重金属由衣菌到尾核草履虫的生物选择传递

衣菌是存在于污水中的细菌,己发现它能吞食锌、铝、镍和锰。该细菌的含金属培养物又被用来饲养原生动物尾核尊履虫、并且分析结果揭示了对锌、铝和镍的蓄积作用。在这一研究中,因为衣菌是草履虫的唯一食料源,所以此结果表明那些痕量金属是通过一种捕食与被捕食的关系,是经由细菌转移到原虫的。     

Measuring agricultural sustainability in terms of efficiency: the case of Dutch sugar beet growers

Sustainability embraces socio-economic and bio-ecological dimensions or attributes. This paper presents a conceptual framework for quantifying sustainability on the basis of efficiency theory commonly used in economics. The conceptual model is implemented using Data Envelopment Analysis (DEA). Sustainability is measured for a sample of Dutch sugar beet growers. The average technical efficiency was only 50%. A positive correlation was found between technical efficiency and sustainable efficiency. Differences in efficiency among farmers were persistent within and between years. We conclude that there is considerable scope for improving the sustainability of arable farming by better management.     

在企业开展有效的职业安全健康管理体系

挪威船级社(Det Norske Veritas,简称DNV)是一个有138年历史的、从事安全管理和安全技术方面的组织。它成立于1864年,最初的目的是在国际贸易中保证挪威船只有足够的安全标准。DNV的目标始终是:保护生命、财产和环境。DNV的活动初期集中海运部分,但随着挪威成为工业化国家,现已扩展到大部分工业部门,特别是国际原油和天然气工业。今天我们的非海运服务占工业总业务的65％,但仍是世界上第四大船级社。     

论地膜污染与防治对策

随着地膜覆盖栽培年限的延长，由于残膜回收率低，土壤中残膜量逐步增加，造成地膜污染。通过分析地膜污染对环境和农作物产生的危害，对回收残膜存在的问题，总结出了防治地膜污染的对策与措施。     

世界标准日祝词

1992年ISO/IEC世界标准日的主题是强调国际标准化在变化着的世界经济秩序中对新老贸易伙伴的重要性。当今,开放市场是新的贸易环境和提高生活水平的命脉。 在区域范围内或世界范围内消除贸易壁垒,都意味着各国之间的贸易关系更加扩大更加广泛。当政治壁垒垮掉时,对成功的贸易来说,技术要求——无论是以前就有的,还是新产生的——都变得更加显著。同时,全球商业需要那些有助于贸易效率的国际标准,这已为越来越多的技术界人士所公认。     

Preliminary evaluation of PAH sorptive changes in soil by Soxhlet extraction

This study was conducted to evaluate the influence of sorbent modification by synthetic, chemical/thermal weathering on the sorptive behavior of polycyclic aromatic hydrocarbons (PAHs). A clean sandy-clay-loam soil was subjected to Soxhlet extraction and PAH sorptive phenomena were evaluated based on quantity and quality changes in soil organic matter (SOM) and clay minerals. Critical changes in sorption capacity were found to depend on the initial PAH concentrations. Above 7 mg/l, weathering increased the PAH in comparison to that of unmodified soil, whereas it decreased when applied below this concentration. Similarly, less PAH was desorbed from the altered soil when PAH was applied above 7 mg/l. Therefore, when PAH was applied below 7 mg/l, quantitative reduction of sorbent amount (i.e., SOM and clay minerals) by soil weathering governed PAH sorptive behavior. However, when the PAH was applied above the critical limit, qualitative modifications in the sorbents facilitated an opposite trend. Sorbent swelling, removal of competing compounds, and possible changes in surface characteristics by Soxhlet extraction, together with increased concentration gradient effects were factors that resulted in dissimilar PAH sorptive phenomena, pivoting at the critical concentration.     

Influence of seat foam and geometrical properties on BioRID P3 kinematic response to rear impacts

As the primary interface with the human body during rear impact, the automotive seat holds great promise for mitigation of Whiplash Associated Disorders (WAD). Recent research has chronicled the potential influence of both seat geometrical and constitutive properties on occupant dynamics and injury potential. Geometrical elements such as reduced head to head restraint, rearward offset, and increased head restraint height have shown strong correlation with reductions in occupant kinematics. The stiffness and energy absorption of both the seating foam and the seat infrastructure are also influential on occupant motion; however, the trends in injury mitigation are not as clear as for the geometrical properties. It is of interest to determine whether, for a given seat frame and infrastructure, the properties of the seating foam alone can be tailored to mitigate WAD potential. Rear impact testing was conducted using three model year 2000 automotive seats (Chevrolet Camaro, Chevrolet S-10 pickup, and Pontiac Grand Prix), using the BioRID P3 anthropometric rear impact dummy. Each seat was distinct in construction and geometry. Each seat back was tested with various foams (i.e., standard, viscoelastic, low or high density). Seat geometries and infrastructures were constant so that the influence of the seating foams on occupant dynamics could be isolated. Three tests were conducted on each foam combination for a given seat (total of 102 tests), with a nominal impact severity of Delta V = 11 km/h (nominal duration of 100 msec). The seats were compared across a host of occupant kinematic variables most likely to be associated with WAD causation. No significant differences (p < 0.05) were found between seat back foams for tests within any given seat. However, seat comparisons yielded several significant differences (p < 0.05). The Camaro seat was found to result in several significantly different occupant kinematic variables when compared to the other seats. No significant differences were found between the Grand Prix and S-10 seats. Seat geometrical characteristics obtained from the Head Restraint Measuring Device (HRMD) showed good correlation with several occupant variables. It appears that for these seats and foams the head-to-head restraint horizontal and vertical distances are overwhelmingly more influential on occupant kinematics and WAD potential than the local foam properties within a given seat.     

Real-time, high-resolution quantitative measurement of multiple soil gas emissions: selected ion flow tube mass spectrometry

A new technique is presented for the rapid, high-resolution identification and quantification of multiple trace gases above soils, at concentrations down to 0.01 microL L(-1) (10 ppb). The technique, selected ion flow tube mass spectrometry (SIFT-MS), utilizes chemical ionization reagent ions that react with trace gases but not with the major air components (N2, O2, Ar, CO2). This allows the real-time measurement of multiple trace gases without the need for preconcentration, trapping, or chromatographic separation. The technique is demonstrated by monitoring the emission of ammonia and nitric oxide, and the search for volatile organics, above containerized soil samples treated with synthetic cattle urine. In this model system, NH3 emissions peaked after 24 h at 2000 nmol m(-2) s(-1) and integrated to approximately 7% of the urea N applied, while NO emissions peaked about 25 d after urine addition at approximately 140 nmol m(-2) s(-1) and integrated to approximately 10% of the applied urea N. The monitoring of organics along with NH3 and NO was demonstrated in soils treated with synthetic urine, pyridine, and dimethylamine. No emission of volatile nitrogen organics from the urine treatments was observed at levels >0.01% of the applied nitrogen. The SIFT method allows the simultaneous in situ measurement of multiple gas components with a high spatial resolution of < 10 cm and time resolution <20 s. These capabilities allow, for example, identification of emission hotspots, and measurement of localized and rapid variations above agricultural and contaminated soils, as well as integrated emissions over longer periods.     

Selective leaching of valuable metals from waste printed circuit boards

This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H2SO4 and 0.2 M H2O2 at 85 degrees C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 degrees C with a leaching solution of 0.2 M (NH4)2S2O3, 0.02 M CuSO4, and 0.4 M NH4OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature.