RECOVERY: A Contaminated Sediment-Water Interaction Model

This paper describes the U.S. Army Corps of Engineers screening-level water quality model (RECOVERY version 3.0) for assessing long-term impacts of contaminated bottom sediments on surface waters. The model couples contaminant interaction between the water column and the bottom sediment, as well as between contaminated and clean bottom sediments. The analysis is intended primarily for organic contaminants with the assumption that the overlying water column is well mixed vertically. The contaminant is assumed to follow linear, reversible, equilibrium sorption and first-order decay kinetics. The system is physically represented as a well-mixed water column (i.e., zero-dimensional) underlain by a vertically-stratified sediment column (i.e., one-dimensional). The sediment is well-mixed horizontally but segmented vertically into a well-mixed surface (active) layer and deep sediment. The deep sediment is segmented into variably contaminated and clean sediment regions. Processes incorporated in the model are sorption, decay, volatilization, burial, resuspension, settling, bioturbation, and pore-water diffusion. The solution couples contaminant mass balance in the water column and in the mixed sediment layer along with diffusion in the deep sediment layers. The model was verified against laboratory and field data, as well as against an analytical solution for the water and mixed sediment layers. These comparisons indicate that the model can be used as an assessment tool for evaluating remediation alternatives for contaminated bottom sediments.     

Assessment of radiological hazard of NORM in Margalla Hills limestone, Pakistan

Studies on naturally occurring radioactive material (NORM) in the limestone from the Margalla Hills have been carried out by measuring gamma activity and to access its radiological implications if any. For data acquisition, a High-Purity Germanium detector was employed. The activity concentrations of (226)Ra, (232)Th, and (40)K were found to be 14.32?±?0.24, 2.05?±?0.04, and 13.80?±?0.20 Bq kg(-1), respectively. These values are relatively lower as compared to that in the limestone of other countries and much lower than the values reported for the natural building stones. The average specific activities due to (226)Ra were found to be higher when compared with (40)K and (232)Th. Indices of radium equivalent activity (Ra(eq)), internal hazard (H(in)), indoor absorbed gamma dose rate (D(R,)), and corresponding annual effective dose (E(eff)) were also determined for the limestone-made rooms. All of these indices were found to be in the lower ranges. The Margalla Hills limestone does not pose any excessive radiological health hazard as a building material and in industrial uses for a common man.     

Spatial and temporal analysis of ground level ozone and nitrogen dioxide concentration across the twin cities of Pakistan

The analyses presented in this paper include the concentration levels of NO₂ and O₃ measured during 2 successive years in twin cities (Rawalpindi and Islamabad) of Pakistan from November 2009 to March 2011. NO₂ was determined using the passive sampling method, while ozone was determined by Model 400E ozone analyzer. The average NO₂ and O₃ concentration in twin cities of Pakistan was found to be 44?±?6 and 18.2?±?1.24 ppb, respectively. Results indicate that the concentration of NO₂ and O₃ show seasonal variations. Results also depict that NO₂ and O₃ concentration levels are high in areas of intense traffic flow and congestion. Rawalpindi has more elevated levels of NO₂ and O₃ as compared to the Islamabad due to the narrow roads, enclosing architecture of road network and congestion. Climatic variables also influenced the NO₂ and O₃ concentration, i.e., temperature is positively related with O₃, while negatively related with NO₂, relative humidity is directly related with NO₂ and inversely related with O₃, whereas rainfall show negative association with both NO₂ and O₃ concentration. Comparing the results with WHO standards reveals that NO₂ concentration levels at all the sampling points are above the permissible limit, while ozone concentration is still lower than the WHO standards. Thus, there is a need to take appropriate steps to control these continuously increasing levels of NO₂ and O₃ before they become a serious hazard for the environment and people living in those areas.     

Assessment of background levels of trace metals in water and soil from a remote region of Himalaya

Selected trace metals were estimated by atomic absorption spectrometry in the water and soil samples collected from the remote region of Himalaya. The soil samples were analysed for soluble and acid extractable fraction of trace metals. In water samples, Ca, Na, Mg and K emerged as dominant contributors, whereas, Ca, Na, K, Mg, Fe and Pb were estimated at comparatively higher levels in the water extract of the soil. In case of acid extract of the soil samples, Ca, K, Fe, Mg, Mn and Na were found at elevated concentrations. Based on mean levels of the metals, following decreasing concentration order was observed in water samples: Ca > Na > Mg > K > Pb > Co > Cu > Zn > Mn > Cr > Fe > Cd > Li, however, in the acid extract of the soil, following order was noted: Ca > K > Fe > Mg > Mn > Na > Pb > Zn > Cr > Li > Cu > Co > Cd. The correlation study revealed appreciably diverse mutual relationships of trace metals in the water and soil samples. The multivariate cluster analyses exhibited divergent apportionment of trace metals in water and soil samples. Among the trace metals, Cd, Pb, Li, Zn, Cr, Cu, Mn and Co exhibited extreme to significant anthropogenic enrichment in the soil samples, while the rest of the metals were mostly contributed by the natural processes.     

Interspecific and locational differences in metal levels in edible fish tissue from Saudi Arabia

Metal levels in fish have been extensively studied, but little data currently exists for the Middle East. We examined the levels of metals and metalloids (aluminum, arsenic, copper, manganese, selenium, zinc, and mercury) in the flesh of 13 fish species collected from three fishing sites and a local fish market in Jeddah, Saudi Arabia. We tested the following null hypotheses: (1) there are no interspecific differences in metal levels, (2) there are no differences in metal levels in fishes between market and fishing sites, (3) there are no size-related differences in metal levels, and (4) there are no differences in selenium:mercury molar ratio among different fish species. There were significant interspecific differences in concentrations for all metals. There was an order of magnitude difference in the levels of aluminum, arsenic, mercury, manganese, and selenium, indicating wide variation in potential effects on the fish themselves and on their predators. Fishes from Area II, close to a large commercial port, had the highest levels of arsenic, mercury, and selenium, followed by market fishes. Mercury was positively correlated with body size in 6 of the 13 fish species examined. Mercury was correlated positively with arsenic and selenium, but negatively with aluminum, cobalt, copper, manganese, and zinc. Selenium:mercury molar ratios varied significantly among species, with Carangoides bajad, Cephalopholis argus, Variola louti, and Ephinephelus tauvina having ratios below 10:1. These findings can be used in risk assessments, design of mercury reduction plans, development of fish advisories to protect public health, and future management decision-making.     

Correction to: Potential revenue and breakeven of energy storage systems in PJM energy markets

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.     

Solar pyrolysis of scrap tire: optimization of operating parameters

Journal of Material Cycles and Waste Management - Pyrolysis of scrap tire using concentrated solar radiation is a novel way to upgrade feedstock. In this investigation, best operating condition for...     

The role of natural resources,globalization, and renewable energy in testing the EKC hypothesis in MINT countries: new evidence from Method of Moments Quantile Regression approach

Environmental Science and Pollution Research - We employ the new Method of Moments Quantile Regression approach to expose the role of natural resources, renewable energy, and globalization in...     

Characterization of Tagaran natural clay and its efficiency for removal of cadmium (II) from Sulaymaniyah industrial zone sewage

Environmental Science and Pollution Research - The fine fraction of the Tagaran natural clay (TC) from the Kurdistan region of Iraq-Sulaimani was characterized and used to remove Cd ions from...     

Numerical investigation of geometrical defect in cold forging of an AUV blade pin head

The precision of cold forging parts becomes critical because the process depends on many factors such as the size and complexity of the parts. Defects negatively affect the assembly accuracy and the performance of the parts. Therefore, defects must be detected and prevented as soon as possible before the manufacturing process begins. The paper intends to investigate the geometrical defect of the cold embossing pin head, which may result in an inaccurate assembly of the blade. In this paper, defect formation was studied using DEFORM-2D based on material flow pattern and stress distribution. The defect was measured in terms of incomplete filling and geometries of the bulging. The effect of the distance to the edge (DTE) is significant to the formation of defects. The size of the bulge is reduced and the filling ability shows better performance as the DTE increases. The FE results are in good agreement with the experimental result.