Effects of dredging on benthic diatom assemblages in a lowland stream

The objective of this study was to assess the effects of dredging on the structure and composition of diatom assemblages from a lowland stream and to investigate whether the response of diatom assemblages to the dredging is also influenced by different water quality. Three sampling sites were established in Rodríguez Stream (Argentina); physico-chemical variables and benthic diatom assemblages were sampled weekly in spring 2001. Species composition, cell density, diversity and evenness were estimated. Diatom tolerance to organic pollution and eutrophication were also analyzed. Differences in physico-chemical variables and changes in benthic diatom assemblages were compared between the pre- and post-dredging periods using a t-test. Data were analyzed using Principal Components Analysis (PCA), non-metric multidimensional scaling (MDS) ordination and cluster analysis. The effects of dredging in the stream involve two types of disturbances: (i) in the stream bed, by the removal and destabilization of the substrate and (ii) in the water column, by generating chemical changes and an alteration of the light environment of the stream. Suspended solids, soluble reactive phosphorus and dissolved inorganic nitrogen were significantly higher in post-dredging periods. Physical and chemical modifications in the habitat of benthic diatoms produced changes in the assemblage; diversity and species numbers showed an immediate increase after dredging, decreasing at the end of the study period. Changes in the tolerance of the diatom assemblage to organic pollution and eutrophication were also observed as a consequence of dredging; in the post-dredging period sensitive species were replaced by either tolerant or most tolerant species. These changes were particularly noticeable in site 1 (characterized by its lower amount of nutrients and organic matter previous to dredging), which showed an increase in the amount of nutrients and oxygen demand as a consequence of sediment removal. However, these changes were not so conspicuous in sites 2 and 3, which already presented a marked water quality deterioration before the execution of the dredging works.     

Optimisation of pressurised liquid extraction for elimination of sulphur interferences during determination of organotin compounds in sulphur-rich sediments by gas chromatography with flame photometric detection

A simple method for species-selective analysis of organotin compounds (OTCs) (butyl and phenyl) in sediments was developed. The sample preparation procedure was specifically optimised for sulphur-rich sediments to eliminate interferences from elemental sulphur and organosulphur compounds. Tin species were extracted from sediment samples using pressurised liquid extraction technique (PLE), ethylated - with simultaneous extraction to isooctane - in aqueous phase with sodium tetraethylborate (NaBEt(4)) and separated/detected by gas chromatography with flame photometric detection (GC-FPD). PLE operational variables (extraction temperature and pressure, solvent composition and number of static extraction steps) and extract handling routine were fine-tuned to minimise the amount of extracted interferents while keeping OTCs recovery at an acceptable level. Best results were obtained after extraction of sediment samples with methanol/water (75% v/v methanol) solution of acetic acid/sodium acetate with tropolone addition (0.6 g l(-1)). Derivatisation of low temperature, high-pressure (50 degrees C, 13.8 MPa) extracts gives isooctane extracts which are clean enough to be directly analysed by GC-FPD without any further cleanup. Interferences from elemental sulphur were completely eliminated while concentrations of other interferents were reduced to the level not impairing quantitation of OTCs under the study. No negative effects in terms of chromatographic column deterioration were observed after repeated injections of such extracts. Two certified reference materials, BCR646 and PACS-2, were analysed to assess performance of the method. Recoveries of all OTCs under the study, except MBT, were in the range of 91-114%. MBT extraction efficiency was low (34-47%) therefore the method is unsuitable for precise determinations of this compound.     

Electrochemical and FTIR studies of the mutual influence of lead(II) or iron(III) and phenol on their adsorption from aqueous acid solution by modified activated carbons

Cyclic voltammetry and spectral FTIR studies of the influence of activated carbon surface modification on the co-adsorption of metal cation (lead or iron) and phenol from aqueous acidic solution were carried out. The diversity in surface chemical structure was achieved by applying different procedures of inorganic matter removal and by modifying the carbon samples in various ways: heating under vacuum, aminoxidation in an ammonia-oxygen atmosphere, oxidation with concentrated nitric acid. The quantities of adsorbed metal ions (Pb(2+) or Fe(3+)) and phenol from solutions containing cation or phenol separately or in a mixture were determined. The adsorption capacity from acidic aqueous acidic solution depends on the chemical properties of the activated carbon surface (e.g., decrease in phenol adsorption with relative lower basicity of the adsorbent). The electrochemical parameters of electrodes made from the carbon samples were estimated, and some possible electrochemical reactions were determined from voltammograms recorded in acid electrolyte solution containing adsorbed species (separately or as a mixture). Relationships were found between metal ion adsorption and electrochemical behavior of Pb(2+)/Pb(4+) and Fe(3+)/Fe(2+) couples on the one hand, and the presence of phenol in the solutions tested and the influence of surface chemistry of the carbon electrodes on electrochemical processes on the other. The changes in adsorption capacity with respect to the adsorbates used and the changes in FTIR spectra of the carbons as a result of adsorption and/or coupling phenol molecules are discussed.     

Co-combustion of dried sewage sludge and coal in a pulverized coal boiler

More than 1.1 million tons of municipal and industrial sewage sludge is produced annually in Poland. Most of this sewage sludge is landfilled or used for recultivation and fertilization of soil. After accession of Poland to the EU, large investments are planned for wastewater treatment, so it is expected that the amount of sewage sludge produced in Poland will grow in the near future. It is well known that the combustion of sewage sludge is becoming a more and more popular utilization method of such waste. Unfortunately, the current situation in Poland makes it impossible to incinerate the sewage sludge because of a lack of incinerators. One possible solution for Poland is the co-firing of dried sewage sludge in existing coal-fired utility boilers. This article presents results of initial Polish industrial trials of dried municipal sewage sludge and hard coal co-combustion in an OP-230 pulverized coal boiler. Such a solution was shown to be technically viable and not to require changes to the existing technological system. Cocombustion of sewage sludge with coal in power plants seems to be the best solution for sludge utilization in the near future in Poland.     

NMR study of the humification process during sewage sludge treatment

Humic acids, extracted from sludge at the biologic-mechanical sewage treatment plant in Jastrzebie Zdroj, have been investigated by means of (1)H, (13)C and (31)P NMR spectroscopy. Sludge samples for studies were taken from the primary settling tank, the nitrification chamber, the digestion chamber and the sludge drying beds. The (1)H NMR analysis of humic acid extracted from sludge at various stages of sewage treatment confirmed the presence of the functional groups that are characteristic for humic substances, and the analysis showed changes in their relative intensities. The (13)C NMR indicated that the aromatisation of the humic acid increased during sewage treatment. Moreover, the analysis of the (31)P NMR spectra allowed us to observe the changes in the phosphorus groups of the studied humic acids.     

Marine and farmed fish on the Polish market: comparison of the nutritive value and human exposure to PCDD/Fs and other contaminants

Chemical analyses were performed in nine fish species that are popular on the Polish market. These included Baltic fish (cod, herring, salmon), fish farmed in Poland (carp, trout), marine fish imported from China (Alaska pollock, sole), and farmed fish imported from Vietnam and China (sutchi catfish, tilapia). The nutritional composition (amino acid, micro- and macronutrients, fat-soluble vitamins - A₁, D₃, E) and certain contaminants (organochlorine pesticides, OCPs; indicator polychlorinated biphenyl, PCB₆; polychlorinated dibenzo-paradioxins and polychlorinated dibenzofurans, PCDD/Fs; dioxin-like polychlorinated biphenyls, dl-PCBs; organotin compounds, OCTs; dyes, malachite green and crystal violet; veterinary drug residues, nitrofurans and chloramphenicol; toxic metals, Cd, Pb, Hg) in the muscle tissues of fish were determined. It was confirmed that the fish species analyzed were excellent sources of amino acids, and were rich in phosphorous and selenium. Baltic Sea fish (salmon, herring), fish farmed in Poland (carp and trout), and tilapia were also rich in vitamin D₃.Traces of OCP, PCB₆, OCT, dyes, veterinary drug residues, and heavy metals were detected in concentrations which do not pose a threat to consumers at the current rate of fish consumption in Poland. However, the problem might arise from the content of PCDD/Fs and dl-PCBs in fatty Baltic fish. The fish species analyzed, differed in their nutritional values and degrees of contamination. We suggest that for optimum health and safety, it is advisable that consumers include a variety of different fish species in their diets.     

Efficacy of supplementation of selected medicinal mushrooms with inorganic selenium salts

The aim of the study was to evaluate the possibility of supplementation with inorganic forms of selenium (Na₂SeO₄ and Na₂SeO₃) in concentrations of 0, 0.1, 0.2, 0.4, 0.6, 0.8, 1.0 and 1.5 mM of three medicinal mushroom species: Agrocybe aegerita, Hericium erinaceus and Ganoderma lucidum. Tested mushroom species grew in Se additions of 0–0.6 mM (A. aegerita and H. erinaceus), while growth of G. lucidum bodies was observed for 0–0.8 mM. For the latter mushroom species, the total Se content was the highest. Content of Se_org was diverse; for control bodies it was the highest for G. lucidum (only organic forms were present), lower for A. aegerita (84% organic forms) and the lowest for H. erinaceus (56% organic forms). Accumulation of Se(IV) was generally significantly higher than Se(VI) for all tested mushroom species. There was no significant decrease of A. aegerita or G. lucidum biomass with the exception of G. lucidum bodies growing under 0.8 mM of Se species addition (15.51 ± 6.53 g). Biomass of H. erinaceus bodies was the highest under 0.2 (197.04 ± 8.73 g), control (191.80 ± 6.06 g) and 0.1 mM (185.04 ± 8.73 g) of both inorganic salts. The addition to the medium of Se salts brought about macroscopic changes in the fruiting bodies of the examined mushrooms. Concentrations exceeding 0.4 mM caused diminution of carpophores or even their total absence. In addition, colour changes of fruiting bodies were also recorded. At Se concentrations of 0.4 and 0.6 mM, A. aegerita fruiting bodies were distinctly lighter and those of H. erinaceus changed colour from purely white to white-pink.     

Particulate matter levels in a South American megacity: the metropolitan area of Lima-Callao,Peru

The temporal and spatial trends in the variability of PM₁₀ and PM_2.5 from 2010 to 2015 in the metropolitan area of Lima-Callao, Peru, are studied and interpreted in this work. The mean annual concentrations of PM₁₀ and PM_2.5 have ranges (averages) of 133–45 μg m^?3 (84 μg m^?3) and 35–16 μg m^?3 (26 μg m^?3) for the monitoring sites under study. In general, the highest annual concentrations are observed in the eastern part of the city, which is a result of the pattern of persistent local winds entering from the coast in a south-southwest direction. Seasonal fluctuations in the particulate matter (PM) concentrations are observed; these can be explained by subsidence thermal inversion. There is also a daytime pattern that corresponds to the peak traffic of a total of 9 million trips a day. The PM_2.5 value is approximately 40% of the PM₁₀ value. This proportion can be explained by PM₁₀ re-suspension due to weather conditions. The long-term trends based on the Theil-Sen estimator reveal decreasing PM₁₀ concentrations on the order of ?4.3 and ?5.3% year^?1 at two stations. For the other stations, no significant trend is observed. The metropolitan area of Lima-Callao is ranked 12th and 16th in terms of PM₁₀ and PM_2.5, respectively, out of 39 megacities. The annual World Health Organization thresholds and national air quality standards are exceeded. A large fraction of the Lima population is exposed to PM concentrations that exceed protection thresholds. Hence, the development of pollution control and reduction measures is paramount.