A sulfur removal and disposal process through H2S adsorption and regeneration: Ammonia leaching regeneration

An iron oxide solid sponge H₂S adsorbent works by reacting H₂S and turning ferric oxide into ferric sulfide. The ferric sulfide will be converted back into ferric oxide and elemental sulfur when contacting oxygen or air. This study investigates the leaching of elemental sulfur from the solid sponge using anhydrous liquid ammonia as solvent. The leaching treatment expectedly results in effective regeneration of the adsorbent, which is able to lead to a sulfur removal and recovery process suitable for handling the small and mid-sized sulfur production cases, i.e., those less than 10 ton/day sulfur. The leaching does not significantly impair the physical properties, including the adsorbent pellet strength. The adsorption–regeneration (or leaching) cycle could be repeated at least three times. The cumulative sulfur loading can achieve as high as 50% (w/w), three times greater than that in the one-time use. The wash-off in leaching and the spent adsorbent can be made into slurry that is to be injected into underground formations such as depleted oil wells. It is anticipated that this underground injection is safer and more efficient than acid gas injection.     

应用环境应力分类的加速贮存退化试验评估方法

目的解决加速试验在估计产品贮存寿命中误差较大、未考虑结合实际贮存中的退化信息等问题。方法基于加速退化试验中广泛接受的基本假设,并将其应用到实际贮存中,把加速试验与实际贮存中的信息综合起来进行处理。结果得出了一种使用实际贮存信息修正试验预计结果、估计剩余寿命的方法。结论应用该方法在贮存过程中只需对少量性能参数进行测量,即可估计产品的剩余寿命。     

雷电电磁脉冲的效应试验及其防护措施

基于雷电电磁脉冲主要通过浪涌传导及电磁脉冲场辐射耦合两种方式对设备产生影响,分别从这两个方面设计了两个效应试验。效应试验结果表明雷电电磁脉冲的危害不容忽视,并简要说明了对雷电电磁脉冲的防护措施。     

静电在火工品生产中的危害及防护

在火工品生产中,静电是造成安全事故频发的重要原因,因此火工品生产和管理中的安全工作是各单位监管的重点。文中阐述了静电对火工品的危害,确定了火工品生产过程中的最大允许电压（即最大安全电压）,从工艺方面提出了几种静电防护方法。     

Physical and chemical characteristics of waste activated sludge treated with electric field

This study investigates the physical and chemical characteristics of sludge treated with controlled levels of electric field. The results indicated that the potential gradient and contact time strongly influenced the physical and chemical characteristics of sludge. Based on the settling velocity measurements, a potential gradient of 6 V/cm with a treatment time of 10 min is recommended as an optimal condition for improving sludge settling. For sludge disintegration, applying a higher potential gradient and a longer treatment time to the sludge are more efficient than applying lower levels. The results of the experiments presented here show that an electric field not only disintegrates sludge and destroys microbial cells but also removes and solubilizes organic substances. Possible mechanisms of electric field treatment are also discussed.     

Application of Markov-chain model for vegetation restoration assessment at landslide areas caused by a catastrophic earthquake in Central Taiwan

The 921 earthquake caused a catastrophic disaster in Central Taiwan. Ten years have passed since the earthquake occurred. Vegetation succession is the basis for establishing a restoration reference which plays an important role in vegetation restoration at landslide sites. Generally, growth conditions for grass are easier and the growth rate is faster than that for trees. Therefore, grass can be considered a pioneer species or an important reference for the early vegetation succession stage. This is the reason why grass is required to be extracted from other land covers. Integrating remote sensing, geographic information system and image classification into vegetation succession models is very important. In this study, the Markov chain model was applied for vegetation restoration assessment and discussion. Chiufenershan and Ninety-nine peaks were selected as the study areas. Five SPOT satellite images are used for land cover mapping and vegetation restoration simulations. Four categories of land covers were extracted, including forest, grass, bare land and water, respectively. From the transitive probability matrix (derived from any two land covers), the results show that vegetation restoration at the Chiufenershan and Ninety-nine peaks landslide areas is ongoing, but that has been disturbed by natural disasters.     

西安泾河夏季黑碳气溶胶及其吸收特性的观测研究

为研究西安泾河夏季黑碳气溶胶及其吸收特性,利用2011年夏季西安远郊泾河大气成分站观测的黑碳气溶胶浓度、颗粒物质量浓度、探空资料、地面气象资料,计算边界层顶高度、气溶胶吸收系数、大气消光系数,导出单次散射反照率,并对其进行分析讨论.结果表明:西安夏季黑碳气溶胶浓度为6.07μg/m3;黑碳气溶胶占颗粒物质量浓度PM1.0比值为21.9%,黑碳气溶胶与颗粒物质量浓度PM1.0、PM2.5、PM10相关系数分别为0.69、0.85、0.91;黑碳气溶胶浓度受城市边界层顶高度影响,风向、风速对泾河黑碳气溶胶的堆积输送有不同作用;气溶胶吸收系数和大气消光系数日变化显著,气溶胶吸收系数占大气消光系数比值范围在12%~30%;季单次散射反照率平均值为0.76,变化范围在0.70~0.84.     

石英砾石碱溶蚀法研制高纯石英砂

本文研究了石英砾石中铝、铁等杂质分布特征,讨论了选择性研磨、碱溶蚀等方法对石英砾石中铝等杂质的分离清除作用,提高了石英砂的品质,使得东海丰富的石英砾石可应用于电光源石英玻璃管的生产。     

控释氮肥减量配施对土壤氨挥发和N2 O排放的影响

施用控释氮肥是提高氮素利用效率、减少氮素损失的重要途径.为研究聚合物包膜氮肥与普通尿素配比减量施用对旱作棕壤氨挥发和N₂O排放的影响,利用15N同位素标记技术,通过5个不同氮肥施用量处理,分析施肥后土壤的氨挥发和N₂O排放规律以及玉米的当季氮肥利用率.结果表明:①土壤氨挥发主要出现在施肥后的前2周,普通尿素氨挥发速率最大可达4.04 kg/（hm2·d）,最大值出现在施肥后第7天,施用配比包膜氮肥氨挥发峰值出现时间比普通尿素延迟2 d,且氨挥发总量明显降低,为2.15 kg/（hm2·d）.②对于各处理下的氨挥发总量,无氮处理（CK）为3.69 kg/hm2,常规尿素处理（NU）为18.64 kg/hm2,配比控释氮肥处理（PU1）为9.39 kg/hm2,减量配比控释氮肥处理（PU2）为6.44 kg/hm2,再减量配比控释氮肥处理（PU3）为5.02 kg/hm2.③N₂O排放规律呈现先平稳后升高的趋势,较高的N₂O排放通量集中在施肥后的55~91 d之间.N₂O排放峰值最高的是常规尿素处理,在施肥后第79天出现,达到0.299 mg/（m2·h）,施用配比包膜氮肥N₂O排放峰值均低于常规尿素处理.④施用配比包膜氮肥玉米产量高于普通尿素处理,减量配比包膜氮肥不会降低玉米产量.⑤土壤氨挥发总量与施氮量呈显著正相关.施用配比包膜氮肥相比于普通尿素可显著减少土壤氨挥发,减量配施氮肥相比于全量施肥可显著减少土壤氨挥发.因此,施用配比包膜氮肥,可在保证粮食产量的前提下减少氮肥投入,降低氮肥的气态损失,从而降低环境风险.