Interregional comparison of karst disturbance: West-central Florida and southeast Italy

The karst disturbance index (KDI) consists of 31 environmental indicators contained within the five broad categories: geomorphology, hydrology, atmosphere, biota, and cultural. The purpose of this research is to apply the KDI to two distinct karst areas, west Florida, USA, and Apulia, Italy. Through its application, the utility of the index can be validated and other important comparisons can be made, such as differences in the karst legislations implemented in each region and the effect of time exposure to human occupation to each karst terrain. Humans have intensively impacted the karst of southeast Italy for thousands of years compared to only decades in west-central Florida. However, west-central Florida's higher population density allows the region to reach disturbance levels comparable to those reached over a longer period in Apulia. Similarly, Italian karst is more diverse than the karst found in west-central Florida, creating an opportunity to test all the KDI indicators. Overall, major disturbances for southeast Italy karst include quarrying, stone clearing, and the dumping of refuse into caves, while west-central Florida suffers most from the infilling of sinkholes, soil compaction, changes in the water table, and vegetation removal. The application of the KDI allows a benchmark of disturbance to be established and later revisited to determine the changing state of human impact for a region. The highlighting of certain indicators that recorded high levels of disturbance also allows regional planners to allocate resources in a more refined manner.     

The key role played by the Augusta basin (southern Italy) in the mercury contamination of the Mediterranean Sea

The Augusta basin, located in SE Sicily (southern Italy), is a semi-enclosed marine area, labelled as a highly contaminated site. The release of mercury into the harbour seawater and its dispersion to the blue water, make the Augusta basin a potential source of anthropogenic pollution for the Mediterranean Sea. A mass balance was implemented to calculate the HgT budget in the Augusta basin. Results suggest that an average of ～0.073 kmol of HgT is released, by diffusion, on a yearly basis, from sediments to the seawater, with a consequent output of 0.162 kmol y(-1) to coastal and offshore waters; this makes the Augusta area an important contributor of mercury to the Mediterranean Sea. Owing to the geographical location of the Augusta basin, its outflowing shelf-waters are immediately intercepted by the surface Atlantic Ionian Stream (AIS) and mixed with the main gyres of the eastern Mediterranean Sea, thus representing a risk for the large-scale marine system.     

Mechanochemistry of ibuprofen pharmaceutical

In this paper mechanochemistry has been studied in view of possible application to detoxification of expired pharmaceuticals. The experiments have been carried out with a commercial medication containing ibuprofen ((RS)-2-(4-(2-methylpropyl)phenyl)propanoic acid) which has been submitted to prolonged milling up to 40 h. When Al(OH)₃ is used as co-reagent, the first degradation step induced by the mechanochemical treatment is an acid-base reaction with the ibuprofen carboxylic acid group. The subsequent degradation follows a complex pathway leading to 1-(4-isobutylphenyl)ethanone, 1-isobutyl-4-vinylbenzene and 2-(4-(3-methylbutan-2-yl)phenyl)propan-1-ol after 10 h milling and, in addition, 1-(4-acetylphenyl)-2-methylpropan-1-one, 1-(4-(1-hydroxy-2-methylpropyl)phenyl)ethanone and 1-(4-(2-hydroxy-2-methylpropyl)phenyl)ethanone after 40 h milling. The degradation reaction path and products have been identified by means of FT-IR spectroscopy, thin layer chromatography, NMR spectroscopy, mass spectroscopy and elemental analysis. The observed ibuprofen decarboxylation makes the drug simultaneously lose both its pharmaceutical activity and toxicity.     

A compilation of field surveys on gaseous elemental mercury (GEM) from contrasting environmental settings in Europe,South America,South Africa and China: separating fads from facts

Mercury is transported globally in the atmosphere mostly in gaseous elemental form (GEM, \( {\text{Hg}}_{\text{gas}}^{0} \) ), but still few worldwide studies taking into account different and contrasted environmental settings are available in a single publication. This work presents and discusses data from Argentina, Bolivia, Bosnia and Herzegovina, Brazil, Chile, China, Croatia, Finland, Italy, Russia, South Africa, Spain, Slovenia and Venezuela. We classified the information in four groups: (1) mining districts where this contaminant poses or has posed a risk for human populations and/or ecosystems; (2) cities, where the concentration of atmospheric mercury could be higher than normal due to the burning of fossil fuels and industrial activities; (3) areas with natural emissions from volcanoes; and (4) pristine areas where no anthropogenic influence was apparent. All the surveys were performed using portable LUMEX RA-915 series atomic absorption spectrometers. The results for cities fall within a low GEM concentration range that rarely exceeds 30 ng m^?3, that is, 6.6 times lower than the restrictive ATSDR threshold (200 ng m^?3) for chronic exposure to this pollutant. We also observed this behavior in the former mercury mining districts, where few data were above 200 ng m^?3. We noted that high concentrations of GEM are localized phenomena that fade away in short distances. However, this does not imply that they do not pose a risk for those working in close proximity to the source. This is the case of the artisanal gold miners that heat the Au–Hg amalgam to vaporize mercury. In this respect, while GEM can be truly regarded as a hazard, because of possible physical–chemical transformations into other species, it is only under these localized conditions, implying exposure to high GEM concentrations, which it becomes a direct risk for humans.     

Investigating the influence on safety of retrofitting Italian motorways with barriers meeting a new EU standard

Objective: A new European Union (EU) regulation for safety barriers, which is based on performance, has encouraged road agencies to perform an upgrade of old barriers, with the expectation that there will be safety benefits at the retrofitted sites. The new class of barriers was designed and installed in compliance with the 1998 (European Norm) EN 1317 standards for road restraint systems, which lays down common requirements for the testing and certification of road restraint systems in all countries of the European Committee for Standardization (CEN). Both the older and new barriers are made of steel and are installed in such a way as to avoid vehicle intrusion, but the older ones are thought to be only effective at low speeds and large angles of impact. The new standard seeks to remedy this by providing better protection at higher speeds. This article seeks to quantify the effect on the frequency of fatal and injury crashes of retrofitting motorways with barriers meeting the new standards.

Methods: The estimation of the crash modification was carried out by performing an empirical Bayes before–after analysis based on data from the A18 Messina–Catania motorway in Italy. The methodology has the great advantage to account for the regression to the mean effects. Besides, to account for time trend effects and dispersion of crash data, a modified calibration methodology of safety performance was used.

Results: This study, based on data collected on 76 km of motorway in the period 2000–2012, derived Crash Modification Factor point estimates that indicate reductions of 72% for run-off-road fatal and injury crashes and 38% in total fatal and injury crashes that could be expected by upgrading an old safety barrier by complying with new EU 1317 standards. The estimated benefit-cost ratio of 5.57 for total crashes indicates that the treatment is cost effective.

Conclusions: The magnitude of this benefit indicates that the retrofits are cost-effective even for total crashes and should continue in any European country inasmuch as the estimated Crash Modification Factors are based on treatment sites that are reasonably representative of all European motorways.     

Emergent network structure and initial group performance: The moderating role of pre‐existing relationships

Organization restructurings often put groups of employees into new teams and roles, and it is not unusual for some of these new teammates to have pre‐existing work and friendship relationships. While there has been much theorizing on the impact of existing social network structures on group performance, there has been less research on how pre‐existing relationships help or hinder initial group performance, especially in teams with interdependent roles and tasks. We explore several hypotheses in a competitive management simulation involving 42 teams and find that (1) the density of pre‐existing work and friendship relationships are directly associated with higher initial group performance, and (2) pre‐existing work network density moderates the relationship between emergent work network density and initial group performance. In other words, the degree to which emergent work ties are based on pre‐existing work relationships (i.e., former co‐workers actually work together in their new roles) also contributes to higher initial group productivity. Copyright © 2009 John Wiley & Sons, Ltd.     

An object-based image analysis approach for aquaculture ponds precise mapping and monitoring: a case study of Tam Giang-Cau Hai Lagoon, Vietnam

Monitoring and mapping shrimp farms, including their impact on land cover and land use, is critical to the sustainable management and planning of coastal zones. In this work, a methodology was proposed to set up a cost-effective and reproducible procedure that made use of satellite remote sensing, object-based classification approach, and open-source software for mapping aquaculture areas with high planimetric and thematic accuracy between 2005 and 2008. The analysis focused on two characteristic areas of interest of the Tam Giang-Cau Hai Lagoon (in central Vietnam), which have similar farming systems to other coastal aquaculture worldwide: the first was primarily characterised by locally referred “low tide” shrimp ponds, which are partially submerged areas; the second by earthed shrimp ponds, locally referred to as “high tide” ponds, which are non-submerged areas on the lagoon coast. The approach was based on the region-growing segmentation of high- and very high-resolution panchromatic images, SPOT5 and Worldview-1, and the unsupervised clustering classifier ISOSEG embedded on SPRING non-commercial software. The results, the accuracy of which was tested with a field-based aquaculture inventory, showed that in favourable situations (high tide shrimp ponds), the classification results provided high rates of accuracy (>95 %) through a fully automatic object-based classification. In unfavourable situations (low tide shrimp ponds), the performance degraded due to the low contrast between the water and the pond embankments. In these situations, the automatic results were improved by manual delineation of the embankments. Worldview-1 necessarily showed better thematic accuracy, and precise maps have been realised at a scale of up to 1:2,000. However, SPOT5 provided comparable results in terms of number of correctly classified ponds, but less accurate results in terms of the precision of mapped features. The procedure also demonstrated high degrees of reproducibility because it was applied to images with different spatial resolutions in an area that, during the investigated period, did not experience significant land cover changes.