高效离子色谱法同时检测F^—、CH3COO^—、HCOO^—、Cl^—离子的方法研究

使用高效离子色谱法（HPIC），一次进样50μL，可在8分钟内完成F^-、CH3COO^-、HCOO^-、Cl^-检测；且能用同套系统梯度淋洗完成其他常规阴离子的检测。本文并从最佳洗涤条件的选择、主要影响因素、方法准确度、精密度，方法检出限等方面进行了研究与探讨。     

A novel pretreatment approach for fast determination of organochlorine pesticides in biotic samples

Recent studies have focused on enantiomeric behaviors of chiral organochlorine pesticides (OCPs) in biotic matrix because they provide insights into the biotransformation processes of chiral OCPs. In the present paper, a double in-line column chromatographic method was developed to effectively remove the lipid impurity in different biotic samples for clean-up of OCPs. After an initial Soxhlet extraction of OCPs from the biotic samples by a mixture of acetone and dichloromethane (DCM), dimethyl sulfoxide (DMSO) was directly added to the extract, and low boiling point solvents (acetone and DCM) were then evaporated. OCPs remained in DMSO were eluted via column 1 filled with silicon gel, and subsequently passed through column 2 packed with 15% deactivated florisil. This novel method was characterized by significant time and solvent savings. The recovery rates of α -HCH (hexachlorocyclohexane), β -HCH, γ -HCH and δ -HCH were 78.5 ± 3.1%, 72.4 ± 7.7%, 72 ± 4.0% and 70.0 ± 8.7%, respectively, and 92.5 ± 3.8%, 79.7 ± 6.7% and 83.4 ± 6.5% for 1,1-dichloro-2-(2-chlorophenyl)-2-(4- chlorophenyl) ethylene (o,p′-DDE), 1,1-dichloro-2-(2-chlorophenyl)-2-(4-chloro phenyl)ethane (o,p′-DDD) and 1,1,1-trichloro-2-(2-chlorophenyl)-2-(4-chlorophenyl) ethane (o,p′-DDT), separately. In addition, the separation efficiencies of the target compounds by both achiral and chiral gas chromatographic columns were satisfactory using the established method. Therefore, the double in-line column chromatography was a useful alternative method for pretreatment of OCPs in different biotic samples.     

Projecting Spatial Patterns of Flood Hazard: Recent Climate and Future Changes over Yangtze River Basin

Projection of hazard changes in climate extremes is critical to assessing the potential impacts of climate change on human and natural systems. Using simulations of providing regional climates for impacts studies, five indicators (rainstorm days, maximum 3-day precipitation, elevation, gradient and distance from river or lake) were selected to project the spatial patterns of flood hazard over Yangtze River Basin for the baseline period (1961– 1990) and future (2011–2100) under SRES B2 scenario. The results ...     

The adsorption behaviour of dimethyltin from seawater onto sedimentary phase in Tianjin Harbor

The adsorption of dimethyltin from a seawater matrix onto suspended particulate matter was studied. The influences of pH and salinity, adsorption isotherms at various temperatures, and the adsorption rate under certain experimental conditions were determined. It was found that the adsorption capacity was highest at c. pH 6 and decreased with increasing salinity. The adsorption behaviour at various temperatures was described best by a Langmuir isotherm. The adsorption capacity of dimethyltin was higher in natural seawater than in artificial seawater at the same temperature.     

Au − Pd/mesoporous Fe2O3: Highly active photocatalysts for the visible-light-driven degradation of acetone

Three-dimensionally ordered mesoporous Fe_2O_3(meso-Fe_2O_3) and its supported Au, Pd,and Au-Pd alloy(xA uP dy/meso-Fe_2O_3; x = 0.08–0.72 wt.%; Pd/Au molar ratio(y) = 1.48–1.85)photocatalysts have been prepared via the KIT-6-templating and polyvinyl alcohol-protected reduction routes, respectively. Physical properties of the samples were characterized, and their photocatalytic activities were evaluated for the photocatalytic oxidation of acetone in the presence of a small amount of H_2O_2 under visible-light illumination. It was found that the meso-Fe_2O_3 was rhombohedral in crystal structure. The as-obtained samples displayed a high surface area of 111.0–140.8 m~2/g and a bandgap energy of 1.98–2.12 eV. The Au, Pd and/or Au–Pd alloy nanoparticles(NPs) with a size of 3–4 nm were uniformly dispersed on the surface of the meso-Fe_2O_3 support. The 0.72 wt.% AuP d1.48/meso-Fe_2O_3 sample performed the best in the presence of 0.06 mol/L H_2O_2 aqueous solution, showing a 100% acetone conversion within4 hr of visible-light illumination. It was concluded that the good performance of 0.72 wt.%AuPd_(1.48)/meso-Fe_2O_3 for photocatalytic acetone oxidation was associated with its ordered mesoporous structure, high adsorbed oxygen species concentration, plasmonic resonance effect between AuPd_(1.48) NPs and meso-Fe_2O_3, and effective separation of the photogenerated charge carriers. In addition, the introduction of H_2O_2 and the involvement of the photo-Fenton process also played important roles in enhancing the photocatalytic activity of 0.72 wt.%AuPd_(1.48)/meso-Fe_2O_3.     

Nb2O5 nanowires in-situ grown on carbon fiber: A high-efficiency material for the photocatalytic reduction of Cr(VI)

Niobium oxide nanowire-deposited carbon fiber (CF) samples were prepared using a hydrothermal method with amorphous Nb₂O₅·nH₂O as precursor. The physical properties of the samples were characterized by means of numerous techniques, including X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), UV–visible spectroscopy (UV–vis), N₂ adsorption–desorption, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy. The efficiency for the removal of Cr(VI) was determined. Parameters such as pH value and initial Cr(VI) concentration could influence the Cr(VI) removal efficiency or adsorption capacity of the Nb₂O₅/carbon fiber sample obtained after hydrothermal treatment at 160°C for 14 hr. The maximal Cr(VI) adsorption capacity of the Nb₂O₅ nanowire/CF sample was 115 mg/g. This Nb₂O₅/CF sample also showed excellent photocatalytic activity and stability for the reduction of Cr(VI) under UV-light irradiation: the Cr(VI) removal efficiency reached 99.9% after UV-light irradiation for 1 hr and there was no significant decrease in photocatalytic performance after the use of the sample for 10 repeated cycles. Such excellent Cr(VI) adsorption capacity and photocatalytic performance was related to its high surface area, abundant surface hydroxyl groups, and good UV-light absorption ability.     

Nb_2O_5 nanowires in-situ grown on carbon fiber: A high-efficiency material for the photocatalytic reduction of Cr(Ⅵ)

Niobium oxide nanowire-deposited carbon fiber(CF) samples were prepared using a hydrothermal method with amorphous Nb_2O_5·nH_2O as precursor. The physical properties of the samples were characterized by means of numerous techniques, including X-ray diffraction(XRD), energy-dispersive spectroscopy(EDS), scanning electron microscopy(SEM), transmission electron microscopy(TEM), selected-area electron diffraction(SAED), UV–visible spectroscopy(UV–vis), N_2 adsorption–desorption, Fourier transform infrared spectroscopy(FT-IR), and X-ray photoelectron spectroscopy. The efficiency for the removal of Cr(VI) was determined.Parameters such as pH value and initial Cr(VI) concentration could influence the Cr(VI) removal efficiency or adsorption capacity of the Nb_2O_5/carbon fiber sample obtained after hydrothermal treatment at 160°C for 14 hr. The maximal Cr(VI) adsorption capacity of the Nb_2O_5 nanowire/CF sample was 115 mg/g. This Nb_2O_5/CF sample also showed excellent photocatalytic activity and stability for the reduction of Cr(VI) under UV-light irradiation: the Cr(VI) removal efficiency reached 99.9% after UV-light irradiation for 1 hr and there was no significant decrease in photocatalytic performance after the use of the sample for 10 repeated cycles. Such excellent Cr(VI) adsorption capacity and photocatalytic performance was related to its high surface area,abundant surface hydroxyl groups, and good UV-light absorption ability.     

地下污油罐腐蚀因素分析及防腐措施

地下污油罐是石油炼化行业中的常用储罐,分析了地下土壤或油罐内部介质等因素对其造成的腐蚀,结合实际案例提出了污油罐防腐措施     

Mesoporous cobalt monoxide-supported platinum nanoparticles: Superior catalysts for the oxidative removal of benzene

Mesoporous Co_3 O_4(meso-Co_3 O_4)-supported Pt(0.53 wt.% Pt/meso-Co304) was synthesized via the KIT-6-templating and polyvinyl alcohol(PVA)-assisted reduction routes.Mesoporous CoO(meso-CoO) was fabricated through in situ reduction of meso-Co304 with glycerol,and the 0.18-0.69 wt.% Pt/meso-CoO samples were generated by the PVA-assisted reduction method.Meso-Co_3 O_4 and meso-CoO were of cubic crystal structure and the Pt nanoparticles(NPs) with a uniform size of ca.2 nm were well distributed on the mesoCo_3 O_4 or meso-CoO surface.The 0.56 wt% Pt/meso-CoO(0.56 Pt/meso-CoO) sample performed the best in benzene combustion(T_(50%)=156℃and T_(90%)=186℃at a space velocity of 80,000 mL/(g h)).Introducing water vapor or C02 with a certain concentration led to partial deactivation of 0.56 Pt/meso-CoO and such a deactivation was reversible.We think that the superior catalytic activity of 0.56 Pt/meso-CoO was intimately related to its good oxygen activation and benzene adsorption ability.     

Studies on relationships between air pollutants and allergenicity of Humulus Scandens pollen collected from different areas of Shanghai

Pollen pollution and allergy are becoming prominent issues in China. However, few studies on pollinosis have been reported. As an allergen in the atmosphere, allergenic Humulus scandens pollen was collected from four districts of Shanghai, including Wusong (WS), Jiading (JD), Xujiahui (XJH) and Songjiang (SJ). The mass concentrations of SO₂, NO₂, O₃, PM_10, and PM_2.5 (particulate matter with air dynamic diameter less than 10 and 2.5 µm, respectively) near the four sampling sites were also recorded during Humulus scandens pollen season. The allergenicity of the Humulus scandens pollen was assessed by using of a rat model and enzyme linked immunosorbent assay (ELISA). Relationships between the allergenicity and air pollutants were correlated. Our results demonstrated that the biological viability of the pollens collected from the four districts exhibited no significant differences. ELISA and dot blotting results further demonstrated that the serum of sensitized rats exhibited much higher immune-reactive response than that of control groups. Western blotting showed that the 15 KD (1KD = 1000 dalton) proteins of Humulus pollen led to the allergic response. The allergenic intensity of Humulus pollen protein from different samples followed the pattern: WS > JD > XJ > SJ. There was a negative relationship between the allergenicity of Humulus pollens and PM₁₀ (R = -0.99) / PM_2.5 (R = -0.73), and a positive relationship with O₃ (R = 0.92). These data clearly showed that PM₁₀ and PM_2.5 could enhance Humulus pollen protein release, and O₃ could aggravate the allergenicity of the Humulus pollen.