Research to develop a predicting system of mammalian subacute toxicity (3) construction of a predictive toxicokinetics model

A new predictive toxicokinetics model was developed to estimate subacute toxicity (target organs, severity, etc.) of non-congeneric industrial chemicals, where the chemical structures and physico-chemical properties are only available. Thus, a physiological pharmacokinetics model, which consists of blood, liver, kidney (these were experimentally found as major toxicological targets), muscle and fat compartments , was established to simulate the chemical concentrations in organs/tissues with pharmacokinetic parameters by means of Runge-Kutta-Gill algorithm. The pliarmacokinetic parameters, i.e. absorption rate, absorption ratio, hepatic extraction ratio of metabolism and renal clearance were calculated by using separately established Quantitative Structure-Pharmacokinetics Relationship equations. The developed predictive model was then applied to simulations of 43 non-congeneric industrial chemicals. The chemical concentrations in organs/tissues after single oral administration were simulated, and their maximum concentrations (Cmax's) and area tinder the concentration-time curves (AUC's) were calculated.Fast Inverse Laplace Transform was newly applied for the purpose of simulation of 28-day repeated dose toxicity.Simulated concentrations of 28 days repeated dose were, however, found to be the same as those of simple repetitions of a single administration per day because of the short half-lives of non-congeneric industrial chemicals.A comparison of subacute toxicity data with Cmax's and AUC's in a single dose scenario suggested that the organs/tissues with relatively high concentrations of tested chemical substances were the most sensitive targets within a chemical.Chemical concentrations in liver, for instance, were correlated with the severity of hepatotoxicity among the chemicals. It was also suggested that to improve and widen the present approach, data of metabolite and reactivity of non-congeneric industrial chemicals to organs/tissues, receptors, etc. should be incorporated into the model.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Multi-component behavior of fixed-bed adsorption of dioxins by activated carbon fiber

The multi-component behavior of fixed-bed adsorption of dioxins (DXNs) was examined through detailed analyses of the concentration profiles of isomers in fixed-bed activated carbon fiber (ACF). Regularities in both adsorption rates and strengths were clarified. (1) The rate of transfer in the adsorption of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCCDs/DFs) tends to increase with decreasing number of chlorine substituents. Axial dispersion also tends to increase with a decreasing number of chlorine substituents under our experimental conditions. (2) Homologues with the same number of chlorine substituents in PCDDs/DFs have similar adsorption strengths. The adsorption strength of PCDD/DF isomers is probably greater than that of co-planar polychlorinated biphenyls (co-PCB) isomers when the number of chlorine substituents is identical. (3) The adsorption strength of isomers depends on their molecular structure. In PCDDs/DFs the toxic isomers, all of which have vicinal chlorine substituents at the 2, 3, 7 and 8 positions, are relatively strong. It is clear, especially in TeCDDs, that isomers with vicinal chlorine substituents are stronger than isomers without. In co-PCBs, isomers without chlorine substituents at ortho positions are stronger than those with, and (4) A close analogy exists between the adsorption strength order for ACF and the elution order in gas chromatography (GC).     

Arsenic compounds accumulated in pearl oyster Pinctada fucata

We investigated the water-soluble arsenic compounds present in the soft tissues of both the pearl-free and the pearl-containing pearl oysters. After dividing the soft tissue into five parts, i.e., adductor muscle, foot, mantle, viscera and gill, each part was analyzed by high-performance liquid chromatography-inductively coupled plasma mass spectrometry for the arsenic compounds accumulated in it. Arsenic concentration of each tissue part ranged from 22.1 to 45.7 microg g(-1) of dry tissue in the pearl-free pearl oyster and from 27.4 to 50.4 microg g(-1) of dry tissue in the pearl-containing pearl oyster. On the grounds of the present evidence the major water-soluble arsenic compound accumulated in each part was identified as arsenobetaine without exception in both types of pearl oysters (94.3-99.7% in the pearl-free pearl oyster and 87.2-99.7% in the pearl-containing pearl oyster). Trace or small amounts of arsenic compounds including tetramethylarsonium ion and arsenocholine were also detected in some parts. The levels of these minor arsenicals were a little higher in pearl-free pearl oyster than in the pearl-containing pearl oyster. This study confirms the hygienic safety of the soft tissues of both the pearl-free and the pearl-containing pearl oysters, as food.     

Genetic structure of green turtle (Chelonia mydas) peripheral populations nesting in the northwestern Pacific rookeries: evidence for northern refugia and postglacial colonization

Several green turtle (Chelonia mydas) nesting populations have been reported in the northwestern Pacific region, the northernmost limit of its distribution range. However, the population history in this region as a whole is not well understood. To clarify how the green turtle nesting populations have evolved in the northwestern Pacific region, the genetic composition of mitochondrial DNA control region sequences in the northwestern Pacific was compared with that of the other Pacific populations. We analyzed 302 samples from the northwestern Pacific rookeries, including 78 newly collected samples from rookeries in the Ryukyu Archipelago, Japan (from 24.27°N, 123.76°E to 28.45°N, 129.61°E). Our results revealed that the northwestern Pacific populations consisted of one highly endemic lineage (Clade IV) in the northwestern Pacific rookeries and two other lineages (Clades I and V) which were widely observed in other Pacific populations. We concluded that the highly endemic lineage indicated that a refugial population existed in this region during the Last Glacial Maximum, and the other two lineages indicated that colonization from populations at lower latitudes occurred during interglacial periods. The green turtle nesting populations in the present periphery of their distribution range had been thought to have their origin in colonization from lower latitudes, which served as refugia during glacial periods. However, the present results indicated that the northwestern Pacific peripheral populations have been maintained on the evolutionary timescale of this species and should be treated as long-term conservation resources.     

Recovery of solid fuel from municipal solid waste by hydrothermal treatment using subcritical water

Hydrothermal treatments using subcritical water (HTSW) such as that at 234 °C and 3 MPa (LT condition) and 295 °C and 8 MPa (HT condition) were investigated to recover solid fuel from municipal solid waste (MSW). Printing paper, dog food (DF), wooden chopsticks, and mixed plastic film and sheets of polyethylene, polypropylene, and polystyrene were prepared as model MSW components, in which polyvinylchloride (PVC) powder and sodium chloride were used to simulate Cl sources.While more than 75% of carbon in paper, DF, and wood was recovered as char under both LT and HT conditions, plastics did not degrade under either LT or HT conditions. The heating value (HV) of obtained char was 13,886-27,544 kJ/kg and was comparable to that of brown coal and lignite. Higher formation of fixed carbon and greater oxygen dissociation during HTSW were thought to improve the HV of char.Cl atoms added as PVC powder and sodium chloride to raw material remained in char after HTSW. However, most Cl originating from PVC was found to converse into soluble Cl compounds during HTSW under the HT condition and could be removed by washing.From these results, the merit of HTSW as a method of recovering solid fuel from MSW is considered to produce char with minimal carbon loss without a drying process prior to HTSW. In addition, Cl originating from PVC decomposes into soluble Cl compound under the HT condition. The combination of HTSW under the HT condition and char washing might improve the quality of char as alternative fuel.     

Study on anisotropy of effective diffusion coefficient and activation energy for deuterated water in compacted sodium bentonite

To quantify the effects of temperature on the diffusivity of deuterated water (HDO) in compacted sodium bentonite, through-diffusion experiments were conducted at elevated temperatures ranging from 298 to 333 K. Kunipia F (Na-montmorillonite content>98 wt.%; Kunimine Industries) was compacted to a dry density of 0.9 or 1.35 Mg/m(3). As montmorillonite particles were oriented perpendicular to the direction of compaction, the anisotropy of diffusivity was investigated both parallel and normal to the preferred orientation of the montmorillonite. The effective diffusion coefficient D(e) of HDO was larger when the diffusional direction was parallel as opposed to normal to the preferred orientation for both dry densities. The magnitude of D(e) and the anisotropy for HDO were in good accordance with previously reported results for tritiated water at room temperature. Activation energies of D(e) were isotropic and increased with increasing dry density over the range of 19-25 kJ/mol. This relationship was considered to be due to both pore structure development and the high activation energy of water near the montmorillonite surface.     

Inactivation of antineoplastics in clinical wastewater by electrolysis

Wastewater from clinical institutions contains a considerable amount of toxic substances. Among the toxic substances, antineoplastics may induce carcinogenesis, teratogenesis, and the emergence of mutant microorganisms in the environment. Although the incineration or chemical treatments of disposed antineoplastics are recommended, a high energy during incineration and a careful quality control during chemical treatment are required. In this study, we determined the conditions for the electrolytic treatment of an antineoplastic, epirubicin hydrochloride (EH), using two platinum electrodes with a constant current of 100 mA. We analyzed the cytotoxicity, mutagenicity and antibacterial activity of electrolyzed EH and compared them with those of unelectrolyzed EH. Nearly 100% cytotoxicity, mutagenicity and antibacterial activity were eliminated and HPLC did not detect an EH molecule, in the case of electrolysis for 6 h. We also examined the biological cytotoxicities of electrolyzed irinotecan hydrochloride, vincristine sulfate, mitomycin C, paclitaxel, methotrexate and cisplatin, and found that 72.1-99.999% toxicity was eliminated by electrolysis under the same conditions. The biological toxicity of a mixture of these drugs was determined to be decreased by approximately 99% by electrolysis under the same conditions.