A THEORETICAL FRAMEWORK OF FLOOD INDUCED CHANGES IN URBAN LAND VALUES1

ABSTRACT: By integrating literature from flood hazard research and urban economics a theoretical structure is developed to explain changes in residential land values following flood events. The negative aspects of the flood hazard are shown to be capitalized in the value of the property. It is further suggested that land values (i.e., capitalization) will vary both spatially across the floodplain and temporally depending on the frequency, severity and spatial characteristics of the flood event. Previous work in this area has not addressed the capitalization process explicitly and has not specifically examined the ability of the land market to recover. This may account for the contradictory findings in the published literature.     

THE FLOOD HAZARD AND DYNAMICS OF THE URBAN RESIDENTIAL LAND MARKET1

ABSTRACT: Literature on the flood hazard/residential land market relationship is full of contradictory findings, many of which are counter-intuitive to the belief that flooding has a negative impact on house prices. This research advances a conceptual framework through which these relationships might be re-examined. Based on the expected utility model, the theoretical framework integrates the economic notion of capitalization with spatial and temporal characteristics of the flood hazard. Four communities with different flood regimes are used to test the effect of flooding on the residential real estate market. Results show that, (1) there is an identifiable relationship between characteristics of the flood hazard and changes in house values; (2) the length of the recovery period is dependent on characteristics and expectations of flooding, attributes of the real estate market, and availability of capital to fuel recovery; and (3) dynamics of the urban market and spatial extent of the flood hazard influence these relationships. Further research is now necessary to examine these findings under different spatial, temporal, hydrological, and socio-economic conditions.     

Community-Based Monitoring in support of local sustainability

Community-based monitoring (CBM) activities in Canada are increasing. A conceptual framework developed for and used to guide a pilot CBM project in 31 Canadian communities is evaluated. The framework provided the strategic direction necessary for successful implementation of the pilot and proved useful in the training of community coordinators hired for the project. Limitations of the framework include its inadequate attention to community diversity, its linearity, and insufficient expression of the adaptive and synergistic nature of its components. In order to support local sustainability, CBM appears to require an approach that is context-specific, iterative, and adaptive. Given these emergent characteristics, an enhanced conceptual framework for CBM in Canada is developed based on four dynamic themes: community mapping, participation assessment, capacity building, and information delivery.     

Discretionary Judgement in Local Planning Authority Decision Making: Screening Development Proposals for Environmental Impact Assessment

Screening is a critical decision-stage in the Environmental Impact Assessment (EIA) process and involves the determination of whether or not a development proposal will require EIA. This decision requires a discretionary judgement on whether the development has the potential to cause ‘significant environmental effects’, and consequently there is potential for diversity to exist in formal requests for EIA. Drawing upon a comprehensive survey of Local Planning Authorities (LPAs) in England and Wales, this paper explores the characteristics of LPA screening decision making since the introduction of revised EIA regulations in March 1999. The paper starts with a theoretical overview of rationality, decision making and planning theory, followed by a brief review of the regulatory context of EIA screening. The research approach is then outlined and the survey findings are presented, including a detailed consideration of organizational and individual level analyses set within the context of planning theory judgement debates. Comparisons with other European countries are briefly made, before drawing conclusions and recommendations.     

Fluoride in drinking water: A survey of expert opinions

In recent years, public debate over the standard setting process related to fluoride in drinking water and the fiuoridation of water supplies has been steeped in much controversy. Discussion of such issues has been con strained by the limited consideration of options relevant to particular problems. To examine the responses to specific issues, we presented an analysis of the problem of excessive fluoride in drinking water to a group of 120 experts. Ninety-seven of the 120 responded to a detailed mail questionnaire distributed as part of a larger exploratory survey. Definite patterns in preferences were noted with certain aspects of the problem, although in some cases significant differences were found due to such factors as the institutional affiliation, residential status, and the length of professional experience of the participants. In general, our experts preferred immediate corrective action over extensive further research into the reduction of scientific uncertainties; were willing to take personal action to obtain fluoride-free water rather than wait for official action; preferred the supplier to fluoridate the supplies, if needed; and favoured a strong local control of such issues with consumers of public water systems and private well owners shouldering much of the financial responsibility. Preliminary results from such exploratory surveys can lead to insightful research hypotheses for further testing. Verification of such hypotheses by consumers, from areas with excessive fluoride in drinking water, is a valuable area for future research.     

Dissolved organic matter mediated aquatic transport of chlorinated dioxins

The bioavailability and environmental fate of extremely hydrophobic environmental contaminants such as chlorinated dioxins is linked to their solubility characteristics in water. Solubilities of three chlorinated dioxins, viz., 1,2,3,7-T₄CDD, 1,2,3,4,7-P₅CDD, and 1,2,3,4,7,8-H₆CDD, were determined in pure water using a glass bead generator column technique, and their enhanced solubilities in the presence of several dissolved humic fractions quantified at 20, 30 and 40°C. The strengths of these interactions between chlorodioxins and the dissolved humic substances, viz., a fulvic acid, a humic acid, and Aldrich humic acid, were examined using simple thermodynamic calculations. A new partition/association coefficient, K_oc (mobile) is defined.     

Effect of housing geometry on the performance of Chemcatcher passive sampler for the monitoring of hydrophobic organic pollutants in water

Passive sampling of pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler (the Chemcatcher) was developed and calibrated for the measurement of time weighted average concentrations of hydrophobic pollutants in water. Effects of physicochemical properties and environmental variables (water temperature and turbulence) on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water have been published. In this study, the effect of modification in sampler housing geometry on these calibration parameters was studied. The results obtained for polycyclic aromatic hydrocarbons show that reducing the depth of the cavity in the sampler body geometry increased the exchange kinetics by approximately twofold, whilst having no effect on the correlation between the uptake and offload kinetics of analytes. The use of performance reference compounds thus avoids the need for extensive re-calibration when the sampler body geometry is modified.     

A framework to assess regional environmental impacts of dedicated energy crop production

Numerous studies have evaluated air quality and greenhouse gas mitigation benefits of biomass energy systems, but the potential environmental impacts associated with large-scale changes in land-use patterns needed to produce energy crops have not been quantified. This paper presents a framework to assess the potential soil, water, and biodiversity impacts that may result from the large-scale production of dedicated energy crops. The framework incorporates producer economic decision models with environmental models to assess changes in land use patterns and to quantify the consequent environmental impacts. Economic and policy issues that will affect decisions to produce energy crops are discussed. The framework is used to evaluate erosion and chemical runoff in two Tennessee regions. The analysis shows that production of dedicated energy crops in place of conventional crops will significantly reduce erosion and chemical runoff.     

Influence of flue-gas desulfurization systems on coal combustion by-product quality at kentucky power stations burning high-sulfur coal

Two Kentucky power plants burning similar blends of high-sulfur western Kentucky and southern Indiana coal provide a unique opportunity to examine the variations in coal combustion by-products due to differences in the method of wet flue-gas desulfurization (FGD). One plant employed carbide lime-based scrubbing for two units and a dual-alkali process for the third unit. The second plant employed a Mississippian limestone from Kentucky for all four units. This study provides an example of optical and SEM petrographic techniques, supplemented by chemical analyses, applied to the study of, at least from the geologic perspective, non-traditional materials. The coal sources comprise a blend of high volatile C and B bituminous, high vitrinite (85–90%, mmf), high-sulfur (> 3%, dry) coals. The fly ash is dominated by glassy phases (70–80%) with about 5–10% spinel (predominately magnetite), 3–10% quartz, and 4–10% isotropic coke comprising the remaining portion of the ash. SEM observations indicate that the glassy particles exhibit a bimodal size distribution with sub-micron glass spheres and a population of larger (several 10s of microns) spheres. The bottom ash has higher proportions of spinels and mullite, with negligible carbon forms, compared to the fly ash from the same units. Fly ashes were observed to be lower in Fe and higher in Al, Si, and S compared to the bottom ashes. Carbide lime, a by-product of acetylene manufacture, soda ash, and limestone were the reagents used in the flue-gas desulfurization processes. The primary FGD by-product is a calcium sulfite slurry which is vacuum filtered and mixed with fly ash and, usually, lime, to form a stable product for disposal. The FGD by-products have some potential, as yet unrealized, for utilization.