Sediment accumulation of organic halogens in pristine forest lakes

Sediment accumulation of organic halogen was studied in two forest lakes, one pristine and one which received 30 m³ of biologically purified bleaching wastewater from a kraft pulp mill in 1979 equivalent to ca. 2 kg of adsorbable organic halogen (AOX). Lake sediments were dated with²¹⁰Pb,¹³⁴Cs and¹³⁷Cs and the annual deposition rates of organic halogens and organic matter were calculated. Organic bound halogen contents of the sediment aged 150 years was 180 μg Cl g^?1 d.w. in both lakes. The concentration of organic bound halogen at the topmost 6 cm of the sediments (less than 20-years-old) ranged from 45 to 80 μg Cl g^?1 d.w. This suggests that solvent extractable halogen had enriched in the older sediment layers. The deposition of extractable organic halogen (EOX) in the lakes in 1950’s was 4 to 5 mg Cl m^?2 a^?1. Since then, the depositon of EOX doubled in both lakes. The deposition of organic matter increased concomitantly from 50 g m^?2 a^?1 to 110 g m^?2 a^?1 in Lake Mustalampi and from 35 g m^?2 a^?1 to 62 g m^?2 a^?1 in Lake Pyylampi suggesting that the increase in the deposition of organic halogen followed the increase in the deposition of organic matter. Of the 2 kg of organic halogen discharged into the lake, 5% or less was detected in the sediment in tetrahydrofuran extractable form 15 years later.     

Exposure of garbage truck drivers and maintenance personnel at a waste handling centre to polycyclic aromatic hydrocarbons derived from diesel exhaust

Exposure to diesel exhaust was evaluated in summer and winter by measuring vapour and particle phase polycyclic aromatic hydrocarbons (PAHs). Fifteen PAHs were simultaneously determined from the air samples obtained from truck drivers collecting household waste and maintenance personnel at a waste handling centre. The major compounds analysed from the personal air samples of exposed workers were naphthalene, phenanthrene and fluorene. The total PAH exposure (sum of 15 PAHs) of garbage truck drivers ranged from 71 to 2,660 ng m(-3) and from 68 to 900 ng m-3 in the maintenance work. The exposure of garbage truck drivers to benzo[a]pyrene (B[a]P) ranged from the mean of 0.03 to 0.3 ng m(-3) whereas no B[a]P in control samples or in those collected from maintenance workers was detected. A statistically significant difference in diesel-derived PAH exposure between the garbage truck drivers and the control group in both seasons (in summer p = 0.0022, degrees of freedom (df) 70.5; and in winter p < 0.0001, df = 80.4) was observed. Also, a significant difference in PAH exposure between the garbage truck drivers and the maintenance workers (in summer p < 0.0001, df = 50.1; and in winter p < 0.0001, df = 44.2) was obtained.     

Exposure to airborne isocyanates and other thermal degradation products at polyurethane-processing workplaces

The thermal degradation products of polyurethanes (PURs) and exposure to isocyanates were studied by stationary and personal measurements in five different occupational environments. Isocyanates were collected on glass fibre filters impregnated with 1-(2-methoxyphenyl)piperazine (2MP) and in impingers containing n-dibutylamine (DBA) in toluene. connected to a glass fibre postfilter. The derivatives formed were analysed by liquid chromatography: 2MP derivatives with UV and electrochemical detection and DBA derivatives with mass spectrometric detection. The release of aldehydes and other volatile organic compounds into the air was also studied. In a comparison of the two sampling methods, the 2MP method yielded about 20% lower concentrations for 4,4'-methylenediphenyl diisocyanate (MDI) than did the DBA method. In car repair shops, the median concentration of diisocyanates (given as NCO groups) in the breathing zone was 1.1 microg NCO m(-3) during grinding and 0.3 microg NCO m(-3) during welding, with highest concentrations of 1.7 and 16 pg NCO m(-3), respectively. High concentrations of MDI, up to 25 and 19 microg NCO m(-3), respectively, were also measured in the breathing zone during welding of district heating pipes and turning of a PUR-coated metal cylinder. During installation of PUR-coated floor covering, small amounts of aliphatic diisocyanates were detected in the air. A small-molecular monoisocyanate, methyl isocyanate, and isocyanic acid were detected only during welding and turning operations. The diisocyanate concentrations were in general higher near the emission source than in the workers' breathing zone. A sampling strategy to evaluate the risk of exposure to isocyanates is presented.     

Air concentrations and urinary metabolites of polycyclic aromatic hydrocarbons among paving and remixing workers

The exposure of paving workers to polycyclic aromatic hydrocarbons (PAH) during stone mastic asphalt (SMA) paving and remixing was evaluated. The effects on the workers' PAH exposure were also evaluated during the use of an industrial by-product, coal fly ash (CFA), instead of limestone as the filler in the SMA. The PAH exposure was measured by personal air sampling and by analysing the levels of urinary naphthols, phenanthrols and 1-hydroxypyrene (1-OHP) in the workers' pre- and post-shift urine samples. The respiratory PAH exposure of the paving workers (geometric mean (GM) 5.7 microg m(-3)) was about ten-fold that of the traffic controllers (GM 0.43 microg m(-3)). The levels of PAH metabolites were significantly higher (p < 0.05) in the post-shift urine samples than in the pre-shift urine samples, and the levels of metabolites in the post-shift urine of paving workers were significantly higher than in that of the controls (p < 0.01). Urinary 1-naphthol correlated well with the airborne concentrations of the two- to three-ring PAHs (r = 0.544, p = 0.003) and naphthalene (r = 0.655, p < 0.001), when non-smoking paving workers were tested. A good correlation was observed between urinary 1-OHP and the airborne concentrations of the four- to six-ring PAHs (r = 0.524, p = 0.003) as well as total PAHs (r = 0.575, p = 0.001). The concentrations of 1-OHP and phenanthrols in the urine of the pavers were significantly higher (p < 0.01) during remixing than during SMA paving. The CFA in the asphalt had no effect on the airborne PAH exposure or on the concentrations of the PAH metabolites in the paving workers' urine.     

Role of sea-ice biota in nutrient and organic material cycles in the northern Baltic Sea

This paper compiles biological and chemical sea-ice data from three areas of the Baltic Sea: the Bothnian Bay (Hailuoto, Finland), the Bothnian Sea (Norrby, Sweden), and the Gulf of Finland (Tv?rminne, Finland). The data consist mainly of field measurements and experiments conducted during the BIREME project from 2003 to 2006, supplemented with relevant published data. Our main focus was to analyze whether the biological activity in Baltic Sea sea-ice shows clear regional variability. Sea-ice in the Bothnian Bay has low chlorophyll a concentrations, and the bacterial turnover rates are low. However, we have sampled mainly land-fast level first-year sea-ice and apparently missed the most active biological system, which may reside in deformed ice (such as ice ridges). Our limited data set shows high concentrations of algae in keel blocks and keel block interstitial water under the consolidated layer of the pressure ridges in the northernmost part of the Baltic Sea. In land-fast level sea-ice in the Bothnian Sea and the Gulf of Finland, the lowermost layer appears to be the center of biological activity, though elevated biomasses can also be found occasionally in the top and interior parts of the ice. Ice algae are light limited during periods of snow cover, and phosphate is generally the limiting nutrient for ice bottom algae. Bacterial growth is evidently controlled by the production of labile dissolved organic matter by algae because low growth rates were recorded in the Bothnian Bay with high concentrations of allochthonous dissolved organic matter. Bacterial communities in the Bothnian Sea and the Gulf of Finland show high turnover rates, and activities comparable with those of open water communities during plankton blooms, which implies that sea-ice bacterial communities have high capacity to process matter during the winter period.     

Effect of birch (Betula spp.) and associated rhizoidal bacteria on the degradation of soil polyaromatic hydrocarbons, PAH-induced changes in birch proteome and bacterial community

Two birch clones originating from metal-contaminated sites were exposed for 3 months to soils (sand-peat ratio 1:1 or 4:1) spiked with a mixture of polyaromatic hydrocarbons (PAHs; anthracene, fluoranthene, phenanthrene, pyrene). PAH degradation differed between the two birch clones and also by the soil type. The statistically most significant elimination (p ≤ 0.01), i.e. 88% of total PAHs, was observed in the more sandy soil planted with birch, the clearest positive effect being found with Betula pubescens clone on phenanthrene. PAHs and soil composition had rather small effects on birch protein complement. Three proteins with clonal differences were identified: ferritin-like protein, auxin-induced protein and peroxidase. Differences in planted and non-planted soils were detected in bacterial communities by 16S rRNA T-RFLP, and the overall bacterial community structures were diverse. Even though both represent complex systems, trees and rhizoidal microbes in combination can provide interesting possibilities for bioremediation of PAH-polluted soils.     

Implications of regulation based on the IPPC directive – A review on the Finnish pulp and paper industry

This article evaluates the impacts of integrated environmental permits on the environmental performance of Finnish pulp and paper industry. It assesses the performance of the Finnish pulp and paper mills in relation to the EU best available techniques (BAT) associated emission levels and compares the emission limit values and product specific emissions of the mills with non-integrated permits to those of the mills with new integrated permits. A set of practical indicators for the assessment of BAT, local conditions and transboundary effects is presented and discussed. Moreover, the paper highlights some significant cross-media aspects in the Finnish pulp and paper industry.     

Characterisation of urban inhalation exposures to benzene,formaldehyde and acetaldehyde in the European Union

BACKGROUND, AIM AND SCOPE: All across Europe, people live and work in indoor environments. On average, people spend around 90% of their time indoors (homes, workplaces, cars and public transport means, etc.) and are exposed to a complex mixture of pollutants at concentration levels that are often several times higher than outdoors. These pollutants are emitted by different sources indoors and outdoors and include volatile organic compounds (VOCs), carbonyls (aldehydes and ketones) and other chemical substances often adsorbed on particles. Moreover, legal obligations opposed by legislations, such as the European Union's General Product Safety Directive (GPSD) and Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), increasingly require detailed understanding of where and how chemical substances are used throughout their life-cycle and require better characterisation of their emissions and exposure. This information is essential to be able to control emissions from sources aiming at a reduction of adverse health effects. Scientifically sound human risk assessment procedures based on qualitative and quantitative human exposure information allows a better characterisation of population exposures to chemical substances. In this context, the current paper compares inhalation exposures to three health-based EU priority substances, i.e. benzene, formaldehyde and acetaldehyde. MATERIALS AND METHODS: Distributions of urban population inhalation exposures, indoor and outdoor concentrations were created on the basis of measured AIRMEX data in 12 European cities and compared to results from existing European population exposure studies published within the scientific literature. By pooling all EU city personal exposure, indoor and outdoor concentration means, representative EU city cumulative frequency distributions were created. Population exposures were modelled with a microenvironment model using the time spent and concentrations in four microenvironments, i.e. indoors at home and at work, outdoors at work and in transit, as input parameters. Pooled EU city inhalation exposures were compared to modelled population exposures. The contributions of these microenvironments to the total daily inhalation exposure of formaldehyde, benzene and acetaldehyde were estimated. Inhalation exposures were compared to the EU annual ambient benzene air quality guideline (5 microg/m3-to be met by 2010) and the recommended (based on the INDEX project) 30-min average formaldehyde limit value (30 microg/m3). RESULTS: Indoor inhalation exposure contributions are much higher compared to the outdoor or in-transit microenvironment contributions, accounting for almost 99% in the case of formaldehyde. The highest in-transit exposure contribution was found for benzene; 29.4% of the total inhalation exposure contribution. Comparing the pooled AIRMEX EU city inhalation exposures with the modelled exposures, benzene, formaldehyde and acetaldehyde exposures are 5.1, 17.3 and 11.8 microg/m3 vs. 5.1, 20.1 and 10.2 microg/m3, respectively. Together with the fact that a dominating fraction of time is spent indoors (>90%), the total inhalation exposure is mostly driven by the time spent indoors. DISCUSSION: The approach used in this paper faced three challenges concerning exposure and time-activity data, comparability and scarce or missing in-transit data inducing careful interpretation of the results. The results obtained by AIRMEX underline that many European urban populations are still exposed to elevated levels of benzene and formaldehyde in the inhaled air. It is still likely that the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended formaldehyde 30-min average limit value of 30 microg/m3 are exceeded by a substantial part of populations living in urban areas. Considering multimedia and multi-pathway exposure to acetaldehyde, the biggest exposure contribution was found to be related to dietary behaviour rather than to inhalation. CONCLUSIONS: In the present study, inhalation exposures of urban populations were assessed on the basis of novel and existing exposure data. The indoor residential microenvironment contributed most to the total daily urban population inhalation exposure. The results presented in this paper suggest that a significant part of the populations living in European cities exceed the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended (INDEX project) formaldehyde 30-min average limit value of 30 microg/m3. RECOMMENDATIONS AND PERSPECTIVES: To reduce exposures and consequent health effects, adequate measures must be taken to diminish emissions from sources such as materials and products that especially emit benzene and formaldehyde in indoor air. In parallel, measures can be taken aiming at reducing the outdoor pollution contribution indoors. Besides emission reduction, mechanisms to effectively monitor and manage the indoor air quality should be established. These mechanisms could be developed by setting up appropriate EU indoor air guidelines.     

Quantitative analysis of environmental factors in differential weighing of blank Teflon filters

Mass differences less than 100 microg must be correctly measured in gravimetric analysis of particles collected on filters. Even small variations in mass measurement may contribute significant errors to calculated concentrations. In addition to the collected particles, a number of other factors affect the observed mass difference between the measurements before and after sampling. The most often controlled of these factors are static charge, temperature, and humidity. Using 951 laboratory blank filter weights, we have statistically analyzed these and other factors that affect the observed filter weight. Some of these are controllable or correctable; others are not and enter into the final results as errors. The standard deviation of differential blank filter weighing after applying all corrections was 2.7 microg. The most important correctable factors are air buoyancy variation and filter storage time. When weighing blank Teflon filters at relative humidity < 50%, these are an order of magnitude more important than weighing-room humidity. Using field blank filters in each weighing batch could control these three factors but also doubles the errors caused by balance random variation and filter handling contamination, because four weighing measurements and the handling of two filters are needed to obtain one corrected differential mass result.     

S -phenylcysteine adduct concentration in serum albumin of countryside residents and factory workers in Estonia

In this communication we present data on S-phenylcysteine (SPC) in human serum albumin in an Estonian cohort. A total of 112 human samples were collected from workers of a benzene processing plant in Kohtla-Järve, Estonia and another 56 samples from nearby countryside residents. Albumin was isolated using a sequential precipitation method designed for low volume plasma samples. The adducted cysteine derivatives were cleaved off from the albumin and subsequently derivatized to phenyl trifluorothioacetate (PTTA) derivatives. Derivatized adducts were subjected to GC/MS analysis utilizing negative chemical ionization and a selected ion monitoring (SIM) technique. The detection limit for the PTTA adduct was 0.2?pmol?g^?1 albumin and the limit of quantification was 2?pmol?g^?1 albumin. The method utilized deuterated SPC as an internal standard. The analysis revealed that adduct levels were also high in the population that was not occupationally exposed to benzene. The reason for this is unknown, but may cause problems if not of environmental origin, when one is attempting to monitor low level occupational or environmental benzene exposure.