Recovery of valuable metals from WPCB fines by centrifugal gravity separation and froth flotation

Journal of Material Cycles and Waste Management - This paper reports physical and physicochemical routes for the recycling of gold, silver, and copper from waste printed circuit boards (WPCBs). The...     

A baseline study characterizing the municipal solid waste in the State of Kuwait

This paper provides a new reference line for municipal solid waste characterization in Kuwait. The baseline data were collected in accordance with the Standard Test Method for the Determination of the Composition of Unprocessed Municipal Solid Waste (ASTM). The results indicated that the average daily municipal waste generation level is 1.01 kg/person. Detailed waste stream surveys were conducted for more than 600 samples of municipal solid waste (MSW). The waste categories included paper, corrugated fibers, PET bottles, film, organic matter, wood, metal, glass, and others. The results indicated that organic waste dominated the characterization (44.4%), followed by film (11.2%) and then corrugated fibers (8.6%). Analysis of variance (ANOVA) was used to investigate the influence of season and governorate on waste composition. A significant seasonal variation was observed in almost all waste categories. In addition, significant differences in proportions between the current level and 1995 baseline were observed in most waste categories at the 95% confidence level.     

Speciative determination of Cr (III) and Cr (VI) in dyeing waste water of Dil Creek discharge to Izmit Gulf (Izmit-Kocaeli, Turkey) by ICP-AES

Wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in wastewater sources from dyeing and tannery has affected the life on earth. This pollution can affect all ecosystems and human health directly or by food chain. Therefore, the determination of chromium in this study is of great importance. Dil Creek is located in the eastern Marmara region and discharges into the Izmit Gulf. This water source is used for irrigation in agriculture and as drinking water for animals. In this study, a rapid, sensitive and selective method for the speciative direct determination of Cr (III) and Cr (VI) in dyeing waste water samples collected from the nearest station to Izmit Gulf of Dil Creek in May 2006 by inductively coupled plasma-atomic emission spectrometry (ICP-AES) has been developed. An analysis of a given sample is completed in about 15 min for ICP-AES the method. As the result of the chromium analysis, the limit of quantification (LOQ) for the Cr (III), Cr (VI) and total Cr were founded as 0.0111 ± 0.0002 mg/l (RSD, 1.80%), 0.0592 ± 0.0010 mg/l (RSD, 1.70%) and 0.0703 ± 0.0020 mg/l (RSD, 2.84%) respectively. In addition, the general mathematical formula has been developed to calculate the concentration of Cr(III), which can be applied to any other metal species. The result of Cr (VI) analysis indicated that water quality of Creek was IV. class quality according to the inland water classification. In order to validate the applied method, recovery studies were performed.     

Assessment of pollution profile in Buyukcekmece Watershed, Turkey

Buyukcekmece Lake located north of the Marmara Sea coast of Turkey is the third largest water resources among the six main reservoirs of a megacity Istanbul, providing 17% water demand. This study aims to investigate the water quality changes in Buyukcekmece Lake and to classify it in accordance to Turkish Water Pollution Control Regulation for inland surface waters, and assess the impacts of the land-use practices, population density, and settlement in the Buyukcekmece watershed. Physical, chemical, and biological quality of Büyükçekmece Lake has been investigated between December 2007 and June 2008 by collecting samples from the Lake and four streams that feed Büyükçekmece Lake. Land use profile maps of the water basin were created by using ARC-GIS to ensure the quality of drinking water. It was determined that the water quality of Büyükçekmece Lake was still of overall second class, implying that it can be used as a safe drinking water resource following a conventional water treatment scheme; however, it is moving toward the third class. Remarkable portion of the pollution in water basin was attributed to domestic wastewater discharges. Agricultural areas that occupy more than half of the water basin have also adversely affected the water quality.     

Evaluation of microbial contamination and distribution of sulphate-reducing bacteria in dental units

Although bacterial contamination is widely researched in dental unit water systems, we have been unable to find any published reports to date about the presence and distribution of sulphate-reducing bacteria (SRB) in dental unit waterlines (DUWLs). The aim of this study was to evaluate microbial contamination and to determine the presence and distribution of SRB in DUWLs. One hundred twenty-three water samples were collected from the air–water syringes, high-speed drills and water sources from 41 dental units in Istanbul, Turkey. The counts of aerobic heterotrophic bacteria and SRB were investigated in the water samples. In addition, the presence of free-living amoebae (FLA) was examined. In this work, we evaluated microbial contamination and reported for the first time the distribution of SRB in DUWLs. We determined that only ten out of 123 water samples were able to meet the American Dental Association’s limit (≤200 CFU ml^− 1). SRB were observed in 102 out of 123 samples (82.9%). In addition, SRB were detected in all of the air–water syringes and high-speed drills. FLA were established in 103 out of 123 samples (83.7%).     

Selection of renewable energy systems sites using the MaxEnt model in the Eastern Mediterranean region in Turkey

Environmental Science and Pollution Research - Global warming has become the center of worldwide environmental concerns, especially in recent years. One of the ways to deal with global warming that...     

A study of the Kazdagi (Mt. Ida) National Park: an ecological approach to the management of tourism

In the field of tourism, where environmental resources are the primary attraction, ecotourism is one of the sustainable approaches now considered as an alternative when considering today's increasing environmental problems. Indeed, according to the World Tourism Organisation, ecotourism is the fastest growing market within the tourist industry. The purpose of this study is to determine tourism activities sensitive to the environment, to help tourism in Turkey and neighbouring countries, and to help spread ecotourism by protecting biological species. The Kazdagi (Mt. Ida) area in Turkey is used as an example and case study.     

The Effect of Acetylation on the Hydrolytic Degradation of PLA/Clay Nanocomposites

In this study, the hydrolytic degradation of Poly(lactic acid) (PLA) and acetylated PLA (PLA-Ac)–clay nanocomposites were investigated. The organo clay was obtained by ion exchange reaction using cetyl tri methyl ammonium bromide (CTAB). Nanocomposites containing 2, 5 and 8% mass ratio of organo clay (CTAB-O) were prepared. PLA and its organo clay nanocomposites were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and X-ray diffraction (XRD) to determine the morphology before and after hydrolytic degradation. Fourier transform infrared (FTIR) analyses of PLA and PLA-Ac were also obtained. The hydrolytic degradation of polymers and their composites were investigated in the phosphate buffered saline solution (PBS). The results showed that controlled hydrolytic degradation was observed in the samples with end group modification of PLA. While weight loss of PLA films was 28%, that of PLA-Ac films was 18% after 60 days degradation time. The weight loss was obtained as 29.5 and 25.5% for PLA-5 wt% organo clay (PLA/5CTAB-O) and PLA-Ac-5 wt% organo clay (PLA-Ac/5CTAB-O) nanocomposites films, respectively. It was also observed that thermal degradation of PLA-Ac was much more than that of PLA. Hydrolytic degradation increased depending on organo clay content. The end group modificated PLA results in controlled hydrolytic degradation. While hydrolytic degradation in polymer films occurred as surface erosion, bulk erosion was observed in composite films.     

Investigation of heavy metal content of Turkish tobacco leaves, cigarette butt, ash, and smoke

A procedure for the determination of cadmium, copper, manganese, and zinc in Turkish tobaccos, which were of different origins, years, and grades, and in the butt, ash, and smoke, which were obtained by smoking the cigarettes that were prepared manually from the said tobaccos in a smoking apparatus, was devised as proposed. The collected samples were digested by wet ashing technique by using HNO₃-HClO₄ and were analyzed by flame atomic absorption spectrometry with satisfactory recoveries (94 % to 98 %). The regression coefficients were above 0.99, and the detection limits were in the range of 0.03–0.12 mg/L^?1. The performance and accuracy of the method was tested by analyzing “Certified Reference Material GBW 08501-Peach Leaves.” The determined values were in agreement with the standard values for the heavy metals analyzed. Thus, it was concluded that the developed method could offer a wide range of application for establishing a relationship between the makeup and composition of tobacco plant, products, ash, smoke, and smoking.