Preparation and Characterization of Clay Nanocomposites of Plasticized Starch and Polypropylene Polymer Blends

Plasticized starch (PLS) is a renewable, degradable, and inexpensive polymer, but it suffers from poor mechanical properties. The mechanical properties can be improved by blending PLS with polyolefins, nonetheless, at high PLS content, the mechanical properties remain poor. Here we show that addition of clay can greatly improve the mechanical properties of PLS/polypropylene blends at high starch content. Unmodified and organically modified montmorillonite clays, MMT and Cloisite 30B respectively, were added to blends of glycerol-plasticized starch and polypropylene, compatibilized using maleated polypropylene. TEM indicates that MMT is well dispersed in the PLS phase of the blends, while Cloisite 30B is located both within the PLS phase as well as at the interface between PLS and PP. At high PLS content, the addition of clay increased the tensile strength and tensile modulus by an order of magnitude, while reducing the ultimate elongation only slightly. Such improvements are attributable to both the addition of clay as a reinforcing component, as well as to the change in the two phase morphology due to addition of clay.     

Larvicidal and pupicidal activities of eco-friendly phenolic lipid products from Anacardium occidentale nutshell against arbovirus vectors

Environmental Science and Pollution Research - Aedes aegypti and Culex quinquefasciatus are vectors of diseases that constitute public health problems. The discovery of products capable of...     

Ultrasound effects on the activity of Aspergillus niger lipases in their application in dairy wastewater treatment

We evaluated the effect of ultrasound radiation on lipase activity. The experiments were conducted using a low‐cost crude enzyme extract. We then used this lipase to treat dairy effluent. The results of our study presented an increase of approximately 430% in the concentration of free fatty acids.     

Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Dynamics of leaf litter and soil respiration in a complex multistrata agroforestry system,Pernambuco, Brazil

High litter inputs in agroforestry systems contribute to soil microbial activity, soil fertility and productivity. Considering that the cycling of organic matter is essential to the maintenance of physical–chemical and microbiological properties of the soil, the aims of this work were to estimate the production, accumulation and decomposition of litter, and assess soil microbial respiration in a complex multistrata agroforestry system located in the north-east of Brazil. This agroforestry system has three strata formed by forest and fruit trees and species of multiple uses. During 3 years (2011–2013), leaf litter was sampled monthly to account for litterfall and quarterly to account for litter accumulation. The rates of litter decomposition were estimated using the ratio produced-to-accumulated litter, and the correlation between litter fall and rainfall was calculated. Precipitation data were provided by the water and climate agency of Pernambuco (APAC). Soil samples (0–15 cm) were also taken quarterly, simultaneously with the litter accumulation samples, and soil microbial respiration was assessed using the capture, by a KOH solution, of the evolved CO₂. The annual production of leaf litter was stable in the 3 years of study in this agroforestry system, and the monthly input of litter to the soil was influenced by rainfall, being higher in the dry seasons. The accumulated litter on the ground was constant, as was microbial activity (respiration) through time. The estimated litter decomposition rates were 1.49 (first year), 1.33 (second year) and 1.42 (third year), being considered rapid rates of decomposition. This guarantees (to the farmer) that this system is capable of maintaining soil fertility and eliminates the need for chemical fertilizers.     

Removal of heavy metal ions from wastewaters using dendrimer-functionalized multi-walled carbon nanotubes

Dendrimer-functionalized multi-walled carbon nanotubes (MWCNT) for heavy metal ion removal from wastewaters were developed. Triazole dendrimers (TD) were built directly onto the carbon nanotube surface by successive click chemistry reactions affording the zero- and first-generation dendrimer-functionalized MWCNT (MWCNT-TD1 and MWCNT-TD2). The Moedritzer-Irani reaction carried out on the amino groups present on the MWCNT-TD2 sample gave the corresponding α-aminophosphonate nanosystem MWCNT-TD2P. Both MWCNT-TD2 and MWCNT-TD2P nanosystems have been characterized by physical, chemical, and morphological analyses. Their chelating abilities towards the toxic metal ions Pb²⁺, Hg²⁺, and Ni²⁺ and the harmless Ca²⁺ ion have been experimentally evaluated in the two different sets of experiments and at the salt concentrations of 1 mg/mL or 1 μg/mL by inductively coupled plasma mass spectrometry (ICP-MS). The results of these studies pointed out the interesting chelating behavior for the phosphonated nanosystem towards the Hg²⁺ ion. The complexation mode of the best chelating system MWCNT-TD2P with mercury was investigated through density functional theory (DFT) calculations, suggesting a chelation mechanism involving the two oxygen atoms of the phosphate group. The synthesized dendrimers, supported on the multi-walled carbon nanotubes, have shown the potential to be used for the selective toxic metal ion removal and recovery.     

Biosurfactants during in situ bioremediation: factors that influence the production and challenges in evalution

Research on the influence of biosurfactants on the efficiency of in situ bioremediation of contaminated soil is continuously growing. Despite the constant progress in understanding the mechanisms involved in the effects of biosurfactants, there are still many factors that are not sufficiently elucidated. There is a lack of research on autochthonous or exogenous microbial metabolism when biostimulation or bioaugmentation is carried out to produce biosurfactants at contaminated sites. In addition, studies on the application of techniques that measure the biosurfactants produced in situ are needed. This is important because, although the positive influence of biosurfactants is often reported, there are also studies where no effect or negative effects have been observed. This review aimed to examine some studies on factors that can improve the production of biosurfactants in soils during in situ bioremediation. Moreover, this work reviews the methodologies that can be used for measuring the production of these biocomposts. We reviewed studies on the potential of biosurfactants to improve the bioremediation of hydrocarbons, as well as the limitations of methods for the production of these biomolecules by microorganisms in soil.     

Elemental mobility in sulfidic mine tailings reclaimed with paper mill by-products as sealing materials

Environmental Science and Pollution Research - Sealing layers made of two alkaline paper mill by-products, fly ash and green liquor dregs, were placed on top of 50-year-old sulfide-containing...     

Organochlorine compounds in bovine milk from the state of Mato Grosso do Sul – Brazil

Organochlorines are highly hydrophobic, synthetic organic pollutants that accumulate in the environment and in food webs. The primary route of human exposure to organochlorines is through food-mainly fat-rich food of animal origin such as meat, fish, and dairy products. Here we determined the presence and concentration of organochlorine residues in pasteurized milk from Mato Grosso do Sul, Brazil, to monitor consumer exposure to these contaminants. Organochlorine pesticides in milk samples were analyzed using solid phase extraction in octadecyl silica-prepacked columns and identified by gas chromatography using an electron capture detector. Of the 100 composite samples analyzed, more than 90% contained residues of organochlorine pesticides: aldrin was present in 44% of the samples, followed by ∑DDT (36%), mirex (34%), endosulfan (32%), chlordane (17%), dicofol (14%), heptachlor (11%) and dieldrin (11%). Compared to the values established by law, the concentration of the compounds in some samples was above the reference values. Given the importance that milk and its products have in the human diet, it is essential to know whether the levels of pesticide residues are kept well below the recommended levels to minimize the risk to human health.     

Efficacy of new mass-trapping devices against Bactrocera oleae (Diptera tephritidae) for minimizing pesticide input in agroecosystems

Decreasing pesticide use in olive groves is central to controlling pathogens and pests such as Bactrocera oleae. This has led to the development of mass trapping devices which not only minimize pesticide use but, with improved efficacy of attractants, also decrease costs associated with pest control and ensures that the quality of olive oil is safe for human consumption. This study was undertaken to test a new device which utilizes reduced quantities of both insecticide (lambda-cyalothrin) as well as the female olive fly pheromone (1,7-dioxaspiro-(5.5)-undecane). The new device was tested against an older device manufactured by the same company. The use of plastic polymers as substrate for encapsulating the pheromone allowed for a slower pheromone release, prolonging the efficacy and duration and thus reducing costs. The density of adult populations was monitored using yellow chromotropic traps that were checked every ten days and the degree of olive infestation, as determined by preimago stages, was assessed by analyzing 100 drupes per plot. Infestation analyses were performed every ten days. The control plot had the lowest density of adults and the highest drupe infestation rate. The new devices were more effective than the older devices in both attracting adults and controlling infestation of drupes. Moreover, the new devices containing reduced amounts of pheromone and insecticide were cheaper and exhibited longer functional efficacy. In addition to the slower release of attractants, the plastic polymers used in these newer devices were also more resistant to mechanical and weather degradations. Results demonstrate that mass trapping can indeed be an effective means of controlling B. oleae via eco-sustainable olive farming.