Global trends and status in waste foundry sand management research during the years 1971-2020: a systematic analysis

Environmental Science and Pollution Research - Waste foundry sand (WFS) is the by-product of the foundry industry, which is produced about 0.6 tons per 1 ton of foundry industry production. While...     

Mineralogical study and leaching behavior of a stabilized harbor sediment with hydraulic binder

The environmental assessment of potential effects of contaminated harbor sediments stabilized with hydraulic binders and the determination of remediation endpoints require the determination of pollutants leaching potentials. Moreover, little information about the speciation and mobility of inorganic contaminants in these specific solid matrices is available in the literature. The objective of this paper is to investigate the relationship between mineralogy and leachability of contaminants (copper, lead, and zinc) present in a French harbor sediment stabilized with quicklime and Portland cement. Batch equilibrium leaching tests at various pH, chemical analysis of leachates, and mineralogical studies (X-ray diffraction, scanning electron microscopy–energy dispersive spectroscopy, and diffuse reflectance infrared Fourier transform) have been combined in the present investigation. The acid neutralization capacity of the stabilized matrix studied is first controlled by the dissolution of portlandite (pH?~12), followed by the dissolution of C–S–H (pH?~11) and the dissolution of ettringite (pH?~10). Finally, a very high buffering capacity of this stabilized sediment is observed for pH values around 6. This equilibrium is mainly controlled by the dissolution of iron sulfides and carbonate minerals. Consequently, the mobilization of inorganic contaminants as a function of pH remains very low (<0.1 wt%) for pH values above 6 and significantly increases for pH below these values. This research confirms the importance of a combined methodology for the intrinsic characterization of potential mobilization of contaminants in a stabilized sediment and for a better understanding of geochemical processes that affect contaminant fate, transformation, and transport in the subsurface environment.     

Anaerobic digestion of organic fraction of municipal solid waste combining two pretreatment modalities, high temperature microwave and hydrogen peroxide

In order to enhance anaerobic digestion (AD) of the organic fraction of municipal solid waste (OFMSW), pretreatment combining two modalities, microwave (MW) heating in presence or absence of hydrogen peroxide (H₂O₂) were investigated. The main pretreatment variables affecting the characteristics of the OFMSW were temperature (T) via MW irradiation and supplemental water additions of 20% and 30% (SWA20 and SW30). Subsequently, the focus of this study was to evaluate mesophilic batch AD performance in terms of biogas production, as well as changes in the characteristics of the OFMSW post digestion. A high MW induced temperature range (115-175 °C) was applied, using sealed vessels and a bench scale MW unit equipped with temperature and pressure controls. Biochemical methane potential (BMP) tests were conducted on the whole OFMSW as well as the liquid fractions. The whole OFMSW pretreated at 115 °C and 145 °C showed 4-7% improvement in biogas production over untreated OFMSW (control). When pretreated at 175 °C, biogas production decreased due to formation of refractory compounds, inhibiting the digestion. For the liquid fraction of OFMSW, the effect of pretreatment on the cumulative biogas production (CBP) was more pronounced for SWA20 at 145 °C, with a 26% increase in biogas production after 8 days of digestion, compared to the control. When considering the increased substrate availability in the liquid fraction after MW pretreatment, a 78% improvement in biogas production vs. the control was achieved. Combining MW and H₂O₂ modalities did not have a positive impact on OFMSW stabilization and enhanced biogas production. In general, all samples pretreated with H₂O₂ displayed a long lag phase and the CBP was usually lower than MW irradiated only samples. First order rate constant was calculated.     

Bioavailability to rats of 14C‐lindane residues in stored potato tubers

Abstract

Potato tubers were applied with radiolabelled lindane (U‐¹⁴C γ‐ 1,2,3,4,5,6 hexachlorocyclohexane) at three dose levels 30, 150, and 300 ppm and stored for 30, 60 and 90 days at room temperature. The data revealed that lindane penetrated into the pulp tissues through the epidermal layer. The amounts recovered in the peel were found to increase with a greater storage period up to 60 days followed by a drop at 90 days. On the other hand, there was a slight increase in radioactivity in the pulp tissue from 30 to 60 days followed by significant increase after 90 days. The incorporation of the compound in the tubers was dose independent. Methanol extraction showed binding of about 8.1% and 5.8% ofthe applied dose in peel and pulp tissues, respectively. The insecticide was found to be bioavailable when rats health hazard. It is therefore, desirable to demonstrate that the quantity of the terminal residues may be safe for the consumer. In the present investigation an attempt was made to determine the fate and bioavailability of lindane when applied to stored potato tubers.     

Effect and mechanism of action of methomyl and cypermethrin insecticides on kynurenine metabolizing enzymes of mouse liver

Abstract

The effect of methomyl and cypermethrin insecticides on the B₆‐dependent kynurenine hydrolase(KH) and kynurenine aminotransferase (KATE) was studied. These insecticides induced pronounced inhibition on the (KH) and (KATE) enzymes after single dose treatment. Repeated doses of methomyl induced inhibition on the (KH) and (KATE) activities, whereas repeated treatment with cypermethrin had no effect on the activities of these enzymes. In vitro methomyl inhibited (KH) and (KATE) enzymes at 10 M up to 10^‐3 M, through a competitive mechanism. Methomyl and cypermethrin are capable of causing alterations in the kynurenine metabolizing enzymes of mouse liver.     

A method for scaling biological response of soil microcosms

An extensive series of laboratory experiments was conducted in soil microcosms to study the respiratory response of microorganisms to toxicant amendments within different types of soils. Our analysis of test results demonstrates that coupled biological and environmental factors within soil can be scaled (i.e., commensurably and analogously grouped) by means of two rate constants, one characterizing the diffusion of CO₂ in the soil matrix and another the biological production of CO₂. The two rate constants were used to classify the impact of metal compounds on diverse soil types and to predict the loss or gain of total respiratory CO₂ of amended soils relative to intact soils. This method exemplifies a more general approach, potentially useful for scaling complex physical and biological interactions in environmental assessments.     

Transfer of radionuclides in aquatic ecosystems--default concentration ratios for aquatic biota in the Erica Tool

The process of assessing risk to the environment following a given release of radioactivity requires the quantification of activity concentrations in environmental media and reference organisms. The methodology adopted by the ERICA Integrated Approach involves the application of concentration ratios (CR values) and distribution coefficients (K(d) values) for aquatic systems. Within this paper the methodologies applied to derive default transfer parameters, collated within the ERICA Tool databases, are described to provide transparency and traceability in the documentation process. Detailed information is provided for the CR values used for marine and freshwater systems. Of the total 372 CR values derived for the marine ecosystem, 195 were identified by literature review. For the freshwater system, the number of values based on review was less, but still constituted 129 from a total of 372 values. In both types of aquatic systems, 70-80% of the data gaps have been filled by employing "preferable" approaches such as those based on substituting values from taxonomically similar organisms or biogeochemically similar elements.     

Pattern formation and individual-based models: The importance of understanding individual-based movement

This paper demonstrates that while pattern formation can stabilize individual-based models of predator–prey systems, the same individual-based models also allow for stabilization by alternate mechanisms, particularly localized consumption or diffusion limitation. The movement rules of the simulation are the critical feature which determines which of these mechanisms stabilizes any particular predator–prey individual-based model. In particular, systems from well-connected subpopulations, in each of which a predator can attack any prey, generally exhibit stabilization by pattern formation. In contrast, when restricted movement within a (sub-)population limits the ability of predators to consume prey, localized consumption or diffusion limitation can stabilize the system. Thus while the conclusions from differential equations on the role of pattern formation for stability may apply to discrete and noisy systems, it will take a detailed understanding of movement and scales of interaction to examine the role of pattern formation in real systems. Additionally, it will be important to link an understanding of both foraging and inter-patch movement, since by analogy to the models, both would be critical for understanding how real systems are stabilized by being discrete and spatial.