The interactions of Cr (VI) concentrations and amendments (biochar and manure) on growth and metal accumulation of two species of Salicornia in contaminated soil

Environmental Science and Pollution Research - Heavy metals are among the most dangerous contaminants in the environment. Organic components and plant species that can accumulate and stabilize...     

Assessment of heavy metal enrichment in the offshore fine-grained sediments of the Caspian Sea

Sampling of the offshore seabed sediments of southwestern part of the Caspian Sea was carried out by gravity corer in order to study heavy metal concentration and the physicochemical factors controlling their distribution in the fine-grained fraction. The grain size distribution, amount, and type of clay minerals, total organic carbon (TOC) content, and Eh–pH of the sediments were determined. The average concentrations of the heavy metals in ppm are Mn (563), Cu (207.5), Sr (187), Zn (94), Pb (26.3), Ni (14.5), Co (11.5), Cd (2.56), and Ag (1.04) in their order of abundances. Co and Zn mostly indicate increase in silt-size fraction of the sediments suggesting their probable detrital provenance but the Mn, Ni, Cu, Sr, Pb, Cd, and Ag concentrations show a similar trend to distribution of the clay-size fraction. The concentrations of Mn, Co, and Cd increase with increase in the TOC content but the Cu, Pb, Ni, Ag, and Sr concentrations decrease with increase of the TOC content. The amounts of Zn, Cu, Sr, Pb, Cd, and Ag increase with increase in the CaCO₃ content. The calculated enrichment factor indicates that the sediments are very strong to extremely enriched in Ag, significantly enriched in Cu and Cd, and depleted to mineral for Pb, Sr, Co, Ni, and Zn. Variations of the Cu, Sr, Cd, Ag, and Pb concentrations are similar to the clay and CaCO₃ distributions.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L(-1) for Telone vapor and 4.8-24 mg L(-1) for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L(-1). In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

A hybrid statistical decision-making optimization approach for groundwater vulnerability considering uncertainty

Environmental Science and Pollution Research - Recognizing the vulnerable areas for contamination is a feasible way to protect groundwater resources. The main contribution of the paper is...     

Sonochemical versus reverse-precipitation synthesis of CuxO/Fe2O3/MoC nano-hybrid: removal of reactive dyes and evaluation of smartphone for colorimetric detection of organic dyes in water media

Environmental Science and Pollution Research - In the present work, an ultrasound-assisted reverse-precipitation method was applied as a new approach for the synthesis of CuxO/Fe2O3/MoC. In the...     

Effects of cimetidine and N-acetylcysteine on paraquat-induced acute lung injury in rats: a preliminary study

Abstract

Lung injury in rats challenged with paraquat at 20?mg kg^?1 body weight was histopathologically evident by inflammation, hemorrhage, and vascular congestion. Increased levels of reactive oxygen species and lipid peroxidation, decreased glutathione content, and lower tissue antioxidant capacity was found. The effects of N-acetylcysteine and cimetidine, a well-known potent inhibitor for organic cation transport, were examined. Lung injury was attenuated by N-acetylcysteine but not by cimetidine. The findings are consistent with the assumption that beneficial effects of N-acetylcysteine administration in paraquat-challenged animals might be linked to its ability for preserving the cellular redox environment and preventing oxidative stress, while cimetidine might even hasten paraquat-induced lung injury. On the other hand, the effects of cimetidine on paraquat-induced lung injury underline the importance of future studies on the role of transporters in this complication.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L^?1 for Telone vapor and 4.8–24 mg L^?1 for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L^?1. In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

A total quality management approach to healthcare waste management in Namazi Hospital,Iran

BackgroundHealthcare waste comprises all wastes generated at healthcare facilities, medical research centers and laboratories. Although 75–90% of these wastes are classified as household waste posing no potential risk, 10–25% are deemed to be hazardous, representing a potential threat to healthcare workers, patients, the environment and even the general population, if not disposed of appropriately. If hazardous and non-hazardous waste is mixed and not segregated prior to disposal, costs will increase substantially. Medical waste management is a worldwide issue. In Iran, the majority of problems are associated with an exponential growth in the healthcare sector together with low- or non-compliance with guidelines and recommendations. The aim of this study was to reduce the amounts of infectious waste by clear definition and segregation of waste at the production site in Namazi Hospital in Shiraz, Iran.Materials and methodsNamazi Hospital was selected as a study site with an aim to achieving a significant decrease in infectious waste and implementing a total quality management (TQM) method. Infectious and non-infectious waste was weighed at 29 admission wards over a 1-month period.ResultsBefore the introduction of the new guidelines and the new waste management concept, weight of total waste was 6.67 kg per occupied bed per day (kg/occupied bed/day), of which 73% was infectious and 27% non-infectious waste. After intervention, total waste was reduced to 5.92 kg/occupied bed/day, of which infectious waste represented 61% and non-infectious waste 30%. The implementation of a new waste management concept achieved a 26% reduction in infectious waste.ConclusionA structured waste management concept together with clear definitions and staff training will result in waste reduction, consequently leading to decreased expenditure in healthcare settings.