Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

石化管道储运员工心理评估结果分析

目的:了解石油管道储运员工的心理健康现状,建立管道储运员工症状自评量表(SCL-90)的群体常模。方法:运用整群抽样方法和症状自评量表(SCL-90)对5544名中国石化管道储运公司员工进行心理健康状况调查,将SCL-90结果与中国常模比较。结果:本次调查心理健康状况好3947人,占71.2%;心理健康状况良好1299人,占23.4%;心理健康状况一般238人,占4.3%;心理健康状况异常60人,占1.1%;石化管道储运员工在躯体化、焦虑、精神病性、阳性项目数均分显著高于全国常模;人际关系、敌对、偏执和精神病性因子均分男性显著高于女性,恐怖因子均分女性显著高于男性;35岁及以上组的躯体化、强迫、抑郁、焦虑、敌对、恐怖、精神病性以及阳性项目数的因子均分均高于35岁以下组;大专组和高中及以下组各项因子均分均显著高于本科及以上组。结论:管道储运员工心理健康状况低于一般人群。年龄相对较大以及学历相对较低员工的心理健康状况是企业关注的重点。     

Building regional priorities in forests for development and adaptation to climate change in the Congo Basin

Indentifying common priorities in shared natural resource systems constitutes an important platform for implementing adaptation and a major step in sharing a common responsibility in addressing climate change. Predominated by discourses on REDD + (Reduced Emissions from Deforestation and Forest Degradation and conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries) with little emphasis on adaptation there is a risk of lack of policy measures in addressing climate change in the Congo Basin. Forest products and ecosystem services provide security portfolios for the predominantly rural communities, and play major roles in national development programmes in both revenue and employment opportunities. Thus, raising the profile of forests in the policy arena especially in the twin roles of addressing climate change in mitigation and adaptation and achieving resilient development is crucial. Within the framework of the Congo Basin Forests and Climate Change Adaptation project (COFCCA) project, science policy dialogue was conducted to identify and prioritize forest based sectors vulnerable to climate change but important to household livelihoods and national development. The goal of the prioritization process was for the development of intervention in forest as measures for climate change adaptation in Central Africa. Participants constituted a wide range of stakeholders (government, Non Governmental Organizations, research institutions, universities, community leaders, private sectors etc.) as representatives from three countries directly involved in the project: Cameroon, Central African Republic and Democratic Republic of Congo. Building on national priorities, four forest related sectors were identified as common priorities at the regional level for focus on climate change adaptation. These sectors included: (1) energy with emphasis on fuel wood and Charcoal; (2) Water principally quality, quantity, accessibility, etc.; (3) Food with emphasis on Non Timber Forest Products, and (4) Health linked to healthcare products (medicinal plants). Using these prioritized sectors, the project focused on addressing the impacts of climate change on local communities and the development of adaptation strategies in the three pilot countries of the Congo Basin region. The four sectors constitute the key for development in the region and equally considered as priority sectors in the poverty reduction papers. Focused research on these sectors can help to inject the role of forests in national and local development and their potentials contributions to climate change adaptation in national and public discourses. Mainstreaming forest for climate change adaptation into national development planning is the key to improve policy coherence and effectiveness in forest management in the region.     

水溶性有机物电子转移能力与荧光峰强度的关系研究

以不同来源的水溶性有机物（DOM）为供试材料,采用电化学方法和荧光光谱法研究了DOM电子转移能力及其与荧光峰强度的关系.采用库仑安培法测定DOM电子转移能力,其中测得的电子接受能力为635.6～1 049.3μmol.（g.C）-1,电子供给能力为27.3～42.3μmol.（g.C）-1.利用循环伏安法研究DOM电化学活性,发现其氧化还原电位在-731～-996 mV（vs.Ag/AgCl）之间.经过电位跃阶法三次氧化还原循环后电子转移能力仍可维持在232.1～897.2μmol.（g.C）-1之间,电子循环率为36.7%～78.2%,说明DOM具有重复利用、反复转移电子的特性.采用荧光激发发射光谱法（EEMS）测定DOM的类富里酸荧光峰强度并比较其与DOM电子转移能力的关系,发现DOM的类富里酸荧光峰强度与DOM的电子循环率具有显著相关（r2=0.92）.实验结果为理解DOM在元素循环、污染物降解以及生物地球化学循环中的作用提供科学依据.     

A juvenile lizard specimen with well-preserved skin impressions from the Upper Jurassic/Lower Cretaceous of Daohugou, Inner Mongolia, China

Lizards are now relatively well known from the Yixian Formation of northeastern China. In this study, we describe a juvenile lizard from a fossil horizon at Daohugou, Inner Mongolia. These beds predate the Yixian Formation, and are probably Late Jurassic or earliest Cretaceous in age. The new specimen thus documents the first lizard material from the Daohugou locality and is the earliest lizard skeleton from China. Comparisons with developmental stages of modern lizards suggest the Daohugou lizard is a hatchling. Although tiny, the specimen is notable in preserving exquisite skin impressions showing the variation in scalation across the body, the shape and position of the cloacal outlet, and details of the manus and pes. These are the earliest recorded lepidosaurian skin traces. In its general proportions and the possession of paired frontals, the small Daohugou lizard resembles both the Yixian taxon Yabeinosaurus tenuis and the questionable Jeholacerta formosa, but it differs from the latter in scalation and, based on other characters, may be distinct from both.     

A new THOR shoulder design: a comparison with volunteers, the Hybrid III, and THOR NT

OBJECTIVE: Since the shoulders are rarely seriously injured in frontal or oblique collisions, they have been given low priority in the development of frontal impact crash test dummies. The shoulder complex geometry and its kinematics are of vital importance for the overall dummy kinematics. The shoulder complex also influences the risk of the safety belt slipping off the shoulder in oblique forward collisions. The first aim of this study was to develop a new 50th percentile male THOR shoulder design, while the second was to compare the new shoulder, mounted on a THOR NT dummy, with volunteer, THOR NT, and Hybrid III range of motion and stiffness data. The third aim was to test the repeatability of the new shoulder during dynamic testing and to see how the design behaves with respect to belt slippage in a 45 degrees far-side collision. METHODS: The new 50th percentile THOR shoulder design was developed with the aid of a shell model of the seated University of Michigan Transportation Research Institute (UMTRI) 50th percentile male with coordinates for joints and bony landmarks (Schneider et al., 1983). The new shoulder design has human-like bony landmarks for the acromion and coracoid processes. The clavicle curvature and length are also made similar to that of a male human, as is the range of motion in the anterior-posterior, superior-inferior, and medial-lateral directions. The new shoulder design was manufactured and tested under the same conditions that T?rnvall et al. (2005b) used to compare the shoulder range of motion for the volunteers, Hybrid III, and THOR Alpha. The new design was also tested in two dynamic test configurations: the first was a 0 degrees full-frontal test and the second was a 45 degrees far-side test. The dummy tests were conducted with an R-16 seat with a three-point belt, the Delta V was 27.0+/-0.5 km/h and the maximum peak acceleration was approximately 14.6+/-0.5 g for each test. RESULTS: A new shoulder design with geometry close to that of humans was developed to be retrofitted to the THOR NT dummy. The results showed that the range of motion for the new shoulder complex during static loading was larger by at least a factor of three, for the maximum load (200 N/arm), than that of either the Hybrid III or the THOR NT; this means it was more similar to the volunteers' range of motion. It was observed that the THOR NT with the new shoulder did not slide out of the shoulder belt during a far-side collision. The performance of the new shoulder was reasonably repeatable and stable during both the static tests and the sled tests. CONCLUSION: A new shoulder for the THOR NT has been designed and developed, and data from static range of motion tests and sled tests indicate that the new shoulder complex has the potential to function in a more human-like manner on the THOR dummy.     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

焦化废水处理工程调试运行研究

针对焦化废水处理调试运行存在的问题,以实际运行中的焦化废水处理工程为例,介绍了其调试运行过程.指出焦化废水调试及稳定运行的控制要点,并提出调试运行过程中可能出现的问题及解决措施,为同类废水的调试和运行提供参考.     

Preparation and microwave absorbing properties of the core-nanoshell composite absorbers with the magnetic fly-ash hollow cenosphere as core

Electromagnetic (EM) wave pollution has become the chief physical pollution for environment. The core-nanoshell composite absorbers with magnetic fly-ash hollow cenosphere as core and nanocrystalline magnetic material as shell were prepared by high-energy ball milling. The results of X-ray diffraction analysis (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and vector network analyzer (VNA) analysis indicated that perfect-crystalline nanomagnetic material coating was gotten with a particle size of 12 nm, being dried at 60°C for 2 hr and calcined at 400°C for 1 hr after ball milling. The exchange-coupling interaction happened between ferrite of cenosphere and soft magnet γ-Fe₂03 coating, it enhances magnetic loss of composite absorbers. In the frequency between 1 MHz and 1 GHz, the absorbing effectiveness of the core-nanoshell composite absorbers can achieve ?30 dB, it is better than single material and is consistent with requirements of the microwave absorbing material at the low-frequency absorption.