Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modelling

Collection of municipal solid waste (MSW) may account for more than 70% of the total waste management budget, most of which is for fuel costs. It is therefore crucial to optimise the routing network used for waste collection and transportation. This paper proposes the use of geographical information systems (GIS) 3D route modelling software for waste collection and transportation, which adds one more degree of freedom to the system and allows driving routes to be optimised for minimum fuel consumption. The model takes into account the effects of road inclination and vehicle weight. It is applied to two different cases: routing waste collection vehicles in the city of Praia, the capital of Cape Verde, and routing the transport of waste from different municipalities of Santiago Island to an incineration plant. For the Praia city region, the 3D model that minimised fuel consumption yielded cost savings of 8% as compared with an approach that simply calculated the shortest 3D route. Remarkably, this was true despite the fact that the GIS-recommended fuel reduction route was actually 1.8% longer than the shortest possible travel distance. For the Santiago Island case, the difference was even more significant: a 12% fuel reduction for a similar total travel distance. These figures indicate the importance of considering both the relief of the terrain and fuel consumption in selecting a suitable cost function to optimise vehicle routing.     

Five years of formaldehyde and acetaldehyde monitoring in the Rio de Janeiro downtown area – Brazil

The fuel matrix used in Brazil is unique around the world. The intensive use of hydrated ethanol, gasohol (gasoline with 25% v/v of ethanol), compressed natural gas (CNG), and biodiesel leads to a peculiar composition of the urban atmosphere. From 1998 to 2002 an increase in formaldehyde levels was observed and since then, a reduction. This work presents a monitoring campaign that was executed from March 2004 to February 2009 by sampling at early morning on every sunny Wednesday for a total of 183 samples. The results indicate a strong reduction in formaldehyde levels from 2004 (average of 135.8 μg m^?3 with SD 28.4 μg m^?3) to 2009 (average of 49.3 μg m^?3 with SD 27.4 μg m^?3). The levels of acetaldehyde showed a slight reduction from 2004 (average of 34.9 μg m^?3 with SD 8.0 μg m^?3) to 2009 (average of 26.8 μg m^?3 with SD 11.5 μg m^?3). Comparing the results with the concurrent evolution of the fleet and of fuel composition indicates that the observed formaldehyde levels could be associated with the increase in ethanol use and in CNG use by engines with improved technology over the first converted CNG engines. Modelling studies using the OZIPR trajectory model and the SAPRC chemical mechanism indicate that formaldehyde is the main ozone precursor in Rio de Janeiro and acetaldehyde is the forth one.     

Conductive-diamond electrochemical oxidation of chlorpyrifos in wastewater and identification of its main degradation products by LC-TOFMS

The electrochemical transformation of the organophosphorous insecticide chlorpyrifos (CPF) was investigated in wastewater. The oxidation of CPF was carried out in a single-compartment electrochemical flow cell working under batch operation mode, using diamond-based material as anode and stainless steel as cathode. In order to evaluate its persistence and degradation pathway, two different concentration levels (1.0 mg L⁻¹ and 0.1 mg L⁻¹) were studied. Liquid chromatography/mass spectrometry was used for evaluation of the initial and electrolyzed solutions. The identification of CPF transformation products was performed by liquid chromatography-time of flight-mass spectrometry (LC-TOFMS). Results showed that CPF is completely removed at the end of treatment time. Analysis by LC-TOFMS allowed the identification of six degradation products (with Mw 154, 170, 197, 305 321 and 333). Three of the identified intermediates (Mw 170, 305 and 321) were completely removed at the end of electrolysis time. Interestingly, the formation of diethyl 3,5,6-trichloropyridin-2yl phosphate (chlorpyrifos oxon) and 3,5,6-trichloropyridin-2-ol was also found in previous reported degradation pathways using different degradation technologies.     

Potential environmental influence of amino acids on the behavior of ZnO nanoparticles

The fate of nanomaterials when they enter the environment is an issue of increasing concern and thus it is important to know how they interact with natural organic molecules since this may have a significant impact on the particles' behavior. Because of our poor knowledge in this regard, the interaction of ZnO nanoparticles with amino acids of contrasting surface charge, including Histidine (HIS), Glycine (GLY), Aspartic acid (ASP) and Glutamic acid (GLU) which occur commonly in natural habitats, such as the plant root zone, was investigated over a range of pH conditions and concentrations. The addition of the individual amino acid led to significant changes in nanoparticle colloidal zeta potential stability, particle size distribution and the extent of agglomeration. Variations in pH resulted in considerable changes in nanoparticle surface charge and hydrodynamic size. In general, the particle size distribution decreased as the amino acid concentration increased, with more acidic conditions exacerbating this effect. In addition, increased concentrations of amino acids resulted in more stable nanoparticles in aqueous suspensions. Histidine had the greatest effect on colloidal stability, followed by Glycine, Aspartic acid and finally Glutamic acid. This study illustrates how nanoparticle behavior may change in the presence of naturally occurring amino acids, an important consideration when assessing the fate of nanoparticles in the environment. Additionally, utilization of amino acids in industrial processes could reduce particle agglomeration and it could lead to a way of employing more sustainable reagents.     

Monitoring of firefighters exposure to smoke during fire experiments in Portugal

Forest fires represent a serious threat to public security in Europe due to the large burned area. Moreover, smoke pollution due to forest fire events is an important public health issue for the communities directly affected, and particularly for the personnel involved in firefighting operations. Aiming to contribute to the scientific knowledge concerning firefighters exposure to forest fires smoke, data of individual exposure to carbon monoxide, nitrogen dioxide, volatile organic compounds, and particulate matter were obtained during experimental field fires for a group of 10 firefighters equipped with portable “in continuum” measuring devices. Measured values are very high exceeding the Occupational Exposure Standard limits, in particular for peak limit thresholds. These are the first measurements and analysis of firefighter's individual exposure to toxic gases and particles in fire smoke experiments in Europe. However, they already indicate that urgent measures to avoid these levels of exposure are needed.     

Suitability of oil bioremediation in an Artic soil using surplus heating from an incineration facility

A 168-day period field study, carried out in Sisimiut, Greenland, assessed the potential to enhance soil remediation with the surplus heating from an incineration facility. This approach searches a feasible ex situ remediation process that could be extended throughout the year with low costs. Individual and synergistic effects of biostimulation were also tested, in parallel. An interim evaluation at the end of the first 42 days showed that biostimulation and active heating, as separate treatments, enhanced petroleum hydrocarbon (PHC) removal compared to natural attenuation. The coupling of both technologies was even more effective, corroborating the benefits of both techniques in a remediation strategy. However, between day 42 and day 168, there was an opposite remediation trend with all treatments suggesting a stabilization except for natural attenuation, where PHC values continued to decrease. This enforces the “self-purification” capacity of the system, even at low temperatures. Coupling biostimulation with active heating was the best approach for PHC removal, namely for a short period of time (42 days). The proposed remediation scheme can be considered a reliable option for faster PHC removal with low maintenance and using “waste heating” from an incineration facility.     

Cleaner production in the management of water use at a poultry slaughterhouse of Vale do Taquari,Brazil: a case study

This study included the layout characterization for the production process of a poultry slaughterhouse using qualitative and quantitative flow charts for water management; analysis of general parameters for pollution load in the wastewater produced in critical stages of the production process and assessment of environmental impact indicators. Prognoses for cleaner production based on water management were established. The diagnostic stage revealed that the scalding, pre-chilling, separated points of wastewater disposal for the wastewater treatment plant and disposal of treated and non-reused wastewater were critical for water management. Dissolved oxygen depletion and eutrophication account for the major environmental impacts of these wastewaters, resulting in an environmental pressure index of 32.1. The opportunities for cleaner production implementation resulting from this study include the reuse of wastewaters from pre-chilling and chilling for pre-washing of carcasses, since average temperatures of these wastewaters range between 4 and 16 °C. This will contribute to lowering the oil and grease pollution load. Another strategy concerns the standardization of cleaning procedures with rational water use in all work shifts and implementation of water meters on a sector-by-sector basis. In the latter case, which has already been implemented, water consumption was reduced by 13%.