液化烃球罐泄漏温度场及材料适应性研究

针对高压储存的液化烃一旦发生泄漏,会迅速气化并吸热,使得球罐温度降低,严重时温度可能低于标准中允许的球罐材质最低适应温度的问题,建立球罐三维物理模型,基于CFD模拟的方法,采用雷诺时均的Navier-Stokes方程和k-ε湍流模型,分析球罐管线发生泄漏时球罐本体及周围环境的温度分布情况,探讨了不同泄漏孔径对球罐温度的影响。研究结果表明球罐发生泄漏时,球罐外部温度会明显降低,由于保温层的存在,球罐本体温度降幅不大。但在泄漏孔附近会形成较小的低温区,超过了16MnR材质的低温承受能力,存在较大的风险。     

活性污泥TB-EPS的絮凝特性研究:絮体的成长、破碎与再凝聚

为了解活性污泥中紧密结合胞外聚合物(tightly bound extracellular polymeric substances,TB-EPS)的絮凝特性,采用激光粒度仪在线监测技术考察了TB-EPS与高岭土生成絮体的过程以及絮体的破碎与再凝聚规律.结果表明,TB-EPS的主要组分为蛋白质和多糖聚合物,增加TB-EPS的投加量,絮体的粒径相应增大,悬浊液的剩余浊度降低.随着絮体破碎-再凝聚次数的增加,絮体的破碎因子升高而恢复因子降低,表明TB-EPS形成的絮体的强度逐渐降低,同时再凝聚的能力也逐渐降低.TB-EPS吸附高岭土的主要作用力为氢键作用,但在絮体形成过程中多糖聚合物之间的纠缠作用和蛋白质成分之间的疏水作用也可能发挥一定的作用.絮体的破碎是侵蚀和破裂同时作用的结果.     

基于超低电容特性的微尘在线监测技术研究

为了更有效地测量工业烟尘排放浓度,研究了一种电容特性的微尘在线监测技术,利用电容传感器输出电压来反映粉尘质量。介绍了电容法测量粉尘量的原理、测量系统组成等,研究了粉尘质量与电容传感器输出电压的关系。对5种不同粉尘的测量结果进行分析表明,粉尘质量与电容传感器输出电压之间存在着一定的比例关系,其相关系数高达0.99。同时进行了微尘在线测量的研究,并采用电容特性曲线对测量系统进行了标定,从而验证了电容法在线微尘监测的可行性。     

阻止杭州湾海底输油管线穿孔、溢油的设想

对海底管线穿孔后如何阻止溢油、减少海上.油污染,提出了采用负压保护的可行性方案.     

钢铁行业大气环境影响评价方法与建议

按钢铁行业大气环评报告书的结构和顺序,结合HJ 2.2-2008《环境影响评价技术导则大气环境》中的相关技术要求,从评价因子、源强、评价等级、大气监测、大气预测、防护距离等方面出发,分析了钢铁行业大气环评中的评价等级确定、大气监测、大气预测等工作中存在的问题,并提出解决方案和建议对策。     

Modification of Ce02-ZrO2 catalyst by potassium for NOx-assisted soot oxidation

Potassium-modified ceria-zirconia catalyst was synthesized by wetness impregnation method. The ageing treatment was performed in static air at 800℃ for 20 hr to evaluate the thermal stability of the catalyst. The catalysts were characterized by X-ray diffraction,BET surface area, oxygen storage capacity, NOx-temperature programmed desorption and soot-temperature programmed oxidation measurements. By introduction of potassium, the maximum soot oxidation rate temperature (Tm) of the ceria-zirconia based catalyst decreased from 525 to 428℃ in the presence of NO under a loose contact mode. The shift of Tm of the K-modified catalyst after ageing is only 15℃. The enhanced activity of the aged catalyst mainly lies in the promotional effect of potassium on the NOx/oxygen storage cacity as well as the soot-catalyst contact.     

火焰原子吸收光谱法测定电镀废水中高浓度的锡

采用盐酸消解样品,用火焰原子吸收光谱法测定电镀废水中高浓度的锡的质量浓度,方法简单可靠。通过实验样品的分析,验证了方法的准确度和精密度。该方法干扰少,数据准确,适合废水分析。     

SCADA系统在污染物治污工况在线监控系统中的应用

本文介绍了SCADA系统在内蒙古自治区重点污染源治污工况在线监控系统中的应用,系统以西门子成熟S7—200系列可编程序控制器为在线监测设备,基于OPC（OLE for Process Control）技术,以WINCC为监控平台,实现了自治区内重点污染源企业治污工况的远程监测、污染物排放的有效管理。     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

上海市环保行政审批系统的设计与实现

上海市环保局行政审批系统采用流程控制和数据传输交换技术,构建了申报系统、审批系统、业务管理系统、跟踪监控系统四部分,实现了包括建设项目环评、固废、辐射等15项行政审批和23项非行政审批事项的“一口受理、一办到底”,通过信息技术实现了外网申报、内网审批,实现了环保审批流程优化再造和审批全过程公开透明,实现了“便民审批”、“高效审批”、“阳光审批”。