Review of ozone and temperature lidar validations performed within the framework of the Network for the Detection of Stratospheric Change

The use of assimilation tools for satellite validation requires true estimates of the accuracy of the reference data. Since its inception, the Network for Detection of Stratospheric Change (NDSC) has provided systematic lidar measurements of ozone and temperature at several places around the world that are well adapted for satellite validations. Regular exercises have been organised to ensure the data quality at each individual site. These exercises can be separated into three categories: large scale intercomparisons using multiple instruments, including a mobile lidar; using satellite observations as a geographic transfer standards to compare measurements at different sites; and comparative investigations of the analysis software. NDSC is a research network, so each system has its own history, design, and analysis, and has participated differently in validation campaigns. There are still some technological differences that may explain different accuracies. However, the comparison campaigns performed over the last decade have always proved to be very helpful in improving the measurements. To date, more efforts have been devoted to characterising ozone measurements than to temperature observations. The synthesis of the published works shows that the network can potentially be considered as homogeneous within +/-2% between 20-35 km for ozone and +/-1 K between 35-60 km for temperature. Outside this altitude range, larger biases are reported and more efforts are required. In the lower stratosphere, Raman channels seem to improve comparisons but such capabilities were not systematically compared. At the top of the profiles, more investigations on analysis methodologies are still probably needed. SAGE II and GOMOS appear to be excellent tools for future ozone lidar validations but need to be better coordinated and take more advantage of assimilation tools. Also, temperature validations face major difficulties caused by atmospheric tides and therefore require intercomparisons with the mobile systems, at all sites.     

Effect of biogas generation on radon emissions from landfills receiving radium-bearing waste from shale gas development

Dramatic increases in the development of oil and natural gas from shale formations will result in large quantities of drill cuttings, flowback water, and produced water. These organic-rich shale gas formations often contain elevated concentrations of naturally occurring radioactive materials (NORM), such as uranium, thorium, and radium. Production of oil and gas from these formations will also lead to the development of technologically enhanced NORM (TENORM) in production equipment. Disposal of these potentially radium-bearing materials in municipal solid waste (MSW) landfills could release radon to the atmosphere. Risk analyses of disposal of radium-bearing TENORM in MSW landfills sponsored by the Department of Energy did not consider the effect of landfill gas (LFG) generation or LFG control systems on radon emissions. Simulation of radon emissions from landfills with LFG generation indicates that LFG generation can significantly increase radon emissions relative to emissions without LFG generation, where the radon emissions are largely controlled by vapor-phase diffusion. Although the operation of LFG control systems at landfills with radon source materials can result in point-source atmospheric radon plumes, the LFG control systems tend to reduce overall radon emissions by reducing advective gas flow through the landfill surface, and increasing the radon residence time in the subsurface, thus allowing more time for radon to decay. In some of the disposal scenarios considered, the radon flux from the landfill and off-site atmospheric activities exceed levels that would be allowed for radon emissions from uranium mill tailings.

Implications: Increased development of hydrocarbons from organic-rich shale formations has raised public concern that wastes from these activities containing naturally occurring radioactive materials, particularly radium, may be disposed in municipal solid waste landfills and endanger public health by releasing radon to the atmosphere. This paper analyses the processes by which radon may be emitted from a landfill to the atmosphere. The analyses indicate that landfill gas generation can significantly increase radon emissions, but that the actual level of radon emissions depend on the place of the waste, construction of the landfill cover, and nature of the landfill gas control system.     

Neonatal hemochromatosis: management,outcome, and prevention

Neonatal hemochromatosis (NH) is a rare disorder but the most common cause of acute liver failure in neonates. NH is characterized by severe hepatic injury and iron overload and is associated with high perinatal mortality and morbidity rates. NH is often preceded by oligohydramnios and intrauterine growth restriction, suggesting an important impact of NH during fetal life. Stillbirth and prematurity are not uncommon. During the last decade, major discoveries on the etiology of NH have radically changed the management and outcome of this disease. NH is now regarded as an alloimmune disease and is, as such, often referred to as gestational alloimmune liver disease. Antenatal treatment with intravenous immunoglobulins starting at 14 weeks' gestation has been shown to prevent the development of NH in subsequent pregnancies. Postnatal treatment, previously based on the use of anti-oxidants and chelation therapy, has now successfully been replaced by exchange transfusions and intravenous immunoglobulins substitution. This review summarizes the latest discoveries on the etiology of NH and the new recommendations concerning its management and prevention. © 2013 John Wiley & Sons, Ltd.     

An Automated Technique for Delineating and Characterizing Valley-Bottom Settings

Accurate delineation and characterization of valley-bottom settings is crucial to the assessment of the biological and geomorphological components of riverine systems; yet, to date, most valley-bottom mapping endeavors have been done manually. To improve this situation, we developed automated techniques in a Geographic Information System (GIS) for delineating and characterizing valley-bottom settings in river basins ranging in size from approximately 1,000–10,000 km². All procedures were developed with ARC/INFO GIS software and fully automated in Arc Macro Language (AML). The GRID module is required for valley-bottom delineation and slope calculations; whereas characterization (i.e., measuring the width of the valley-bottom zone) requires Coordinate Geometry (COGO) in the ARCEDIT module. The process requires three inputs: a polygon coverage of the analysis area; an arc coverage of its hydrography, and a grid representing its digital elevation. The AML is designed to operate within a wide range of computer memory/disk space options, and it allows users to customize several procedures to match the scale and complexity of a given analysis area with available computer hardware.     

Application of microbial hot spots enhances pesticide degradation in soils

Through transfer of an active, isoproturon degrading microbial community, pesticide mineralization could be successfully enhanced in various soils under laboratory and outdoor conditions. The microbes, extracted from a soil having high native ability to mineralize this chemical, were established on expanded clay particles and distributed to various soils in the form of microbial "hot spots". Both, diffusion controlled isoproturon mass flow towards these "hot spots" (6microg d(-1)) as well as microbial ability to mineralize the herbicide (approximately 5microg d(-1)) were identified as the main processes enabling a multiple augmentation of the native isoproturon mineralization even in soils with heavy metal contamination. Soil pH-value appears to exert an important effect on the sustainability of this process.     

Development and Operational Testing of a Super‐Ensemble Artificial Intelligence Flood‐Forecast Model for a Pacific Northwest River

Coastal catchments in British Columbia, Canada, experience a complex mixture of rainfall‐ and snowmelt‐driven contributions to flood events. Few operational flood‐forecast models are available in the region. Here, we integrated a number of proven technologies in a novel way to produce a super‐ensemble forecast system for the Englishman River, a flood‐prone stream on Vancouver Island. This three‐day‐ahead modeling system utilizes up to 42 numerical weather prediction model outputs from the North American Ensemble Forecast System, combined with six artificial neural network‐based streamflow models representing various slightly different system conceptualizations, all of which were trained exclusively on historical high‐flow data. As such, the system combines relatively low model development times and costs with the generation of fully probabilistic forecasts reflecting uncertainty in the simulation of both atmospheric and terrestrial hydrologic dynamics. Results from operational testing by British Columbia's flood forecasting agency during the 2013‐2014 storm season suggest that the prediction system is operationally useful and robust.     

Benzyl-penicillin (Penicillin G) transformation in aqueous solution at low temperature under controlled laboratory conditions

Antibiotics are released into the environment in a variety of ways: via wastewater effluent as a result of incomplete metabolism in the body after use in human therapy, as runoff after use in agriculture, through improper disposal by private households or hospitals or through insufficient removal by water treatment plants. Unlike in most European countries, in Arctic regions effluents are not suitably treated prior to their release into the aquatic environment. Also, many of the scattered human settlements in remote regions of the Arctic do not possess sewage treatment facilities and pharmaceutical residues therefore enter the aqueous environment untreated. Only limited data are available on the biodegradation of antibiotics under Arctic conditions. However, such information is needed to estimate the potential harm of antibiotics for the environment. Pen-G is used in this study since it is a widely prescribed antibiotic compound whose environmental properties have not yet been investigated in detail. Thus, for a very first assessment, the OECD approved biodegradation Zahn-Wellens test (ZWT, OECD 302 B) was used to study biodegradation and non-biotic elimination of the antibiotic Benzyl-penicillin (Pen-G) at different temperatures (5°C, 12.5°C and 20°C). The testing period was extended from the OECD standard of 28-42d. In addition to dissolved organic carbon (DOC), Pen-G levels and major transformation products were recorded continuously by LC-ion-trap-MS/MS. DOC monitoring revealed considerable temperature dependence for the degradation process of Pen-G. DOC loss was slowest at 5°C and considerably faster at 12.5°C and 20°C. In the initial step of degradation it was found that Pen-G was hydrolyzed. This hydrolyzed Pen-G was subsequently further degraded by decarboxylation, the result of which was 2-(5,5-dimethyl-1,3-thiazolidin-2-yl)-2-(2-phenylacetamido)acetic acid. Furthermore, direct elimination of 2-phenyl-acetaldehyde from the hydrolyzed and decarboxylated Pen-G also led to the formation of 2-[amino(carboxy)methyl]-5,5-dimethyl-1,3-thiazolidone-4-carboxylic acid. Since biodegradation slows down considerably at a low temperature, the resulting transformation products had considerably longer residence times at 5°C compared to higher temperature conditions within the 42-d experiment. The results presented here clearly demonstrate that a risk assessment for pharmaceuticals present in low ambient temperature environments (i.e. the Arctic) cannot be based on test results obtained under standard laboratory conditions (i.e. 20°C ambient temperatures).