A short-cut method for assessing absorbents for post-combustion carbon dioxide capture

A short-cut method for the estimation of the minimum regeneration energy and optimum solvent flow rate in post-combustion carbon dioxide capture by absorption is presented. It is developed for comparing solvents of which only little thermo-physical data is known. The closed absorber–desorber cycle is described by an equilibrium stage model (modified Kremser equation with discretized equilibrium curves). The method can be implemented in any mathematical toolbox or as stand-alone solution. The only required input is the solubility data at absorber and desorber conditions, the heat of absorption and heat capacities. The caloric data may be estimated. The method was applied to monoethanolamine (MEA) and two solvents from the EU-project CASTOR. Comparisons with experimental results from pilot-plant studies with MEA show that the method, despite its simplicity, gives reasonable results. The method should also be useful in other applications where absorbents, of which only little data is available, need to be screened.     

Heavy metal contamination of drinking water in Kamrup district, Assam, India

This study was undertaken to assess the heavy metal concentration of the drinking water with respect to zinc, copper, cadmium, manganese, lead and arsenic in Kamrup district of Assam, India. Ground water samples were collected from tube wells, deep tube wells and ring wells covering all the major hydrogeological environs. Heavy metals in groundwater are estimated by using Atomic Absorption Spectrometer, Perkin Elmer Analyst 200. Data were assessed statistically to find the distribution pattern and other related information for each metal. The study revealed that a good number of the drinking water sources were contaminated with cadmium, manganese and lead. Arsenic concentrations although did not exceeded WHO limits but was found to be slightly elevated. Copper and zinc concentrations were found to be within the prescribed WHO limits. An attempt has also been made to ascertain the possible source of origin of the metals. Positive and significant correlation existing between manganese with zinc and copper indicates towards their similar source of origin and mobility. In view of the present study and the level of heavy metal contamination, it could be suggested to test the potability of the water sources before using it for drinking purpose.     

Indoor air quality modeling for PM10, PM2.5, and PM1.0 in naturally ventilated classrooms of an urban Indian school building

Assessment of indoor air quality (IAQ) in classrooms of school buildings is of prime concern due to its potential effects on student??s health and performance as they spend a substantial amount of their time (6?C7 h per day) in schools. A number of airborne contaminants may be present in urban school environment. However, respirable suspended particulate matter (RSPM) is of great significance as they may significantly affect occupants?? health. The objectives of the present study are twofold, one, to measure the concentrations of PM₁₀ (<10  $\upmu $ m), PM_2.5 (<2.5  $\upmu $ m), and PM_1.0 (<1.0  $\upmu $ m) in naturally ventilated classrooms of a school building located near a heavy-traffic roadway (9,755 and 4,296 vehicles/hour during weekdays and weekends, respectively); and second, to develop single compartment mass balance-based IAQ models for PM₁₀ (NVIAQM_pm10), PM_2.5 (NVIAQM_pm2.5), and PM_1.0 (NVIAQM_pm1.0) for predicting their indoor concentrations. Outdoor RSPM levels and classroom characteristics, such as size, occupancy level, temperature, relative humidity, and CO₂ concentrations have also been monitored during school hours. Predicted indoor PM₁₀ concentrations show poor correlations with observed indoor PM₁₀ concentrations (R ² = 0.028 for weekdays, and 0.47 for weekends). However, a fair degree of agreement (d) has been found between observed and predicted concentrations, i.e., 0.42 for weekdays and 0.59 for weekends. Furthermore, NVIAQM_pm2.5 and NVIAQM_pm1.0 results show good correlations with observed concentrations of PM_2.5 (R ² = 0.87 for weekdays and 0.9 for weekends) and PM_1.0 (R ² = 0.86 for weekdays and 0.87 for weekends). NVIAQM_pm10 shows the tendency to underpredict indoor PM₁₀ concentrations during weekdays as it does not take into account the occupant??s activities and its effects on the indoor concentrations during the class hours. Intense occupant??s activities cause resuspension or delayed deposition of PM₁₀. The model results further suggests conductance of experimental and physical simulation studies on dispersion of particulates indoors to investigate their resuspension and settling behavior due to occupant??s activities/movements. The models have been validated at three different classroom locations of the school site. Sensitivity analysis of the models has been performed by varying the values of mixing factor (k) and newly introduced parameter R _c. The results indicate that the change in values of k (0.33 to 1.00) does not significantly affect the model performance. However, change in value of R _c (0.001 to 0.500) significantly affects the model performance.     

A review on efficient electromagnetic interference shielding materials by recycling waste—a trio of land to lab to land concept

Environmental Science and Pollution Research - The materials used in electrical and electronic applications have great importance and broader applications, but they have severe electromagnetic...     

Survival of Porcine Reproductive and Respiratory Syndrome Virus in Pork Products

There is a risk of virus transmission through contaminated pork, and many viruses are considered potential hazards for both humans and livestock. The risk of transmission may be elevated with importation/exportation of meat between countries globally. Survival of porcine reproductive and respiratory syndrome virus (PRRSV) in different pork products has not been studied. The present study evaluated PRRSV survival in four different products: fresh sausage, ham, bacon, and acidified sausage prepared with experimentally contaminated pork. These products were prepared according to standard methods used by the manufacturers of pork products, and then stored at room temperature, 4 °C and ?20 °C. PRRSV was detected only in fresh sausage for up to 15 days at 4 °C and for 30 days at ?20 °C. No PRRSV was detected at any temperature in any of the other three products. These preliminary data provide valuable information for the pork processing industry, as well as in planning for import/export of these products among different countries.     

The effects of scrubber installation at the Navajo Generating Station on particulate sulfur and visibility levels in the Grand Canyon

Grand Canyon National Park (GCNP) is a mandatory Class I federal area that is afforded visibility protection under the Federal Clean Air Act. In this paper, we have examined the effects on visibility and particulate sulfur (Sp) at GCNP as a result of reducing sulfur dioxide (SO2) emissions by 90% from the Navajo Generating Station (NGS). Scrubbers were retrofitted to each of the three units at NGS during 1997, 1998, and 1999. The Inter-agency Monitoring of Protected Visual Environments aerosol network database affords us an opportunity to examine trends in Sp and extinction both prescrubber and postscrubber. The NGS impacts GCNP primarily during the winter (December to February). During winter, at times, there are fogs, stratus, and high-relative humidity in the Grand Canyon. When the NGS plume interacts with these fogs and stratus, rapid conversion of SO2 to Sp can occur. A variety of analytical techniques were used, including cumulative frequency plots of Sp and extinction, and chemical mass balance and tracer source apportionment analysis. We also deployed P value statistical analysis of "extreme" Sp values. Before scrubbers were installed, values of Sp approaching 2 microg/m3 were occasionally observed. Because scrubbers have been installed, high levels of Sp have been markedly reduced. Statistical P value analysis suggests that these reductions were significant. Furthermore, we have also observed that Sp has been reduced throughout the cumulative frequency curve during winter by approximately 33% since scrubbers were installed. By contrast, during summer when the NGS impact on the Canyon is minimal, there has been only a relatively small decrease in Sp.     

Clearance of atrazine in soil describing xenobiotic behavior

The primary aim of this study was to evaluate the “clearance concept” as a tool for describing the behavior of xenobiotic movement into and through soils. As an example, degradation of 2-chloro-4-ethylamino-6-isopropylamino-s-triazine (atrazine) with the formation of metabolites 2-chloro-6-isopropylamino-s-triazine (desethylatrazine) and 2-chloro-4-ethylamino-s-triazine (desisopropylatrazine) was investigated. Atrazine was sprayed post-emergently in doses of 0.125 or 0.5 g active ingredient/m² each on four test plots. Soil type was a sandy-loam, on which corn (Zea mays L.) was cultivated. Soil samples were taken as cores of 0.2 m depth 0, 1, 2, 4, 8, 12, 16 and 20 weeks after application of atrazine, and analyzed by HPLC. Soil concentrations of atrazine were highly correlated (r=0.993, p< 0.001) between the two applications of 0.125 g/m² and 0.5 g/m². Up to 50% of the atrazine was measured as metabolites during the whole vegetation period. Clearance of atrazine from soil was calculated as the total load of atrazine divided by the area under the soil atrazine concentration time curve. Soil atrazine clearance was calculated as 5.13 +/? SD 1.10 and 5.17 +/? SD 1.02 liter of soil per day for doses of 0.125 g/m² and 0.5 g/m², respectively (from a “soil unit” of 1 × 1 × 0.2 meter). The clearance concept might be a tool for risk assessment of xenobiotics.     

Recent advances based on the synergetic effect of adsorption for removal of dyes from waste water using photocatalytic process

The problem of textile dye pollution has been addressed by various methods,mainly physical,chemical,biological,and acoustical.These methods mainly separate and/or remove the dye present in water.Recently,advanced oxidation processes(AOP)have been focused for removal of dye from waste water due to their advantages such as ecofriendly,economic and capable to degrade many dyes or organic pollutant present in water.Photocatalysis is one of the advance oxidation processes,mainly carried out under irradiation of light and suitable photocatalytic materials.The photocatalytic activity of the photocatalytic materials mainly depends on the band gap,surface area,and generation of electron–hole pair for degradation dyes present in water.It has been observed that the surface area plays a major role in photocatalytic degradation of dyes,by providing higher surface area,which leads to the higher adsorption of dye molecule on the surface of photocatalyst and enhances the photocatalytic activity.This present review discusses the synergic effect of adsorption of dyes on the photocatalytic efficiency of various nanostructured high surface area photocatalysts.In addition,it also provides the properties of the water polluting dyes,their mechanism and various photocatalytic materials;and their morphology used for the dye degradation under irradiation of light along with the future prospects of highly adsorptive photocatalytic material and their application in photocatalytic removal of dye from waste water.     

Effect of Temperature on Absorption Efficiency of NO2 in Arsenite Method

The sodium arsenite method developed by Jacobs andHochheiser is one of the most widely used manualmethods for nitrogen dioxide (NO₂) monitoring inambient air, particularly in developing countries. Asreported, the method gives 82% NO₂ absorptionefficiency (NAE) in the concentration range from 40 to750 g/m³, when only one impinger tube isemployed in the sampling train at a flow rate of 0.2lpm and for 24 h sampling duration. Accordingly,a uniform correction factor (0.82) is used indenominator to calculate the ultimate concentration ofNO₂ in ambient air.In the present investigation, the effect oftemperature on absorption efficiency of NO₂ isstudied employing four impinger tubes in series tocollect the maximum NO₂ generated in the gasstream. The study conducted at 16, 26 and 36 °Ctemperatures shows maximum absorption efficiency(average) of 87.8% at 26°C in 1st impingertube. At lower and higher temperatures, it is foundconsiderably less. A suitable correction factor,therefore, must be applied to estimate actual NO₂concentration in ambient air using arsenite method, intropical countries like India, where atmospherictemperature variations are large (less than 5°Cin winter and more than 45°C in summer).     

Reducing emissions from deforestation and forest degradation (REDD) projects: lessons for future policy design and implementation

In response to the pressing global challenges of climate change, initiatives under the auspices of ‘reducing emissions from deforestation and forest degradation’ (REDD) have been implemented in over 30 developing and least-developed countries since 2005. The initiatives cover nearly every significant and vulnerable forest ecosystem worldwide. In this study we review six representative initiatives, two each from Africa, Asia and Latin America. Strength, weakness, opportunity and threat analysis is done to evaluate each initiative's policy framework, design, implementation and results thus far. The main policy and project implementation factors that appear to lead to effective and successful REDD project outcomes include having clearly formulated project design; governance, land tenure rights and capacity; equity and transparency; indigenous peoples' rights and knowledge; local–international coordination; and enhancing local and institutional capacities. Based on these findings, we provide recommendations for future REDD policy action and project implementation to make it work for the poor and achieve its intended goals.