Air and landfill gas movement through passive gas vents installed in closed landfills

In a closed landfill, Japan, remedial actions have been undertaken to address the inadequate leachate collection and drainage systems. Part of this process included installing many passive gas vents in the landfill to promote stabilization of landfilled waste. This study focused on the gas velocity in vents by conducting tracer tests to elucidate the gas flow via passive gas vents. The gas composition and gas temperature in the vents was also measured.As the gas vents pass through the waste layer, both landfill gas and air flows through the vents. Therefore, passive gas vents can be used to aerate landfilled waste as well as to collect and release landfill gas. Aerobic biodegradation occurs when air migrates through the waste layer if organic matter is present; this increases the temperature of the waste layer. Inflow of air into the gas vents can occur at a wide range of depths, even 10–20 m below ground level. Air is induced not from the surface of the landfill, but horizontally along the waste layer. The driving force of air induction from outside is a buoyancy effect caused by the temperature rise due to aerobic biodegradation.     

Study on chlorine removal from mixture of waste plastics

The recycling of waste plastics that include plastics that contain chlorine, such as polyvinyl chloride, is difficult because the chlorine leads to the corrosion of equipment. Then, the dechlorination method of waste plastics containing chlorine (CCWP) that consists of a series of melt process and hot water process was examined. CCWP was put into the melt process with coal tar (HOB) and converter dust (CD) to inhibit the diffusion of the chlorine-containing gas. The results indicated that iron oxide of the principal element of CD combines with chlorine eliminated from CCWP, and forms water-soluble iron chloride on the melt process. HOB dissolves or adsorbs a part of the chlorine during the melt process, and inhibits the diffusion of the chlorine-containing gas. Approximately 98% of the chlorine in the CCWP reacts with CD and forms iron chloride, which can be extracted on the hot water process.     

Concentrations of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and polychlorinated biphenyls in blood and breast milk collected from pregnant women in Sapporo City, Japan

We measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (PCBs), and non-dioxin-like PCBs in paired samples of blood and breast milk collected from 67 secundiparas in Sapporo City, Japan, and combined this data with those of the 30 secundiparas previously measured. The arithmetic mean total toxic equivalents (TEQ-WHO) concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk of the 97 secundiparous subjects were 3.0-23 (mean: 13, median: 14) and 2.7-20 (mean: 8.6, median: 8.5) pg TEQ g⁻¹ lipid, respectively. The sums of the concentrations of 56 non-dioxin-like PCB congeners that were measured in the subjects’ blood and breast milk were 16-326 (mean: 107, median: 100) and 12-252 (mean: 73, median: 67) ng g⁻¹ lipid, respectively. The partitioning ratios of individual congeners of PCDDs, PCDFs, dioxin-like PCBs, and non-dioxin-like PCBs from blood to breast milk in secundiparas were almost the same as those of primiparas that have been recently reported, suggesting that the partitioning ratios of these compounds from maternal blood to breast milk in women is little affected by delivery. Furthermore, the partition of PCB congeners with chlorine at the 2-, 3-, 4′-, and 5-positions or the 2-, 4-, 4′-, and 5-positions of the biphenyl ring from the blood to the breast milk tended to occur at a higher level than that of other congeners. In particular, the levels of tetraCB-74 and hexaCB-146 in the breast milk for both primiparous and secundiparous mothers were slightly higher than those in the blood.     

Oxygen Permeability and Biodegradability of Polyuronic Acids Prepared from Polysaccharides by TEMPO-Mediated Oxidation

Polyuronic acids, i.e., amylouronic acid, cellouronic acid and chitouronic acid, were prepared from starch, cellulose and chitin, respectively, by the 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO)-mediated oxidation, and their gas-barrier properties and biodegradability were studied in consideration to use the polyuronic acids as flexible packaging films or coating materials. Cellouronic acid and amylouronic acid had excellent oxygen-barrier properties similar to that of poly(vinyl alcohol) (PVA), while chitouronic acid did not. The regular chemical structures of the former two polyuronic acids with no bulky substituents or adducts may have brought about such high oxygen-barrier levels. An oxidized product prepared form fine microcrystalline cellulose by the TEMPO-mediated oxidation was not completely dissolved in water, but became a paste. However, this paste also formed sufficiently smooth films by coating, and had good gas-barrier property. All polyuronic acids prepared were biodegradable; cellouronic acid and chitouronic acid had high degrees of biodegradability, while amylouronic acid had quite low value. These various characteristics are significant for end use of these new polyuronic acids as gas-barrier materials for biodegradable packaging.     

Numerical analysis of gas explosion inside two rooms connected by ducts

Simulations of gas explosion of hydrogen/air mixture inside two rooms connected by ducts are carried out. Scalar transport chemical reaction model and LES turbulence model are utilized to reduce the calculation load and to conduct real-scale analysis. The effects of ignition source locations and volume of ignited room are analyzed, and the time history of pressure and rate of pressure rise in each room are focused in this study. When the volume of the ignited room is larger than the other room, the high pressure from the other room causes a force to act on the partition to the ignited room. This study indicates that the current technique can predict specific features of gas explosions inside two rooms connected by the ducts.     

Comparison of Surface Organic Compound Mass Spectrum Patterns by LD-TOFMS for Megalopolis Atmospheric Particles and Diesel Exhaust Particles (DEP)

PM_2.5 and PM₁₀ samples for megalopolis atmospheric particles were collected at Shinjuku, Tokyo in December 1998–January 1999 and August 1999, for two weeks both in winter and summer, with a 24 hr sampling interval. Sampling of PM_2.5 and PM₁₀ in diesel exhaust particles (DEP) was carried out using an automobile exhaust testing system, with a diesel truck placed on a chassis dynamometer. Sampling conditions included idling, constant speed of 40 km hr^-1, M-15 test pattern and 60%-revolution/40%-load of maximum power. Mass spectrums of organic compounds adhering to the surface of the PM_2.5 and PM₁₀ samples were analyzed by laser desorption time-of-flight mass spectrometry (LD-TOFMS, analytical mass range: m/z 1–m/z 380 000). LD-TOFMS analysis of those samples revealed consistently the detection of low-mass organic compounds up to m/z 800. For the megalopolis atmospheric particles, the mass spectrum pattern of wintertime samples was almost the same as that of the summertime samples for both PM_2.5 and PM₁₀. The major peak was m/z 177, and the minor peaks were m/z 84, 94, 101, 163, 189 and 235. The mass spectrum pattern of DEP was the same for all samples under all test conditions. The major peak was m/z 101, and other detected peaks were small.