Heavy metals concentration in edible fishes from coastal region of Kalpakkam, southeastern part of India

Concentrations of Cu, Mn, Zn, Fe, Cr, and Pb were estimated using ICP-MS in nine commercially important and locally consumed fish species (Sarda orientalis, Scomberomorus commerson, Rastrelliger kanagurta, Sardinella longiceps, Paraplagusia bilineata, Cynoglossus lida, Cynoglossus macrostomus, Lepturacanthus savala, and Siganus javus) collected from coastal waters of Kalpakkam, eastern part of India. Their concentration (μg g(-1)) in the examined fish species ranged as follows: Cu (0.8-6.5), Zn (14.3-27.9), Mn (0.5-8.8), Fe (17.6-117.0), Cr (0.24-1.78), and Pb (0.18-2.29). Concentrations of most of the metals in the fish species studied were found to be safe for human consumption barring Mn.     

Studies on urban drinking water quality in a tropical zone

Anthropogenic activities associated with industrialization, agriculture and urbanization have led to the deterioration in water quality due to various contaminants. To assess the status of urban drinking water quality, samples were collected from the piped supplies as well as groundwater sources from different localities of residential, commercial and industrial areas of Lucknow City in a tropical zone of India during pre-monsoon for estimation of coliform and faecal coliform bacteria, organochlorine pesticides (OCPs) and heavy metals. Bacterial contamination was found to be more in the samples from commercial areas than residential and industrial areas. OCPs like α,γ-hexachlorocyclohexane and 1,1 p,p-DDE {dichloro-2, 2-bis(p-chlorophenyl) ethene)} were found to be present in most of the samples from study area. The total organochlorine pesticide levels were found to be within the European Union limit (0.5 μg/L) in most of the samples. Most of the heavy metals estimated in the samples were also found to be within the permissible limits as prescribed by World Health Organization for drinking water. Thus, these observations show that contamination of drinking water in urban areas may be mainly due to municipal, industrial and agricultural activities along with improper disposal of solid waste. This is an alarm to safety of public health and aquatic environment in tropics.     

Performance evaluation of isoproturon-degrading indigenous bacterial isolates in soil microcosm

Isoproturon (IPU)-degrading soil bacteria were isolated from herbicide-applied wheat fields. These isolates were identified using cultural, morphological, biochemical and 16S rRNA sequencing methods. 16S rRNA sequences of both the bacterial isolates were compared with NCBI GenBank data base and identified as Bacillus pumilus and Pseudoxanthomonas sp. A soil microcosm study was carried out for 40 days in six different treatments. Experimental results revealed maximum 95.98% IPU degradation in treatment 6 where bacterial consortia were augmented in natural soil, followed by 91.53% in treatment 5 enriched with organic manure as an additional carbon source. However, only 14.03% IPU was degraded in treatment 1 (control) after 40 days. In treatments (2–4), 75.59%, 70.92% and 77.32% IPU degradation was recorded, respectively. IPU degradation in all the treatments varied significantly over the control. 4-Isopropylaniline was detected as IPU degradation by-product in the medium. The study confirmed that B. pumilus and Pseudoxanthomonas sp. performed effectively in soil microcosms and could be employed profitably for field-scale bioremediation experiments.     

Interaction of different forms of graphene with chicken embryo red blood cells

With the rapid development of graphene synthesis and functionalization approaches, graphene and its related derivatives have shown great potential in many applications in material science, including biomedical applications. Several in vitro and in vivo studies clearly showed no definitive risks, while others have indicated that graphene might become health hazards. In this study, we explore the biocompatibility of graphene-related materials with chicken embryo red blood cells (RBC). The hemolysis assay was employed to evaluate the in vitro blood compatibility of reduced graphene, graphene oxide, and reduced graphene oxide, because these materials have recently been used for biomedical applications, including injectable graphene-related particles. This study investigated structural damage, ROS production and hemolysis of chicken embryo red blood cells. Different forms of graphene, when incubated with chicken embryo RBC, were harmful to cell structure and induced hemolysis.     

Studies on influence of natural biowastes on cellulase production by Aspergillus niger

The objective of this study was to determine the influence of natural biowaste substrates such as banana peel powder and coir powder at varying environmental parameters of pH (4-9) and temperature (20-50 degrees C) on the cellulase enzyme production by Aspergillus niger. The cellulase enzyme production was analyzed by measuring the amount of glucose liberated in IU ml(-1) by using the dinitrosalicylic acid assay method. The substrates were pretreated with 1% NaOH (alkaline treatment) and autoclaved. The maximum activity of the enzyme was assayed at varying pH with temperatures being constant and varying temperatures with pH being constant. The highest activity of the enzyme at varying pH was recorded at pH 6 for banana peel powder (0.068 +/- 0.002 IU ml) and coir powder (0.049 +/- 0.002 IU ml(-1)) and the maximum activity of the enzyme at varying temperature was recorded at 35 degrees C for both banana peel powder (0.072 +/- 0.001 IU ml(-1)) and coir powder (0.046 +/- 0.003 IU ml(-1)). At varying temperatures and pH the high level of enzyme production was obtained at 35 degrees C and pH 6 by using both the substrates, respectively. However among the two substrates used for the production of cellulases by Aspergillus niger banana peel powder showed maximum enzymatic activity than coir powder as substrate.     

Comparison of two dynamic measurement methods of odor and odorant emission rates from freshly dewatered biosolids

Odor and odorant emission rates from freshly dewatered biosolids in a dewatering building of a Water Reclamation Plant (WRP) are measured using the EPA flux chamber and wind tunnel methods. Experimental results are compared statistically to test whether the two methods result in similar emission rates when experiments are performed under field conditions. To the best of our knowledge the literature is void of studies comparing the two methods indoors. In this paper the two methods are compared indoors where the wind velocity and air exchange rate are pertinent field conditions and can be measured. The difference between emission rates of odor and hydrogen sulfide measured with the two methods is not statistically significant (P values: 0.505 for odor, 0.130 for H(2)S). It is concluded that both methods can be used to estimate source emissions but selection of the most effective or efficient method depends on prevailing environmental conditions. The wind tunnel is appropriate for outdoor environments where wind effects on source emissions are more pronounced than indoors. The EPA flux chamber depends on the air exchange rate of the chamber, which simulates corresponding conditions of the indoor environment under investigation and is recommended for estimation of indoor pollution sources.     

Total concentrations, fractionation and mobility of heavy metals in soils of urban area of Guwahati, India

This work describes the results of assessment of the heavy metals, Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn in urban soil of Guwahati City, India from 31 sites of five different land use types covering residential, commercial, industrial, public utilities, and roadside. Sequential extraction procedure was used to evaluate the relative distribution of the eight metals in exchangeable, carbonate, reducible (Fe?CMn oxide), organic and sulfide, and residual fractions. Of the eight metals, Cd and Co occur in lower concentrations (Cd <?< Co) in all types of land, and concentration variation from one type of land use to another is not much significant for both the metals. Ni presence is more than Co, and the concentrations show some variation depending on land use status. Average Cr and Cu concentrations are ??100?mg/kg, but Cr has a significantly higher presence in industrial land use. The results are similar in case of Pb. The two metals, Mn and Zn have domination over the other metals, and the values are ??300?mg/kg. Industrial and roadside soil contains much more Mn, while commercial soil is most enriched with Zn. Of the metals, Ni has the largest proportion (~42%) bound to the exchangeable fraction and Co, Cr, and Pb also have appreciable proportion bound to the same fraction. A significant amount of Co is associated with carbonates. The reducible fraction has bound considerable quantity of Mn and Zn, while most of Cu is associated with the organic and sulfide fraction. Both Cd and Pb are dominantly associated with the residual fraction. Computation of the mobility factor of the metals indicates Mn to be the most mobile metal present in the soil samples.     

Studies on the protein binding mechanism of p-aninodiphenylamine: A hair dye constituent

p-Aminodiphenylamine (p-ADPA) has got a binding capacity with tissue proteins. Aspartic and glutamic acids are presumably the responsible units in the protein chain involved in this binding with p-ADPA. p-ADPA is changed into a quinone structure after atmospheric oxidation in Krebs-Ringer-Bicarbonate buffer, pH 7.4 in the presence of trace metal ions. This oxidised form of p-ADPA binds with aspartic acid at pH 7.4 and temperature 40° in 2 hrs. The derivative thus formed absorbs at 450 nm instead of 430 nm.     

Biodegradability of PMMA Blends with Some Cellulose Derivatives

High polymer blends of Polymethyl methacrylate (PMMA) with cellulose acetate (CA) and Cellulose acetate phthalate (CAP) of varying blend compositions have been prepared to study their biodegradation behavior and blend miscibility. Films of PMMA–CA, and PMMA–CAP blends have been prepared by solution casting using Acetone and Dimethyl formamide(DMF) as solvents respectively. Biodegradability of these blends has been studied by four different methods namely, soil burial test, enzymatic degradation, and degradation in phosphate buffer and activated sludge degradation followed by water absorption tests to support the degradation studies. Degradation analysis was done by weight loss method. The results of all the tests showed sufficient biodegradability of these blends. Degradability increased with the increase in CA and CAP content in the blend compositions. The miscibility of PMMA–CA and PMMA–CAP blends have been studied by solution viscometric and ultrasonic methods. The results obtained reveal that PMMA forms miscible blends with either CA or CAP in the entire composition range. Miscibility of the blends may be due to the formation of hydrogen bond between the carbonyl group of PMMA and the free hydroxyl group of CA and CAP.