The combined influence of SO2 and heavy metal-containing particulates on beans,carrots and parsley

The effects of various concentrations of air pollutants on crop losses were investigated. Parsley, bean and carrots were fumigated using SO₂ in concentrations ranging from 0.35 mg m^-3 (0.13 ppm) to 4.5 mg m^-3 (1.7 ppm) with and without lead/zinc/cadmium-containing particulate matter. It was concluded that a long-term exposure to low levels of SO₂, even without visible plant injuries, resulted in more significant crop losses than short-term, high concentrations.Measurements of root and leaf weight in carrot and parsley fumigated in exposure chambers with SO₂ show that the ratio of root to leaf weight is dependent on the type and concentration of pollutants. This result leads to the conclusion that a mathematical model describing the above phenomena might be an useful tool in the assessment of crop losses due to known concentrations of air pollutants during the growth period.     

Metal (Cu, Cd and Zn) removal and stabilization during multiple soil washing by saponin

The influence of multiple saponin washing on copper, cadmium and zinc removal and stability in three types of soils (loamy sand, loam, silty clay) was investigated. Distribution of metals and their mobility measured as the ratio of exchangeable form to the sum of all fractions in soils was differential. After single washing the highest efficiency of metal removal was obtained in loamy sand (82-90%) and loam (67-88%), whereas the lowest in silty clay (39-62%). In loamy sand and loam metals had higher mobility factors (44-61% Cu, 60-76% Cd, and 68-84% Zn) compared to silty clay (9% Cu, 28% Cd and 36% Zn). Triplicate washing led to increase both efficiency of metal removal and percentage content of their stable forms.In consequence, fractional patterns for metals before and after treatment changed visibly as a result of their redistribution. Based on the redistribution index, the most stable metal (mainly in residual and organic fractions) after triplicate washing was Cu in loamy sand and loam. For silty clay contaminated with Cd, effective metal removal and its stabilization required a higher number of washings.     

Human bones obtained from routine joint replacement surgery as a tool for studies of plutonium, americium and ⁹⁰Sr body-burden in general public

The paper presents a new sampling method for studying in-body radioactive contamination by bone-seeking radionuclides such as ⁹⁰Sr, ^239+240Pu, ²³⁸Pu, ²⁴¹Am and selected gamma-emitters, in human bones. The presented results were obtained for samples retrieved from routine surgeries, namely knee or hip joints replacements with implants, performed on individuals from Southern Poland. This allowed to collect representative sets of general public samples. The applied analytical radiochemical procedure for bone matrix is described in details. Due to low concentrations of ²³⁸Pu the ratio of Pu isotopes which might be used for Pu source identification is obtained only as upper limits other then global fallout (for example Chernobyl) origin of Pu. Calculated concentrations of radioisotopes are comparable to the existing data from post-mortem studies on human bones retrieved from autopsy or exhumations. Human bones removed during knee or hip joint surgery provide a simple and ethical way for obtaining samples for plutonium, americium and ⁹⁰Sr in-body contamination studies in general public.     

Modeling of adsorption isotherms and kinetics of uranium sorption by magnetic ion imprinted polymers

Application of magnetic U(VI) ion imprinted polymers (IIPs) coated on magnetic nanoparticles was investigated for pre-concentration and determination of U(VI) ions in aqueous solutions. The scanning electron micrographs revealed the microporosity of the adsorbent. Uranium leaching was successful as the energy-dispersive X-ray spectra showed. The Brunauer–Emmett–Teller (BET) surface area improved by more than 13-fold (83.1 and 6.2 m² g^?1 for the leached and unleached magnetic IIP, respectively). U(VI) uptake was optimized using batch experiments with parameters affecting the uptake performance, such as initial uranium concentration, pH, contact time, and adsorbent dose investigated. Pseudo-second-order kinetics and the Langmuir isotherm model best fitted the experimental data. The maximum adsorption capacity of uranium onto the activated magnetic IIP reached 5.4 mg g^?1. The selectivity order was determined to be U(VI) > Ni(II) > Th(IV).     

Application of capillary electrophoresis combined with a modified BCR sequential extraction for estimating of distribution of selected trace metals in PM2.5 fractions of urban airborne particulate matter

The capillary electrophoresis (CE) method combined with a sequential extraction was applied to determine the distribution of Fe, Zn, Cu, Mn and Cd in urban ambient air PM2.5 samples. PM2.5 was collected on Teflon filters with dichotomous sampler, and the modified extraction procedure following the BCR leaching procedure was used to chemically fractionate metals into "easily exchangeable" with water, "acid extractable" with 0.11 mol/l acetic acid, "reducible" with 0.1 mol/l hydroxylamine hydrochloride acidified to pH 2.0 with nitric acid, and "oxidisable" with oxidation by 8.8 mol/l hydrogen peroxide (H2O2) followed by extraction with 1.0 mol/l ammonium acetate. Based on the obtained results it was concluded that the application of the studied methodology provides chemical fractionation data that reflect the general sources and potential health hazards of the studied metals.     

Reliability of a Questionnaire and an Ergonomic Checklist for Assessing Working Conditions and Health at Call Centres

Background. The purpose was to study the test-retest reliability and internal consistency of questions in aquestionnaire concerning working conditions and health and the inter-rater reliability of observations andmeasurements according to an ergonomic checklist. Method. Fifty-seven operators participated in a retestquestionnaire and 58 operators participated in an inter-observer test. Results. The questions had fair to good or higher reliability in 142 of the total of 312. Twenty-seven of the total of 44 variables in the ergonomicchecklist were classified as having fair to good or higher reliability. Conclusions. About half of the questionshad fair to good or higher reliability and can be recommended for further analyses. The majority of variablesin the ergonomic checklist were classified as having fair to good or higher reliability. Low reliability does notnecessarily indicate that the reliability of the test, per se, is low but may signify that the conditions measuredvary over time or that the answers are aggregated in one part of the scale.     

Occupational safety and health as an element of a complex compensation system evaluation within an organization

Occupational safety and health (OSH) plays a significant role in today’s organizations, because it helps in attracting and retaining employees as well as molding their attitudes and behaviors at work. This is why the issue of OSH is stressed in a comprehensive approach to employee rewards: the total reward concept. This article explains how OSH may be included in a complex evaluation process of the compensation system. Although the literature on the effectiveness of employee compensation refers mainly to financial and non-financial components, there is a need for inclusion of working conditions in such analyses. An evaluation of the compensation system that incorporates OSH can drive many benefits for both the organization and employees. Obtaining such benefits, however, requires systematic evaluation of the reward system, including OSH. Incorporation of OSH issue within the comprehensive analysis of compensation systems promotes responsible behavior of all stakeholders.     

The challenges in the identification of Escherichia coli from environmental samples and their genetic characterization

Environmental Science and Pollution Research - Escherichia coli bacteria are an essential indicator in evaluations of environmental pollution, which is why they must be correctly identified. This...