Sustainable groundwater remediation and reuse case study

Sustainability is an important consideration when designing a remedy given the value that can be demonstrated to all stakeholders. A case study is presented that illustrates an example where sustainability was emphasized during the selection and implementation of a groundwater remedy. An extensive free and/or residual product investigation was completed to demonstrate that hydraulic control is a suitable remedy and active direct treatment was not required pursuant to the state regulations. A pump and treat system for onsite hydraulic containment was installed to control plume migration. The system allows for 100 percent reuse of treated groundwater in the manufacturing process. Both the groundwater reuse and investigation conclusions have resulted in significant cost savings and sustainability benefits, including the reduction in the annual load on the drinking water aquifer by up to 138 million gallons per year.     

Americium,plutonium and uranium contamination and speciation in well waters,streams and atomic lakes in the Sarzhal region of the Semipalatinsk Nuclear Test Site,Kazakhstan

New data are reported on the concentrations, isotopic composition and speciation of americium, plutonium and uranium in surface and ground waters in the Sarzhal region of the Semipalatinsk Test Site, and an adjacent area including the settlement of Sarzhal. The data relate to filtered water and suspended particulate from (a) streams originating in the Degelen Mountains, (b) the Tel′kem 1 and Tel′kem 2 atomic craters, and (c) wells on farms located within the study area and at Sarzhal. The measurements show that ²⁴¹Am, ^239,240Pu and ²³⁸U concentrations in well waters within the study area are in the range 0.04–87 mBq dm⁻³, 0.7–99 mBq dm⁻³, and 74–213 mBq dm⁻³, respectively, and for ²⁴¹Am and ^239,240Pu are elevated above the levels expected solely on the basis of global fallout. Concentrations in streams sourced in the Degelen Mountains are similar, while concentrations in the two water-filled atomic craters are somewhat higher. Suspended particulate concentrations in well waters vary considerably, though median values are very low, at 0.01 mBq dm⁻³, 0.08 mBq dm⁻³ and 0.32 mBq dm⁻³ for ²⁴¹Am, ^239,240Pu and ²³⁸U, respectively. The ²³⁵U/²³⁸U isotopic ratio in almost all well and stream waters is slightly elevated above the ‘best estimate’ value for natural uranium worldwide, suggesting that some of the uranium in these waters is of test-site provenance. Redox analysis shows that on average most of the plutonium present in the microfiltered fraction of these waters is in a chemically reduced form (mean 69%; 95% confidence interval 53–85%). In the case of the atomic craters, the proportion is even higher. As expected, all of the americium present appears to be in a reduced form. Calculations suggest that annual committed effective doses to individual adults arising from the daily ingestion of these well waters are in the range 11–42 μSv (mean 21 μSv). Presently, the ground water feeding these wells would not appear to be contaminated with radioactivity from past underground testing in the Degelen Mountains or from the Tel′kem explosions.     

Relationship of Destruction Parameters to the Destruction/Removal Efficiency of PCBs

The destruction/removal efficiency (DRE), and the ability to accurately measure it, is a function of the concentration of the chemical compound in the input waste, the incinerator design and operation, sampling methods, and the analytical procedures. All of these are interrelated. This paper discusses the basic DRE equation [DRE = W_In W_out)/W_in × 100] and how it relates to some of the other destruction parameters. Some example data from the literature are presented. While PCBs have been used as the example, the equations and graphs are equally valid for some other hazardous compounds (POHCs), with the substitution of the 99.99% DRE requirement in lieu of the 99.9999% DRE for PCBs. The use of the relationships discussed in this paper should allow incinerator operators to more efficiently plan demonstration test burns which will adequately demonstrate the DRE.     

Elemental composition of sediments in Lake Jinzai, Japan: Assessment of sources and pollution

Bottom sediments from Lake Jinzai in southwest Japan were analyzed to determine their chemical compositions and to assess the potential for ecological harm by comparison with sediment quality guidelines. The pollution status of lake sediments was evaluated by employing contamination factor (CF), pollution load index (PLI), and geoaccumulation index (I(geo)), focusing on a suite of elements in lakebed and core sediments. Elevated concentrations of As, Pb, Zn, Cu, TOC, N, and P were present in several layers of the upper core and other surface sediments. The elevated metal concentrations are likely related to the fine-grained nature of the sediments, reducing bottom conditions produced by abundant organic matter, and possibly minor non-point anthropogenic sources. Moreover, correlations between the concentrations of trace metals and organic carbon, nitrogen, phosphorus, and iron, suggest that these elements play a role in controlling abundances. Calculated CF, PLI, and I(geo) indicate that the sediments are strongly polluted with respect to As, moderately to strongly polluted with Zn, and moderately polluted with Pb and Cu. Metal concentrations exceed the New York State Department of Environmental Conservation (NYSDEC) lowest effect level and the Canadian Council of Ministers of the Environment (CCME) interim sediment quality guidelines that indicate moderate impact on aquatic organisms in the study area.     

ATFITUDES TOWARDS ARTIFICIAL WETLANDS IN ONTARIO FOR STORMWATER CONTROL AND WATERFOWL HABITAT1

ABSTRACT: The objective was to survey individuals from different interest groups in Ontario to ascertain attitudes towards the use of artificial wetlands for stormwater management and to provide waterfowl habitat. In total, 166 questionnaires were distributed and 124 cempleted returns were received. The results of the survey show that the provision of wetlands as waterfowl habitats in the context of stormwater impoundments is severely limited and is not considered an important management option. The overwhelming rejection of this integrated approach seems to be due to a lack of understanding and its comparative newness. Some of the perceived problems and concerns could be addressed by improvements in the design of the artificial wetlands. The design and implementation of an artificial wetland prototype as part of an education program in Ontario is recommended. A few research opportunities also are outlined.     

PULSED TRICKLING EFFECTS ON SOIL MOISTURE DISTRIBUTION1

ABSTRACT Laboratory experiments were conducted to study effects of trickle emitter discharge rate on the distribution of soil moisture in a silty-clay loam soil. Both pulsed and continuous irrigation treatments were studied. A simulation model was used to evaluate the results obtained in the laboratory. The agreement between the predicted and measured soil moisture distribution patterns was quite good. For both pulsed and continuous applications, increasing trickle discharge rate resulted in a decrease in the horizontal component and an increase in the vertical component of the wetted soil profile. Compared to the continuous treatments, pulsed applications resulted in significant reduction in water loss below the root zone. Pulsed applications rates can replace continuous small discharge rates to reduce irrigation water runoff problems on heavy soils and with restricted infiltration allow the use of larger emitter orifices to decrease potential clogging of the trickle system.     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

Resource scarcity,energy use and environmental impact: A case study of the New Bedford,Massachusetts, USA,fisheries

The commercial fishing fleet in New Bedford, Massachusetts, USA, harvests seafood on George’s Bank, home of one of the nation’s most productive fisheries. We calculated the energy return on investment (EROI) and carbon intensity of protein harvest in the New Bedford fisheries from 1968 to 1988. EROI is the ratio of the energy content of the edible fish protein harvested to the quantity of fossil fuel energy used directly in the harvesting process. Carbon intensity is the quantity of carbon dioxide (CO₂) released (from the burning of fossil fuels) per calorie of edible fish protein harvested. The results show that the EROI of protein harvest declined from 0.18 to 0.028 from 1968 to 1988, indicating that the energy used to harvest seafood increased from about 6 to 36 kcal of fuel for each kilocalorie of protein harvested. The quantity of CO₂ released per calorie of edible fish protein is a linear function of energy use and therefore increased in a similar manner. During this period there was a large increase in fishing effort (caused by the increase in the real price of seafood products, favorable tax treatment for new vessel construction, and low interest loans from the government), and a decline in several important species of fish. The results suggest that fishing pressure could be managed effectively by the regulation of fuel use by the fleet. Despite the increase in the price of many seafood products, fishermen absorbed many of the costs of increasing scarcity in the form of longer working hours and fewer men per vessel.