Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

辽宁省机动车污染防治对策探讨

辽宁省机动车保有量大、增长速度快，机动车污染物排放总量不断增加，给城市环境空气质量改善带来巨大压力，本文根据辽宁省机动车污染实际情况，提出了辽宁省机动车污染的防治对策。     

An evaluation of quality assurance to monitor acidprecipitation by using ion balancein Guizhou, China

ＡｎｅｖａｌｕａｔｉｏｎｏｆｑｕａｌｉｔｙａｓｓｕｒａｎｃｅｔｏｍｏｎｉｔｏｒａｃｉｄｐｒｅｃｉｐｉｔａｔｉｏｎｂｙｕｓｉｎｇｉｏｎｂａｌａｎｃｅｉｎＧｕｉｚｈｏｕ，ＣｈｉｎａＫａｎｇＤｅｍｅｎｇ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖｉｒ...     

制备块体纳米材料的新工艺——等径角挤压

综述了等径角挤压法制备块体纳米材料的发展及其工艺原理 ,并在此基础上论述了等径角挤压材料的微观结构及其应用 ,指出了等径角挤压法目前存在的问题。     

大窑湾疏浚水环境要素变化特征及其相关关系

根据大窑湾后６个泊位疏浚工程本底调查和疏浚监测结果，借助因子分析探讨了疏浚前后水环境要素的变化特征及相关关系，找出了控制污染物分布的主要因子，评价了疏浚对海洋环境的影响。     

在实践中不断提高安全预评价的质量

笔者结合建设项目劳动安全预评价的工作实践 ,分析了安全预评价中存在的主要问题 ,介绍了首都经贸大学劳动安全卫生评价中心在安全预评价工作中的有益探索和成功经验 ,提出了进一步提高安全预评价质量的建议 ,努力寻求一条使安全预评价质量持续改进、不断提高的有效途径。     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

STREAM DISCHARGE PREDICTION VIA A GRID BASED SOIL WATER ROUTING WITH PADDY FIELDS1

ABSTRACT: A grid based daily hydrologic model for a watershed with paddy fields was developed to predict the stream discharge. ASCII formatted elevation, soil, and land use data supported by the GRASS Geographic Information System are used to generate distributed results such as surface runoff and subsurface flow, soil water content, and evapotranspiration. The model uses a single flow path algorithm and simulates a water balance at each grid element. A linear reservoir assumption was used to predict subsurface runoff components. The model was applied to a 75.6 km² watershed located in the middle of South Korea, and observed stream flow hydrographs from 1995 and 1996 were compared to model predictions. The stream flow predictions of 1995 and 1996 generally agreed with the observed flow, resulting in a Nash‐Sutcliffe efficiency R² of 0.60 and 0.62, respectively. The hydraulic conductivity for percolating water through the saturated layer affected baseflow generation. The levee height of the paddy influenced the time and magnitude of the surface runoff, depending on irrigation management. The model will be used for making low flow management decisions by evaluating the role of each land use to stream flow, especially in case of paddy decrease by gradual urbanization of a watershed.     

支持灾害管理决策的咨询信息系统

为减少中国大城市灾害造成的损失，运用信息科学、系统科学的方法和计算机技术，建立支持灾害管理决策的咨询信息系统（ＤＭＤＳＣＩＳ）。灾害文献数据库管理系统（ＤＬＤＢＭＳ）是这一咨询信息系统的知识基础和信息来源。本文论述了“ＤＬＤＢＭＳ”和三个主要的子系统“灾害文献数据库管理系统”、“灾害事实数据库管理系统”、“中外减灾法规超文本检索系统”的作用、设计思想、构成、功能和实现方法。     

Design of a representative and cost-effective sampling programs for industrial wastewater with examples from bleached kraft pulp and paper mills

The diagram constructed for selection of sampling methods indicates that, for a systematic error, E ≤ 13%, grab sampling (GS) may be used to characterize effluents with variation coefficient of flow ≤ 120% and of contaminant concentrations ≤ 10%. For the whole studied range of variation coefficient of contaminant concentrations (2–82%), time-proportional compositing (TC) method may be applied with E ≤ 10% for effluents characterized by variation coefficients in flow < 90%. The more complicated flow-proportional compositing (FC) method is required only for effluents with larger variation coefficients or to produce more precise results. The diagram constructed for selection of sampling frequencies indicates that sequential sampling at intervals of approximately 60 min may be applied with E ≤ 10% for effluents characterized by variation coefficients ≤ 30%. Practical application of the diagrams, constructed using normal series, was checked against monitoring data from two pulp and paper mills in Vietnam. The two diagrams provided results on sampling methods and frequencies in good agreement with those obtained from actual monitoring data with percentages of agreement cases of 80 and 75%, respectively. The approach was applied in design of a monitoring program at the Bai Bang integrated pulp and paper mill in Vietnam.