A Comparison of Protocols and Observer Precision for Measuring Physical Stream Attributes1

Abstract: Stream monitoring programs commonly measure physical attributes to assess the effect of land management on stream habitat. Variability associated with the measurement of these attributes has been linked to a number of factors, but few studies have evaluated variability due to differences in protocols. We compared six protocols, five used by the U.S. Department of Agriculture Forest Service and one by the U.S. Environmental Protection Agency, on six streams in Oregon and Idaho to determine whether differences in protocol affect values for 10 physical stream attributes. Results from Oregon and Idaho were combined for groups participating in both states, with significant differences in attribute means for 9 out of the 10 stream attributes. Significant differences occurred in 5 of 10 in Idaho, and 10 of 10 in Oregon. Coefficients of variation, signal‐to‐noise ratio, and root mean square error were used to evaluate measurement precision. There were differences among protocols for all attributes when states were analyzed separately and as a combined dataset. Measurement differences were influenced by choice of instruments, measurement method, measurement location, attribute definitions, and training approach. Comparison of data gathered by observers using different protocols will be difficult unless a core set of protocols for commonly measured stream attributes can be standardized among monitoring programs.     

Worker training and education in occupational safety and health: A report on practice in six industrialized western nations : Part four of a four-part series

During 1980–1981, a study was conducted of worker training and education in occupational safety and health in Canada, Great Britain, Sweden, France, the Federal Republic of Germany, and the United States. This article is the fourth in a four-part series of the findings of this study. Part one discussed the genesis of the study and the study design, reported on the training requirements of the occupational safety and health legislation in each of the six countries, and considered the implications of this legislation for worker training and education. Part one also included information on how each country is organized to carry out worker training and education in occupational safety and health. Part two discussed the role perceived for worker training and education as an occupational injury and illness countermeasure and identified and described the major components of the occupational safety and health training infrastructure in each country in the study. Part three reported on strategies for worker training including course design, construction, delivery, evaluation, and costs. Part four provides synopses of worker training and education for selected subsets of the worker population, e.g., migrant workers, nonorganized workers, employees of small business establishments, and employees of the federal or central government. Worker training and education programs are discussed for the following industries: construction, marine cargo handling (longshoring), and petroleum refining and related industries.     

Worker training and education in occupational safety and health: A report on practice in six industrialized western nations : Part three of a four-part series

During 1980–1981, a study was conducted of worker training and education in occupational safety and health in Canada, Great Britain, Sweden, France, the Federal Republic of Germany, and the United States. This article is the third in a four-part series of the findings of this study. Part one discussed the genesis of the study and the study design, reported on the training requirements of the occupational safety and health legislation in each of the six countries, and considered the implications of this legislation for worker training and education. Part one also included information on how each country is organized to carry out worker training and education in occupational safety and health. Part two discussed the role perceived for worker training and education as an occupational injury and illness countermeasure and identified and described the major components of the occupational safety and health training infrastructure in each country in the study. Part three reports on strategies for worker training including course design, construction, delivery, evaluation, and costs. Part four will provide synopses of worker training and education for selected subsets of the worker population, e.g., migrant workers, nonorganized workers, employees of small business establishments, and employees of the federal or central government. Worker training and education programs will also be discussed for the following industries: construction, marine cargo handling (longshoring), and petroleum refining and related industries.     

Geographical distribution of organochlorine contaminants and reproductive parameters in Herring Gulls on Lake Superior in 1983

As part of the Great Lakes International Surveillance Plan, 1978–83, egg contaminant levels and reproductive output were determined for Herring Gull colonies on Lake Superior in 1983. Since 1974, the Herring Gull has been widely used in the Great Lakes as a spatial and temporal monitor of organochlorine (OC) contaminant levels and associated biological effects. Most eggs contained a wide range of OCs, the main compounds being DDE, polychlorinated biphenyls (PCBs), dieldrin, heptachlor epoxide, oxychlordane, hexachlorobenzene and mirex. Levels of an additional ten OCs and five polychlorinated dibenzo-p-dioxin (PCDD) congeners were also determined for some sites. Overall, levels varied significantly among colonies, but there was no obvious relationship to spatial distribution of contaminants in sediments or fish species. OC levels in eggs had declined by up to 84% since 1974. Eggshells were only 8% thinner than before the introduction of DDT, and shell thinning was not a cause of breeding failure. Average reproductive output varied from 0.15 to 1.57 young per apparently occupied nest in 1983: at 56% of colonies the value was below that thought necessary to maintain stable populations. The main causes of failure were egg disappearence and cannibalism of chicks. Despite this, the population appeared to have been increasing at about 4% per annum. Reduced availability of forage fish during the early 1980s was the most likely reason for the poor reproductive output in 1983.     

Centrifugal Bioreactors and Their Application in Remediation

A new approach to the maintenance of large microbial populations for bioremediation purposes has been developed in which a centrifugal bioreactor is used to immobilize microbial populations at extremely high density. The cells are ordered into a three‐dimensional array through which wastewater or groundwater volumes may be flowed, unimpeded by frits or screens. The process methodology is independent of the type, shape, or viability of the individual cells immobilized and, thus, may be adapted to many different bioremediation needs. The utilization of this new process has been explored for three different types of remediation: the removal of heavy metals from wastewater, the aerobic degradation of methyl‐tert‐butyl ether (MTBE), and the anaerobic reduction of nitrate to nitrogen gas. This article discusses the use of centrifugal bioreactors and their application in remediation. © 2001 John Wiley & Sons, Inc.     

Land use change effects on forest carbon cycling throughout the southern United States

We modeled the effects of afforestation and deforestation on carbon cycling in forest floor and soil from 1900 to 2050 throughout 13 states in the southern United States. The model uses historical data on gross (two-way) transitions between forest, pasture, plowed agriculture, and urban lands along with equations describing changes in carbon over many decades for each type of land use change. Use of gross rather than net land use transition data is important because afforestation causes a gradual gain in carbon stocks for many decades, while deforestation causes a much more rapid loss in carbon stocks. In the South-Central region (Texas to Kentucky) land use changes caused a net emission of carbon before the 1980s, followed by a net sequestration of carbon subsequently. In the Southeast region (Florida to Virginia), there was net emission of carbon until the 1940s, again followed by net sequestration of carbon. These results could improve greenhouse gas inventories produced to meet reporting requirements under the United Nations Framework Convention on Climate Change. Specifically, from 1990 to 2004 for the entire 13-state study area, afforestation caused sequestration of 88 Tg C, and deforestation caused emission of 49 Tg C. However, the net effect of land use change on carbon stocks in soil and forest floor from 1990 to 2004 was about sixfold smaller than the net change in carbon stocks in trees on all forestland. Thus land use change effects and forest carbon cycling during this period are dominated by changes in tree carbon stocks.     

Evaluating the effects of foraging habitat restoration on shorebird reproduction: the importance of performance criteria and comparative design

Coastal development and engineering projects preclude ecosystem processes that provide habitat for beach nesting birds. Management for coastal species may depend on actions that attempt to restore important habitat features and mitigate disturbance effects. However, species response to restoration or other management actions may be difficult to predict or measure. At Jones Beach State Park, on Long Island, New York, a 0.49 ha restoration project provided moist substrate foraging habitat for breeding Piping Plovers (Charadrius melodus) from 2002 to 2005. We examined whether foraging habitat restoration affected Piping Plover breeding population size, productivity, and fledgling production within 300 m of the restoration site. We found a positive relationship between habitat restoration and the number of fledglings produced per year. However, foraging habitat restoration did not significantly increase the number of Plover pairs breeding at Jones Beach. Our ability to evaluate restoration effects on Plovers depended on: 1) use of multiple performance criteria; 2) a design that allowed comparison of pre- and post-restoration data; and 3) a spatial control that allowed comparison of similar areas that were near and far from the restoration site. Despite the small size of the restoration project, there were measurable benefits to Plovers, indicating that foraging habitat restoration may be an effective tool for species recovery.     

Sequential sorption of lead and cadmium in three tropical soils

It is important to examine mechanisms of Pb and Cd sorption in soils to understand their bioavailability. The ability of three tropical soils to retain Pb, Cd, and Ca was evaluated. The objectives of this study were to (1) determine the extent to which soil sorption sites are metal specific, (2) investigate the nature of reactions between metals and soil surfaces, and (3) identify how metals compete for sorption sites when they are introduced to soils sequentially or concurrently. Lead was shown to be much less exchangeable than Cd and inhibited Cd sorption. Cadmium had little effect on Pb sorption, though both Ca and Cd inhibited the adsorption of Pb at exchange sites. Lead appears to more readily undergo inner-sphere surface complexation with soil surface functional groups than either Cd or Ca. Thus, regardless of when Pb is introduced to a soil, it should be less labile than Cd.     

Inter-laboratory exercise on steroid estrogens in aqueous samples

An inter-laboratory comparison exercise was organized among European laboratories, under the aegis of EU COST Action 636: “Xenobiotics in Urban Water Cycle”. The objective was to evaluate the performance of testing laboratories determining “Endocrine Disrupting Compounds” (EDC) in various aqueous matrices. As the main task three steroid estrogens: 17α-ethinylestradiol, 17β-estradiol and estrone were determined in four spiked aqueous matrices: tap water, river water and wastewater treatment plant influent and effluent using GC-MS and LC-MS/MS. Results were compared and discussed according to the analytical techniques applied, the accuracy and reproducibility of the analytical methods and the nature of the sample matrices. Overall, the results obtained in this inter-laboratory exercise reveal a high level of competence among the participating laboratories for the detection of steroid estrogens in water samples indicating that GC-MS as well as LC-MS/MS can equally be employed for the analysis of natural and synthetic hormones.