Polybrominated diphenyl ether (PBDE) levels in dust from previously owned automobiles at United States dealerships

The levels of BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 were determined in the dust sampled from 60 automobiles that were available for resale at U.S. dealerships. The dominant congener in automobile dust was BDE-209 comprising 95% of the total PBDE levels with a median level of 48.1 µg g^? 1. Statistical analysis of the vehicle attributes indicates that the BDE-209 levels are different (p < 0.05) with respect to groupings by vehicle model year, vehicle manufacturer, and the country of manufacture. Vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE formulation. While DecaBDE use is banned in Maine and Washington and is targeted for restriction in the near future by six U.S. states, vehicles and airplanes are exempt from the ban. It is anticipated that the human exposure potential to PBDEs from automobile dust ingestion will continue for an indefinite future period in the U.S. population.     

Cancer risk assessment of selected hazardous air pollutants in Seattle

The risk estimates calculated from the conventional risk assessment method usually are compound specific and provide limited information for source-specific air quality control. We used a risk apportionment approach, which is a combination of receptor modeling and risk assessment, to estimate source-specific lifetime excess cancer risks of selected hazardous air pollutants. We analyzed the speciated PM(2.5) and VOCs data collected at the Beacon Hill in Seattle, WA between 2000 and 2004 with the Multilinear Engine to first quantify source contributions to the mixture of hazardous air pollutants (HAPs) in terms of mass concentrations. The cancer risk from exposure to each source was then calculated as the sum of all available species' cancer risks in the source feature. We also adopted the bootstrapping technique for the uncertainty analysis. The results showed that the overall cancer risk was 6.09 x 10(-5), with the background (1.61 x 10(-5)), diesel (9.82 x 10(-6)) and wood burning (9.45 x 10(-6)) sources being the primary risk sources. The PM(2.5) mass concentration contributed 20% of the total risk. The 5th percentile of the risk estimates of all sources other than marine and soil were higher than 110(-6). It was also found that the diesel and wood burning sources presented similar cancer risks although the diesel exhaust contributed less to the PM(2.5) mass concentration than the wood burning. This highlights the additional value from such a risk apportionment approach that could be utilized for prioritizing control strategies to reduce the highest population health risks from exposure to HAPs.     

Assessment of surface area normalisation for interpreting distribution coefficients (Kd) for uranium sorption

Adsorption of radionuclides on soils and sediments is commonly quantified by distribution coefficients (K_d values). This paper examines the relationship between K_d values for uranium(VI) adsorption and the specific surface area (SSA) of geologic materials. We then investigate the potential applicability of normalising uranium (U) K_d measurements using the SSA, to produce ‘K_a values’ as a generic expression of the affinity of U for the surface. The data for U provide a reasonably coherent set of K_a values on various solid phases, both with and without ligands. The K_a representation provides a way of harmonising datasets obtained for materials having different specific surface areas, and accounting for the effects of ligands in different systems. In addition, this representation may assist in developing U sorption models for complex materials. However, a significant limitation of the K_a concept is that sorption of radionuclides at trace levels can be dominated by interactions with specific surface sites, whose abundances are not reflected by the SSA. Therefore, calculated K_a values should be interpreted cautiously.     

Direct coupling of a genome-scale microbial in silico model and a groundwater reactive transport model

The activity of microorganisms often plays an important role in dynamic natural attenuation or engineered bioremediation of subsurface contaminants, such as chlorinated solvents, metals, and radionuclides. To evaluate and/or design bioremediated systems, quantitative reactive transport models are needed. State-of-the-art reactive transport models often ignore the microbial effects or simulate the microbial effects with static growth yield and constant reaction rate parameters over simulated conditions, while in reality microorganisms can dynamically modify their functionality (such as utilization of alternative respiratory pathways) in response to spatial and temporal variations in environmental conditions. Constraint-based genome-scale microbial in silico models, using genomic data and multiple-pathway reaction networks, have been shown to be able to simulate transient metabolism of some well studied microorganisms and identify growth rate, substrate uptake rates, and byproduct rates under different growth conditions. These rates can be identified and used to replace specific microbially-mediated reaction rates in a reactive transport model using local geochemical conditions as constraints. We previously demonstrated the potential utility of integrating a constraint-based microbial metabolism model with a reactive transport simulator as applied to bioremediation of uranium in groundwater. However, that work relied on an indirect coupling approach that was effective for initial demonstration but may not be extensible to more complex problems that are of significant interest (e.g., communities of microbial species and multiple constraining variables). Here, we extend that work by presenting and demonstrating a method of directly integrating a reactive transport model (FORTRAN code) with constraint-based in silico models solved with IBM ILOG CPLEX linear optimizer base system (C library). The models were integrated with BABEL, a language interoperability tool. The modeling system is designed in such a way that constraint-based models targeting different microorganisms or competing organism communities can be easily plugged into the system. Constraint-based modeling is very costly given the size of a genome-scale reaction network. To save computation time, a binary tree is traversed to examine the concentration and solution pool generated during the simulation in order to decide whether the constraint-based model should be called. We also show preliminary results from the integrated model including a comparison of the direct and indirect coupling approaches and evaluated the ability of the approach to simulate field experiment.     

Reproduction, larval growth, and reproductive development in African clawed frogs (Xenopus laevis) exposed to atrazine

Reproductive success and development of F2 offspring from F1 adult African clawed frogs (Xenopus laevis) exposed to atrazine throughout larval development and as sexually mature adults was examined. Larval X. laevis were exposed to one of four nominal concentrations of atrazine (0, 1, 10, 25 microg atrazine/l) beginning 96 hr after fertilization and continuing through two years post-metamorphosis. Clutch size and survival of offspring were used as measurement endpoints to gauge reproductive success of the F1 frogs. Larval survivorship and time to metamorphosis were used to gauge developmental success of the F2 offspring from atrazine-exposed frogs. Testes in F1 and F2 frogs were examined for incidence of anomalies, such as testicular ovarian follicles, and sex ratios in F2 offspring were investigated to determine if exposure to atrazine caused trans-generational effects (effects on F2 individuals due to exposure of F1 individuals). There were no effects of any of the studied concentrations of atrazine on clutch size of F1 frogs. There were also no effects on hatching success or time to metamorphosis. Sex ratios did not differ between F2 offspring among treatments. There was no evidence to suggest a transgenerational effect of atrazine on spawning success or reproductive development of X. laevis. This is consistent with the presence of robust populations of X. laevis in areas where they are exposed to atrazine that has been used for several decades for weed control in production of corn. Our observations also are consistent with the results of most other studies of frogs where no effects were found to be associated with exposure to atrazine. Our data do not support the hypothesis that atrazine significantly affects reproductive fitness and development of frogs.     

Thirty years of land-cover change in Bolivia

Land-cover change in eastern lowland Bolivia was documented using Landsat images from five epochs for all landscapes situated below the montane tree line at approximately 3000 m, including humid forest, inundated forest, seasonally dry forest, and cloud forest, as well as scrublands and grasslands. Deforestation in eastern Bolivia in 2004 covered 45,411 km2, representing approximately 9% of the original forest cover, with an additional conversion of 9042 km2 of scrub and savanna habitats representing 17% of total historical land-cover change. Annual rates of land-cover change increased from approximately 400 km2 y(-1) in the 1960s to approximately 2900 km2 y(-1) in the last epoch spanning 2001 to 2004. This study provides Bolivia with a spatially explicit information resource to monitor future land-cover change, a prerequisite for proposed mechanisms to compensate countries for reducing carbon emissions as a result of deforestation. A comparison of the most recent epoch with previous periods shows that policies enacted in the late 1990s to promote forest conservation had no observable impact on reducing deforestation and that deforestation actually increased in some protected areas. The rate of land-cover change continues to increase linearly nationwide, but is growing faster in the Santa Cruz department because of the expansion of mechanized agriculture and cattle farms.     

CCA-treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal

Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. Although some countries have banned the use of the product for some applications, others have not, and the product continues to enter the waste stream from construction, demolition and remodeling projects. CCA-treated wood as a solid waste is managed in various ways throughout the world. In the US, CCA-treated wood is disposed primarily within landfills; however some of the wood is combusted in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, sometimes including CCA-treated wood, is combustion for the production of energy. This paper presents an estimate of the quantity of CCA-treated wood entering the disposal stream in the US, as well as an examination of the trade-offs between landfilling and WTE combustion of CCA-treated wood through a life-cycle assessment and decision support tool (MSW DST). Based upon production statistics, the estimated life span and the phaseout of CCA-treated wood, recent disposal projections estimate the peak US disposal rate to occur in 2008, at 9.7 million m(3). CCA-treated wood, when disposed with construction and demolition (C&D) debris and municipal solid waste (MSW), has been found to increase arsenic and chromium concentrations in leachate. For this reason, and because MSW landfills are lined, MSW landfills have been recommended as a preferred disposal option over unlined C&D debris landfills. Between landfilling and WTE for the same mass of CCA-treated wood, WTE is more expensive (nearly twice the cost), but when operated in accordance with US Environmental Protection Agency (US EPA) regulations, it produces energy and does not emit fossil carbon emissions. If the wood is managed via WTE, less landfill area is required, which could be an influential trade-off in some countries. Although metals are concentrated in the ash in the WTE scenario, the MSW landfill scenario releases a greater amount of arsenic from leachate in a more dilute form. The WTE scenario releases more chromium from the ash on an annual basis. The WTE facility and subsequent ash disposal greatly concentrates the chromium, often oxidizing it to the more toxic and mobile Cr(VI) form. Elevated arsenic and chromium concentrations in the ash leachate may increase leachate management costs.     

Evaluating Change in Rangeland Condition using Multitemporal AVHRR Data and Geographic Information System Analysis

Coarse-scale, multitemporal satellite image data were evaluated as a tool for detecting variation in vegetation productivity, as a potential indicator of change in rangeland condition in the western U.S. The conterminous U.S. Advanced Very High Resolution Radiometer (AVHRR) biweekly composite data set was employed using the six-year time series 1989–1994. Normalized Difference Vegetation Index (NDVI) image bands for the state of New Mexico were imported into a Geographic Information System (GIS) for analysis with other spatial data sets. Averaged NDVI was calculated for each year, and a series of regression analyses were performed using one year as the baseline. Residuals from the regression line indicated 14 significant areas of NDVI change: two with lower NDVI, and 11 with higher NDVI. Rangeland management changes, cross-country military training activities, and increases in irrigated cropland were among the identified causes of change.     

Occurrence of heavy metals and their removal in Perna viridis mussels using chemical methods: a review

Environmental Science and Pollution Research - Despite the nutritional benefits, bivalves like mussels are also an excellent aquatic heavy metal biomonitoring agent due to their high tolerance to...