), polyvinyl chloride (PVC), and aluminum...     

The Role of Residual Contaminants and Recycling Steps on Rheological Properties of Recycled Polypropylene

Journal of Polymers and the Environment - Recycling of polymers is one of the alternatives to reduce the impact of polymers presence on the environmental. However, the contaminants, defined as...     

Estimation of the critical effect level for pollution prevention based on oyster embryonic development toxicity test: the search for reliability

In spite of the consideration that toxicity testing is a reduced approach to measure the effects of pollutants on ecosystems, the early-life-stage (ELS) tests have evident ecological relevance because they reflect the possible reproductive impairment of the natural populations. The procedure and validation of Crassostrea rhizophorae embryonic development test have shown that it meets the same precision as other U.S. EPA tests, where EC(50) is generally used as a toxicological endpoint. However, the recognition that EC(50) is not the best endpoint to assess contaminant effects led U.S. EPA to recently suggest EC(25) as an alternative to estimate xenobiotic effects for pollution prevention. To provide reliability to the toxicological test results on C. rhizophorae embryos, the present work aimed to establish the critical effect level for this test organism, based on its reaction to reference toxicants, by using the statistical method proposed by Norberg-King (Inhibition Concentration, version 2.0). Oyster embryos were exposed to graded series of reference toxicants (ZnSO(4) x 7H(2)O; AgNO(3); KCl; CdCl(2)H(2)O; phenol, 4-chlorophenol and dodecyl sodium sulphate). Based on the obtained results, the critical value for C. rhizophorae embryonic development test was estimated as EC(15). The present research enhances the emerging consensus that ELS tests data would be adequate for estimating the chronic safe concentrations of pollutants in the receiving waters. Based on recommended criteria and on the results of the present research, zinc sulphate and 4-chlorophenol have been pointed out, among the inorganic and organic compounds tested, as the best reference toxicants for C. rhizophorae ELS-test.     

Kinetic and morphology study of alginate-vineyard pruning waste biocomposite vs. non modified vineyard pruning waste for dye removal

In this work a comparative bioadsorption study between a biocomposite consisting of hydrolysed vineyard pruning waste entrapped in calcium alginate spheres and non entrapped vineyard residue was carried out.Results have demonstrated that the biocomposite based on lignocellulose-calcium alginate spheres removed 77.3% of dyes,while non entrapped lignocellulose eliminated only removed 27.8% of colour compounds.The experimental data were fitted to several kinetic models(pseudo-first order,pseudo-second order,Chien–Clayton model,intraparticle diffusion model and Bangham model); being pseudo-second order the kinetic model that better described the adsorption of dyes onto both bioadsorbents.In addition,a morphological study(roughness and shape) of alginate-vineyard biocomposite was established under extreme conditions,observing significant differences between hydrated and dehydrated alginate-vineyard biocomposite.The techniques used to carry out this morphological study consisted of scanning electron microscopy(SEM),perfilometry and 3D surface analysis.