Persistence of Viruses by qPCR Downstream of Three Effluent-Dominated Rivers in the Western United States

This study was designed to determine the quantitative polymerase chain reaction (qPCR) signal persistence of viruses in three effluent-dominated streams. Samples were collected from the effluent outfall of three wastewater treatment plants in the Western United States and downstream at different locations. All samples were tested for the presence of pepper mild mottle virus (PMMoV), adenoviruses, norovirus GI and GII, Aichi virus, and enteroviruses using qPCR. PMMoV was detected most frequently in 54/57 (94.7%) samples, followed by adenoviruses which was detected in 21/57 (36.8%) samples. PMMoV was detected at all locations downstream and up to 32 km from the discharge point. This study demonstrated that the detection signal of PMMoV was able to persist in wastewater discharges to a greater degree than human enteric viruses in effluent-dominated rivers.     

Presumed decomposition pathway of pentachlorophenol through atomic charge calculation and photodecomposition experiments

Batch photodegradation of pentachlorophenol (PCP) was conducted with ultraviolet irradiation. The main intermediates were identified as 2,3,5,6-tetrachlorophenol, 2,3,4,6-tetrachlorophenol and 2,5-dichlorophenol. Based on the density functional theory, atomic charge values were applied to reveal the photodegradation pathway. A comparison of the results of the experiment confirms that PCP molecules are dechlorinated in the descending order of their atomic charge values. From these results, it appears that determining the atomic charge values of organohalogen compounds is a promising method for predicting the dechlorination position in photodegradation.     

Patchiness and bistability in the comprehensive cyanobacterial model (CCM)

We analyzed spatiotemporal dynamics of cyanobacteria using a four-component mathematical model with nutrients, unicellular algae, colonial algae and herbivorous zooplankton. One of the astonishing abilities of cyanobacteria is the morphological change from the unicellular type to the colonial or filamentous type in response to grazing activities of zooplankton, the phenomenon known as phenotypic plasticity. Our model, referred to as comprehensive cyanobacterial model (CCM), includes the effects of phenotypic plasticity. Depending on parameter values, CCM exhibits not only bistability but also limit cycle oscillations without showing the paradox of enrichment, which has been a controversy among mathematical ecologists. Further, CCM is modified to reaction–advection–diffusion equations, the simulation results of which indicate that the ratio of the lateral diffusivity to the turbulent velocity significantly affects the appearance of patchiness patterns.     

Photodegradation of hexachlorobenzene and theoretical prediction of its degradation pathways using quantum chemical calculation

Experimentally determined photodegradation pathways of hexachlorobenzene (HCB), a chlorinated aromatic compound, in hexane, 2-propanol (IPA), and methanol were compared with those predicted by quantum chemical calculation based on density functional theory (DFT), and the adequacy of the prediction method was evaluated. The experimental main degradation pathways of HCB were virtually the same for the three solvents and also agreed with the predicted main degradation pathways. In the DFT method, the main degradation product was the dechlorinated benzene at the position where the C-Cl bond was predicted to have the lowest bond dissociation energy. This result suggested that the photodechlorination pathways of chlorinated aromatic compounds could be predicted by comparing the bond dissociation energies calculated with the DFT method.     

Evaluation of pressurized liquid extraction for the analysis of four pesticides in unpolished rice

The aim of to evaluate efficiency of this study was extraction pressurized liquid extraction (PLE) for the analysis of four pesticides, fthalide, etofenprox, fenitrothion, and isoprothiolane, in unpolished rice by comparing with homogenization as a reference technique. The concentrations of four selected pesticides obtained by PLE with acetonitrile at 130°C for 10 min × 2 cycles were comparable to those by homogenization with water-soaking. The repeatability of the analysis, represented as relative standard deviations (RSDs), were 1.4–3.6% (n = 3) for PLE at 130°C and 1.2–3.8% (n = 3) for homogenization with water-soaking. Recovery yields of surrogates were 75–88% and 87–109% for PLE at 130°C and homogenization with water-soaking, respectively, and these were satisfactory according to the method of positive list. This study suggested that PLE can be applied for the analysis of selected four pesticides in unpolished rice as well as homogenization with water-soaking.     

Removal of PCDD/Fs from contaminated sediment and released effluent gas by charcoal in a proposed cost-effective thermal treatment process

A novel cost-effective thermal treatment technology has been proposed for the removal of PCDD/Fs from contaminated sediment and released effluent gas using charcoal as both an adsorbent and a thermal source. When a reactor was used for thermal treatment, the PCDD/Fs removal efficiency exceeded 98% from the sediment at the three different air superficial velocities employed in this study. The total PCDD/F international toxic equivalent (I-TEQ) contents, both in the treated sediments and effluent gas, were below the Japanese emission standard limit. Analysis of the PCDD/F contents in different fractions showed that large quantities of PCDDs but not PCDFs were evaporated from the sediment and adsorbed in the moist sediment column. This difference was attributed to the formation of PCDDs from pentachlorophenol (PCP) during the cooling process following the thermal treatment process in the reactor. This proposed thermal process provides a promising alternative to the conventional methods.     

Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate

It is necessary to remove chlorine efficiently from municipal waste plastics (MWP) that contain polyvinyl chloride (PVC) and other plastics containing chlorine. In this article we consider thermal degradation liquefaction technology. In Japan, the chlorine content of reclamation oil products must be kept below 100 ppm owing to the quality standard for pyrolysis oil. Liquefaction dechlorination technology for MWP is still an important issue to study. The twin-screw extruder that has been developed as dechlorination technology for blast furnaces and coke ovens has a shorter residence time for dechlorination than other dechlorination technologies. In this article, we used a single-screw extruder for the dechlorination process because it also has a short residence time. Experiments on the dechlorination process were carried out by using a single-screw extruder to assess its dechlorination performance. Practical use of the single-screw was demonstrated by the operation of a commercial oil reclamation plant operated by Sapporo Plastic Recycle Co., Ltd. (SPR). Moreover, an investigation of cascade recycling was carried out in 2008 in which material recycle wastes were mixed with MWP and processed by chemical recycling (liquefaction). It was demonstrated that cascade recycling is an efficient recycling combination and contributes to local feedstock recycling. However, it was shown that MR wastes affect the quality of the reclamation oil when they make up more than 40% of the feed mix. If the quantity of MR wastes is kept below 40%, the reclamation oil is able to meet the quality standard. The SPR plant can be operated safely and in a stable manner.     

Efficacy of forming biofilms by naphthalene degrading Pseudomonas stutzeri T102 toward bioremediation technology and its molecular mechanisms

In natural environments, bacteria often exist in close association with surfaces and interfaces. There they form "biofilms", multicellular aggregates held together by an extracellular matrix. The biofilms confer on the constituent cells high resistance to environmental stresses and diverse microenvironments that help generate cellular heterogeneity. Here we report on the ability of Pseudomonas stutzeri T102 biofilm-associated cells, as compared with that of planktonic cells, to degrade naphthalene and survive in petroleum-contaminated soils. In liquid culture system, T102 biofilm-associated cells did not degrade naphthalene during initial hours of incubation but then degraded it faster than planktonic cells, which degraded naphthalene at a nearly constant rate. This delayed but high degradation activity of the biofilms could be attributed to super-activated cells that were detached from the biofilms. When the fitness of T102 biofilm-associated cells was tested in natural petroleum-contaminated soils, they were capable of surviving for 10 wk; by then T102 planktonic cells were mostly extinct. Naphthalene degradation activity in the soils that had been inoculated with T102 biofilms was indeed higher than that observed in soils inoculated with T102 planktonic cells. These results suggest that inoculation of contaminated soils with P. stutzeri T102 biofilms should enable bioaugmentation to be a more durable and effective bioremediation technology than inoculation with planktonic cells.     

Effects of parabens on apoptosis induced by serum-free medium

Alkyl esters of p-hydroxybenzoic acids (parabens), an endocrine disrupter, are used as preservatives in cosmetics and foods. In this study, to understand the relationship between parabens and differentiation in infants, the effects of parabens on apoptosis induced by serum deprivation in PC12 cells were investigated. In addition, apoptosis-related factors were assayed. As results, a tendency toward enhancement of apoptosis was observed in the cells cultured in the serum-free medium with methylparaben, and this tendency was suggested to be related to the contents of BAD, a pro-apoptotic protein. Butylparaben did not show any tendency to enhance apoptosis.     

Evaluation method of automobile recycling systems for Asia considering international material cycles: application to Japan and Thailand

To examine an appropriate recycling system for end-of-life vehicles (ELVs) from Japan in the context of Asia, an Asian international automobile recycling input-output (AI-ARIO) analysis is presented. The AI-ARIO analysis spatially expands the existing ARIO analysis within the framework of the waste input-output (WIO) analysis developed by Nakamura et al., which considers the interdependence between the flow of goods and wastes in a country. This analysis focuses on the local and global cycles for ELVs in Asia and can evaluate the environmental and economic effects of alternative recycling systems. We estimated the AI-ARIO table for Japan and Thailand and applied it to scenario analyses covering the restriction of ELV trade between the two countries, the introduction of new recycling techniques in Thailand, and centralized treatment in Japan. We verified the applicability and effectiveness of the AI-ARIO analysis through the scenario analyses.