Sedimentation and sulfate reduction under a mussel culture

The sedimentation and dissimilatory sulfate reduction under a blue-mussel culture were quantified in order to gain information on the environmental impact of intense mussel farming. The sedimentation rate (3 g C·m^-2·d^-1) under a culture is nearly three times higher than at a nearby reference station. A build-up of sediment rich in organic material and sulfide takes place under the mussels. At 15°C the sulfate reduction rate was 30.5 mmol SO ₌ ⁴ ·m^-2·^-1 in the upper 10 cm of the mussel sediment. The increase in sedimentation under a mussel culture and the consequent effects should be considered when establishing mussel farms.     

Pharmaceutical management through environmental product labeling in Sweden

There is an increased awareness that medicinal products for human use may cause negative effects in the environment. In Sweden a voluntary environmental classification system for drugs has been established in collaboration between producers, authorities and the public health care, and used for five years. The idea is to enhance the market demand for medicines with less environmental impact, which in turn will stimulate the producers to design future medicines to be more environmentally friendly. The system is open to the public and based on assessment of the active ingredient in the medicinal product into several classes of risk and hazard, respectively. It is closely related to the EMEA guidelines. Risk is expressed as the ratio between the predicted environmental concentration (PEC) of the active ingredient (AI) and its predicted no effect concentration (PNEC). The hazard is expressed in terms of the AI's persistence, potential to bioaccumulation, and eco-toxicity. Drug data for the classification are delivered by the respective producers.Hitherto more than 300 AI, representing more than 50% of the Swedish volume of drug use, have been classified. Data for risk assessment were missing in 47% of AI. Among drugs with data 7% had a PEC/PNEC ratio > 1, and another 7% had a ratio between 0.1 and 1. The AIs with highest ratio (> 10) were two estrogens. Data for hazard assessment were lacking in 16% of the AI. Among drugs with environmental data 92% were not ready biodegradable, 23% had potential to bioaccumulation, and 61% were toxic to aquatic organisms at a concentration below 1 mg/l. These data are utilized by regional pharmaceutical expert groups when selecting substances to be recommended in public health care in Sweden. They may also be used by prescribing doctors who want to identify the environmentally most favourable substance among several with equivalent medical effect.We conclude that environmental data on human medicinal products are often missing, or reveal unfavourable environmental properties. A proper judgement of the environmental impact of an AI requires a joint evaluation of its risk and hazard. We suggest that the pharmaceutical producers should highlight environmental precaution when designing new AIs, and that the environmental data should be transparent to the general public.     

On wear resistance of tool steel

Maintaining a reasonably low cutting tool wear when producing forming tools is a general challenge in the development of new forming tool materials. The tool life of a hot forming tool steel (H13) has been significantly improved by reducing its Si-content from 1.0 to 0.06 wt.%. However, this modified H13 (MH13) also displays a reduced cutting tool life due to higher cutting forces and a stronger tendency to form built up layers (BUE) on the cutting edge. This paper explains why.Gleeble tests of MH13 revealed a significantly higher flow stress in the 820–900 °C temperature interval in MH13 compared to H13. Thermo-Calc simulations showed that when reducing the Si-content from 1.0 to 0.06 wt.% the initial temperature for ferrite-to-austenite transformation (A1) was reduced from 900 °C to 820 °C. Knowing that austenite has totally different mechanical and thermal properties than ferrite, the difference in A1 between the two steels explains the higher cutting forces and higher tendency for BUE-formation. The conclusion is that the difference in machinability between H13 and MH13 is primarily related to their difference in A1.An attempt was also made to find a new tool material composition that can combine the wear resistance of MH13 and the good machinability of H13. Thermo-Calc simulations were performed with slightly modified alloying content without changing its properties as a good forming tool material, with the aim to increase A1. For instance, reducing the Mn content from 0.5 to 0.05 wt.% proved to increase A1 from 820 to 850 °C.     

Impaired benthic macrofauna function 4 years after sediment capping with activated carbon in the Grenland fjords,Norway

Environmental Science and Pollution Research - The sediments in the Grenland fjords in southern Norway are heavily contaminated by large emissions of dioxins and mercury from historic industrial...     

Sustainable development of food production: a case study on scenarios for pig production

To study future, sustainable production systems, a step-wise method was used to create three future scenarios for pig production based on different sustainability goals. The first scenario focused on animal welfare and the natural behavior of the animals. The second targeted low impacts on the environment and the efficient use of natural resources. The third scenario aimed at product quality and safety. Each scenario fulfilled different aspects of sustainability, but there were goal conflicts because no scenario fulfilled all sustainability goals. The scenarios were then parameterized. The environmental impact was calculated using the life-cycle assessment (LCA) methodology, and the economic cost was calculated from the same data set. The cost per kilo of pork was highest for the animal welfare scenario and similar for the other two scenarios. The environmental scenario had the lowest environmental impact, and the product-quality scenario the highest. The results are discussed based on different future priorities.     

Effects of simulated acid rain on growth rate in a spruce-living spider

Growing juveniles of the spruce-living spider Pityohyphantes phrygianus were sprayed with water of different acidity--pH approximately 7 (control), 4.0 (acid rain) and 2.2-in a 2.5-month laboratory experiment. The growth rates did not differ between control and pH 4.0, while there was a significant growth reduction at pH 2.2. A low mortality occurred only in the pH 2.2 group. P. phrygianus seems to be resistant against acid rain although negative long-term effects cannot be ruled out.     

Response of marine benthic fauna to thin-layer capping with activated carbon in a large-scale field experiment in the Grenland fjords,Norway

Environmental Science and Pollution Research - A field experiment with thin-layer capping was conducted in the Grenland fjords, Norway, for remediation in situ of mercury and dioxin-contaminated...     

Interrelationships between sulfate reducing and methane producing bacteria in coastal sediments with intense sulfide production

Coastal sediments receiving different amounts of organic carbon through sedimentation were investigated with respect to sulfate reduction and methanogenic activity. Sampling was carried out at sediment temperatures of 7° and 15°C. Sulfate-reducing and methanogenic bacteria were found at all depths. Sulfate reduction decreased with depth and the highest sulfide concentrations were found a few centimeters below the sediment surface, up to 15 mM at 15°C and pH 7.1. In the same segments a maximum in the methane concentration was also found, 0.91 mM. The high sulfide concentration inhibited the methane formation from acetate but not from carbon dioxide. In the organic rich sediment sulfate reduction was limited by the diffusion of SO ₄ ⁺ into the sediment and methane production from acetate by sulfide diffusion out of the sediment. When electron acceptor concentration limits sulfate reduction, thermodynamic calculations show that the utilization of electron donors more reduced than acetate is favored. In the sediment with the high carbon-input, acetate predominated at 15°C whereas in the low carbon-input sediment hardly any short chain organic acids were detected. The possibility of a shift in sulfate reduction from acetate oxidation to acetate production is discussed.