Unravelling the photoprotective effects of freshwater alga Nostoc commune Vaucher ex Bornet et Flahault against ultraviolet radiations

Environmental Science and Pollution Research - Several studies have suggested the direct relationship between skin complications, air pollution, and UV irradiation. UVB radiations cause various...     

A low pressure direct gas injection system for a four stroke LPG: Diesel dual fuel engine

Internal combustion engines running on gaseous fuels produce low torque because the inducted gaseous fuel displaces air and reduces the volumetric efficiency. This can be overcome by injecting the gaseous fuel directly into the cylinder after the intake of air is completed. This work is a step in developing and demonstrating a cost effective system, as such systems are not readily available for small applications. A low-pressure gas injector was mounted on the cylinder barrel of a fully instrumented dual fuel engine. Its location is such that the injector will be exposed to the cylinder gases about 65.5 degrees before bottom dead center, where the cylinder pressure and temperature will be relatively low. An electronic controller was also developed to time the injection process to occur after the intake valve closes and also to control the duration of injection (quantity). Experiments were conducted with LPG (Liquefied petroleum gas) as the primary fuel that was injected with this new system and diesel as the pilot fuel at the rated speed of 1500 rpm with different amounts of LPG at 80% and 100% load. Comparisons of performance, combustion and emissions with the conventional manifold injection of LPG were done. The system allowed greater amounts of LPG to be used without knock as compared to manifold injection. On the whole the developed system has potential for application in small dual fuel and spark ignited gas engines and can be taken up for further optimization.     

Sodium cyanide-induced modulations in the activities of some oxidative enzymes and metabolites in the fingerlings of Cyprinus carpio (Linnaeus)

Carp fingerlings exposed to a sublethal concentration (0.5?mg?L^?1) of sodium cyanide showed a steady decrement over a 7-day period in respiratory rate, rise in lactate dehydrogenase (LDH), and fall in succinate dehydrogenase (SDH) activities followed by variations in lactic and pyruvate levels. Changes in these enzyme activities might be due to impaired oxidative metabolism and severe cellular damage leading to the release of these enzymes. Decline in the activities of SDH and LDH clearly represents a shift from aerobic to anaerobic metabolism as evidenced by elevated lactate and decline in pyruvate levels. The shift to anaerobic metabolism is also reflected by severe drop in the respiratory rate of the fish. This may be a consequence of the blockage of electron transfer from cytochrome c oxidase to molecular oxygen, thus ceasing cellular respiration and it can lead to cellular hypoxia even in the presence of normal hemoglobin oxygenation. Hence, we indirectly reconfirm the inhibition of oxidative metabolism by sodium cyanide. Alterations in behavioral pattern induced by sublethal sodium cyanide exposure may be due to the combination of cytotoxic hypoxia with lactate acidosis, which depresses the central nervous system (CNS); as the brain is the most sensitive site to anoxia, it results in impaired CNS function.     

Alterations in plasma electrolyte levels of a freshwater fish Cyprinus carpio exposed to acidic pH

The impact of acidification (Low pH 5.0) on plasma electrolytes (Na⁺, K⁺, Cl^?, Ca²⁺, and Mg²⁺) in a freshwater fish Cyprinus carpio was studied for a 35 day (long term) exposure period, while control groups were maintained at neutral pH (7.3). During long-term (35 days) exposure periods, plasma K⁺ and Mg²⁺ levels were increased (77.8% and 16.0%) in the low pH (5.0) treated fish. On the other hand, plasma Na⁺, Cl^?, and Ca²⁺ levels were decreased (12.4%, 18.4% and 31.3%, respectively). The loss of plasma Na⁺, Cl^?, and Ca²⁺ indicates the displacement of Ca²⁺ from tight junctions. The increased plasma K⁺ ion might have resulted from acidosis, because intracellular K⁺ is released from muscle as H⁺ enters. The elevated level of plasma Mg²⁺ might be due to inhibition of active transport of magnesium across the kidneys resulting in the accumulation of this ion in the plasma. Ionic alteration takes place upon exposure to acidic pH and can be considered as a potential tool for detecting environmental stresses caused by acidification.     

Zinc oxide nanoparticles as efficient catalyst for the synthesis of novel di-spiroindolizidine bisoxindoles in aqueous medium

Environmental Chemistry Letters - Developing environmentally benign synthetic protocols such as reaction in water is a major challenge. However, many of the known methods carried out in an...     

Accumulation and translocation of heavy metals in soil and plants from fly ash contaminated area

The present investigation deals with the accumulation of heavy metals in fields contaminated with fly ash from a thermal power plant and subsequent uptake in different parts of naturally grown plants. Results revealed that in the contaminated site, the mean level of all the metals (Cd, Zn, Cr, Pb, Cu, Ni, Mn and Fe) in soil and different parts (root and shoots) of plant species were found to be significantly (p<0.01) higher than the uncontaminated site. The enrichment factor (EF) of these metals in contaminated soil was found to be in the sequence of Cd (2.33) > Fe (1.88) > Ni (1.58) > Pb (1.42) > Zn (1.31) > Mn (1.27) > Cr (1.11) > Cu (1.10). Whereas, enrichment factor of metals in root and shoot parts, were found to be in the order of Cd (7.56) > Fe (4.75) > Zn (2.79) > Ni (2.22) > Cu (1.69) > Mn (1.53) > Pb (1.31) > Cr (1.02) and Cd (6.06) approximately equal Fe (6.06) > Zn (2.65) > Ni (2.57) > Mn (2.19) > Cu (1.58) > Pb (1.37) > Cr (1.01) respectively. In contaminated site, translocation factor (TF) of metals from root to shoot was found to be in the order of Mn (1.38) > Fe (1.27) > Pb (1.03) > Ni (0.94) > Zn (0.85) > Cd (0.82) > Cr (0.73) and that of the metals Cd with Cr, Cu, Mn, Fe; Cr with Pb, Mn, Fe and Pb with Fe were found to be significantly correlated. The present findings provide us a clue for the selection of plant species, which show natural resistance against toxic metals and are efficient metal accumulators.     

Historical pollution trends in coastal environments of India

Seventeen sediment cores were collected from different coastalecosystems of Tamil Nadu, India that include coastal lagoon (Pulicat), polluted rivers in Chennai (Adyar and Cooum), Coral reef (Gulf of Mannar) and a perennial river (Tamiraparani).Radiometric dating has been used to determine the modern sedimentation rates in these ecosystems. The Pulicat Lake and thepolluted rivers (Adyar and Cooum) yield an average sediment accumulation rate of 12.34 and 7.85 mm yr^-1, respectively. Inthe Gulf of Mannar coral reef, the sedimentation rate averages 17.37 mm yr^-1, while the rate in Tamiraparani River is 11.00 mm yr^-1. In the Tamiraparani River basin, the deposition rates were an order of magnitude higher when compared to the erosion rates, which may be due to bank erosion and the intense human activity. In general high rates of sedimentation observed in the coastal ecosystems not only reflect the capacity of the coastal regions as sinks for trace metals but also denoteincreased input of pollutants into the coastal environments in the recent past. The deposition rates of heavy metals – Fe, Mn,Zn, Cu, Cr and Ni in the depth profiles have been computed using sedimentation rates and their distribution is discussed. It can be seen that the mean deposition rates of all the measured elements in the Tamil Nadu coastal ecosystems are high compared with rates determined for the sediments of the deltaic regions ofIndia and the Bay of Bengal.     

Establishment the relationship between water quality parameter and micro plastic concentration for Adyar and Cooum estuary

Increasing micro plastic concentration in the marine environment is a severe threat to the marine ecosystem and indirectly to human society depending on the marine environment. Also, the surface and subsurface water quality parameters are the indicators of the usability of the water sources for human activities. The primary source of micro plastic is the water river systems from land to sea. This study establishes a correlation between water quality parameters and micro plastic concentration to find the most suitable quality parameter for finding the micro plastic concentration in urban coastal estuaries of Chennai coast, Tamil Nadu, India. Twenty samples from Adyar and Cooum estuaries were collected, with ten each on August 2019 and August 2020. They are tested for temperature pH, EC, Turbidity, TDS, DO, BOD, COD, Salinity and micro plastic concentrations. Correlation tests such as Pearson's and Spearman's are performed based on the initial Normality and Homogeneity test. The results show that all the parameters are significantly not correlated with the Micro plastic Concentration, and Micro plastic Concentration is considered an independent factor.     

Efficient water use in industries: cases from the Indian agro-based pulp and paper mills

Agro-based pulp and paper mills in India are one of the most polluting industries; in addition, they are high consumers of raw water. Growing scarcity of high quality freshwater as well as stringent regulatory standards is compelling these units to explore appropriate water management options. Based on data obtained through a questionnaire survey and plant visits, this work provides an overview of the water use and effluent treatment status in Indian agro-residue and recycled pulp and paper mills. The challenges faced by this sector are reviewed and practices adopted by progressive units to minimize freshwater use are illustrated through case studies.     

Influence of arbuscular mycorrhizal fungi on the growth and nutrient status of bermudagrass grown in alkaline bauxite processing residue

A nursery experiment was conducted to evaluate the potential role of arbuscular mycorrhizal (AM) fungi in encouraging the vegetation cover on bauxite residue (red mud) sites. An alkali tolerant bermudagrass (Cynodon dactylon) adapted to local conditions were grown in red mud with different amendments with and without AM fungi to assess mycorrhizal effects on plant growth, mineral nutrition, metal uptake and neutralization of bauxite residue. Inoculation of AM fungi significantly increased the plant growth, nutrient uptake and reduced Fe, Al accumulation in plant tissue and also improved the soil physico-chemical and biochemical properties. Gypsum and sludge amended treatments inoculated with AM fungi had maximum biomass, nutrient uptake and reduced accumulation of metals. The neutralization of red mud was significant in presence of AM fungi than control. The experiment provided evidence for the potential use of bermudagrass in combination with AM fungi for ecological restoration of bauxite residue sites.