Aerosol organic nitrogen over the remote Atlantic Ocean

Water soluble organic nitrogen (WSON) has been measured in aerosols collected on three research cruises on the Atlantic Ocean from approximately 55°N to 45°S. Results are interpreted using air mass back trajectories and results for other aerosol components. WSON concentrations range from <1 to ～40 (median 5.6) nmol m^?3 with significant WSON concentrations in both fine (<1 μm) and coarse mode (>1 μm) aerosol. Concentrations of WSON were highest in samples containing Saharan dust, suggesting a locally significant source associated with soil dust. More generally WSON concentrations were highest in air which had recently crossed continental areas. In the whole data set, WSON is well correlated to total soluble nitrogen and represents approximately 25% of total nitrogen. This correlation implies a significant anthropogenic contribution to the organic nitrogen.     

Determination of vapor pressure-temperature relationships of current–use pesticides and transformation products

Sub-cooled liquid vapor pressures (P_L ⁰) of current–use organochlorine and organophosphate pesticides (chlorothalonil, chlorpyrifos methyl, diazinon, fipronil) and selected transformation products (chlorpyrifos oxon, heptachlor epoxide, oxychlordane, 3,5,6-trichloro-2-pyridinol) were determined at multiple temperatures using the gas chromatography retention time technique. Results were utilized to determine vapor pressure-temperature relationships and to calculate enthalpies of vaporization (ΔH_vap). While results for chlorothalonil and diazinon were comparable with published values, the measured value for fipronil (1.82 × 10^{? 6} Pa) is almost an order of magnitude higher than the reported literature value (3.7 × 10^{? 7} Pa). The availability of vapor pressure temperature relationships for these chemicals will aid in pesticide risk assessment development and improve the effectiveness of mitigation and remediation efforts.     

Arsenic and copper stabilisation in a contaminated soil by coal fly ash and green waste compost

In situ metal stabilisation by amendments has been demonstrated as an appealing low-cost remediation strategy for contaminated soil. This study investigated the short-term leaching behaviour and long-term stability of As and Cu in soil amended with coal fly ash and/or green waste compost. Locally abundant inorganic (limestone and bentonite) and carbonaceous (lignite) resources were also studied for comparison. Column leaching experiments revealed that coal fly ash outperformed limestone and bentonite amendments for As stabilisation. It also maintained the As stability under continuous leaching of acidic solution, which was potentially attributed to high-affinity adsorption, co-precipitation, and pozzolanic reaction of coal fly ash. However, Cu leaching in the column experiments could not be mitigated by any of these inorganic amendments, suggesting the need for co-addition of carbonaceous materials that provides strong chelation with oxygen-containing functional groups for Cu stabilisation. Green waste compost suppressed the Cu leaching more effectively than lignite due to the difference in chemical composition and dissolved organic matter. After 9-month soil incubation, coal fly ash was able to minimise the concentrations of As and Cu in the soil solution without the addition of carbonaceous materials. Nevertheless, leachability tests suggested that the provision of green waste compost and lignite augmented the simultaneous reduction of As and Cu leachability in a fairly aggressive leaching environment. These results highlight the importance of assessing stability and remobilisation of sequestered metals under varying environmental conditions for ensuring a plausible and enduring soil stabilisation.     

Achieving attainable outcomes from good science in an untidy world: case studies in land and air pollution

While scientific understanding of environmental issues develops through careful observation, experiment and modelling, the application of such advances in the day to day world is much less clean and tidy. Merseyside in northwest England has an industrial heritage from the earliest days of the industrial revolution. Indeed, the chemical industry was borne here. Land contamination issues are rife, as are problems with air quality. Through the examination of one case study for each topic, the practicalities of applied science are explored. An integrated, multidisciplinary response to pollution needs more than a scientific risk assessment. The needs of the various groups (from public to government) involved in the situations must be considered, as well as wider, relevant contexts (from history to European legislation), before a truly integrated response can be generated. However, no such situation exists in isolation and the introduction of environmental investigations and the exploration of suitable, integrated responses will alter the situation in unexpected ways, which must be considered carefully and incorporated in a rolling fashion to enable solutions to continue to be applicable and relevant to the problem being faced. This integrated approach has been tested over many years in Merseyside and found to be a robust approach to ever-changing problems that are well described by the management term, “wicked problems”.     

Mesoporous carbon adsorbents from melamine–formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), elemental (CHN) analysis, Fourier transform infrared (FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO₂ capture. The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO₂ adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO₂ adsorption capacity among the synthesized adsorbents. Breakthrough time and CO₂ equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO₂ system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

When does nitrate become a risk for humans?

Is nitrate harmful to humans? Are the current limits for nitrate concentration in drinking water justified by science? There is substantial disagreement among scientists over the interpretation of evidence on the issue. There are two main health issues: the linkage between nitrate and (i) infant methaemoglobinaemia, also known as blue baby syndrome, and (ii) cancers of the digestive tract. The evidence for nitrate as a cause of these serious diseases remains controversial. On one hand there is evidence that shows there is no clear association between nitrate in drinking water and the two main health issues with which it has been linked, and there is even evidence emerging of a possible benefit of nitrate in cardiovascular health. There is also evidence of nitrate intake giving protection against infections such as gastroenteritis. Some scientists suggest that there is sufficient evidence for increasing the permitted concentration of nitrate in drinking water without increasing risks to human health. However, subgroups within a population may be more susceptible than others to the adverse health effects of nitrate. Moreover, individuals with increased rates of endogenous formation of carcinogenic N-nitroso compounds are likely to be susceptible to the development of cancers in the digestive system. Given the lack of consensus, there is an urgent need for a comprehensive, independent study to determine whether the current nitrate limit for drinking water is scientifically justified or whether it could safely be raised.     

Chemical (polycyclic aromatic hydrocarbon and heavy metal) levels in contaminated stormwater and sediments from a motorway dry detention pond drainage system

Chemical (polycyclic aromatic hydrocarbon - PAH and heavy metal) levels in stormwater and sediment samples collected from the London Orbital (M25) motorway drainage dry detention pond at Oxted, Surrey, UK were determined. Such chemicals are derived from vehicular combustion products and the wear and tear materials deposited onto the motorway surface. Gas chromatography-mass spectrometry (GC-MS) was used for the qualitative and quantitative determination of 16 USEPA priority PAHs in motorway drainage sediments. The GC-MS method, incorporating a solid phase extraction step, provides detection limits ranging from 0.17 to 0.41 mg kg(-1)(dry weight). Almost all of the 16 USEPA listed PAHs were detected. Phenanthrene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene (PAH numbers 5, 7, 8, 9, 10, 11, 13 and 16) were among the PAHs found at "higher" levels (ranging from 0.3-10.2 mg kg(-1), dry weight) in the sediment samples. PAH levels show little change along the motorway drainage silt trap (facility for reducing the levels of suspended particulate matter in the stormwater). PAH concentrations are considerably higher in the dry detention pond outflow interceptor. Statistical analysis showed that significant correlation coefficients (based on a t-test at the 95% confidence interval) were obtained between those PAHs found at high concentrations over all of the sampling sites. Several PAHs were dispersed beyond the treatment facility and accumulation in the sediment of the deer park resulted in levels ranging from 0.3-1.6 mg kg(-1), dry weight. These PAHs found beyond the treatment facility (in the local farm deer park) may contribute a serious health threat to farm animals or even fish in the aquatic environment. Heavy metal levels (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Sb and Pb) of the drainage stormwater and sediments were determined by inductively coupled plasma mass spectrometry (ICP-MS), with quality control evaluation using two certified reference materials. Typical detection limits were found to be below 0.1 [micro sign]g l(-1) for stormwater and 0.005 mg kg(-1) for acid digested sediments. Raised heavy metal levels were found throughout the dry detention pond facility and only decrease when the stormwater is diluted following discharge into the river Eden. Statistical analysis also confirms that some significant correlations exist between various heavy metals and PAHs. However, no overall conclusive trend is found indicating that a particular PAH is deposited in sediment relative to a specific heavy metal/s. These results raise some serious concerns about the dispersion and accumulation of chemicals in the sediments of motorway stormwater drainage systems and the need for maintenance and clean-up of contaminated material from such systems.     

Biomonitoring of Lead in Atmospheric Environment of An Urban Center of the Ganga Plain, India

Monitoring of atmospheric lead from the Dalbergia sissoo treewas undertaken at Lucknow urban centre of the Ganga Plain, India.Atotal of 26 leaf samples were collected in spring, monsoon and winter seasons from 16 sampling sites and was analysed by Atomic Absorption Spectrophotometry method. Lead concentrations were low in spring season, increased in monsoon to winter seasons and range from 2.1 to 28.2 μg/g (dry wt.). This accumulative response of lead in the tree leaves is directly linked with the exposure time of automobile emission that is considered to be the predominant source for it. Highway localities show higher lead concentrations by a factor of 2 as compared to urban localities. Highest concentration was recorded at Sitapur Road (National Highway No. 24) in winter season. A linear quantitative relationship between urban air-lead levels and lead-in-the Dalbergia sissoo leaves is used to infer the qualitative assessment of present day atmospheric lead pollution. Reported results suggest a drastic reduction in mean lead concentration in Lucknow urban air from 1.32μg/m3 in 1994 to 0.19μg/m3 in 2002. Similarly, mean lead concentration in the tree leaves during winter season also dropped from 17.9 μg/g in 1994 to 8.1 μg/g in 2004. Despite of increasing urban population, urban area, vehicle population and traffic density, the introduction of unleaded-petrol (vehicular fuel) keeps lead level in the urban environment of Lucknow much lower than the past. Like Lucknow, other urban centres of the Ganga Plain are also on way to the exponential increase in pressure of urbanization. An appropriate urban public transport planning is required to provide healthy atmospheric environment for millions of people especially future young generation.