A critical evaluation of the implications for risk based land management of the environmental chemistry of Sulphur Mustard

Sulphur Mustard, or "Mustard Gas" is in fact an oily liquid which was used as a chemical weapon primarily for its vesicant action which necessitates whole body protection. It is also now recognised as a carcinogenic agent upon chronic exposure. Soil contaminated with Sulphur Mustard continues to present both acute and chronic human health risks and risks to groundwater, surface water and the wider ecology at a number of sites globally and, in some cases, has done for many decades. This is at odds with the simple aqueous chemistry of the compound which would suggest that it should be short lived in the environment, especially in the presence of water. A number of studies have examined the possible factors for this longevity and, though the causes are generally assumed to be understood, the precise reasons have not yet been definitively determined and the evidence in support of the existing theories is at best circumstantial. At present, the prevailing view is that Sulphur Mustard is somehow protected by oligomeric or polymeric sulphonium species produced during incomplete hydrolysis reactions. The following review discusses the pertinent degradation mechanisms in the environment; hydrolysis and thermal degradation and the reasons put forward for the longevity of Sulphur Mustard in the literature. Other factors, such as the role of polymeric species in Sulphur Mustard droplets in modifying the mobility of the agent are also examined. Ultimately, without a thorough understanding of the abiotic fate of the Sulphur Mustard, uncertainties will remain in the application of risk assessment and remediation strategies to such sites, potentially compromising the validity or effectiveness of such actions.     

Life in extreme environments: survival strategy of the endolithic desert lichen Verrucaria rubrocincta

Verrucaria rubrocincta Breuss is an endolithic lichen that inhabits caliche plates exposed on the surface of the Sonoran Desert. Caliche surface temperatures are regularly in excess of 60 degrees C during the summer and approach 0 degrees C in the winter. Incident light intensities are high, with photosynthetically active radiation levels typically to 2,600 micromol/m(2) s(-1) during the summer. A cross-section of rock inhabited by V. rubrocincta shows an anatomical zonation comprising an upper micrite layer, a photobiont layer containing clusters of algal cells, and a pseudomedulla embedded in the caliche. Hyphae of the pseudomedulla become less numerous with depth below the rock surface. Stable carbon and oxygen isotopic data for the caliche and micrite fall into two sloping, well-separated arrays on a delta(13)C-delta(18)O plot. The delta(13)C(PDB) of the micrite ranges from 2.1 to 8.1 and delta(18)O(SMOW) from 25.4 to 28.9, whereas delta(13)C(PDB) of the caliche ranges from -4.7 to 0.7 and delta(18)O(SMOW) from 23.7 to 29.2. The isotopic data of the micrite can be explained by preferential fixing of (12)C into the alga, leaving local (13)C enrichment and evaporative enrichment of (18)O in the water. The (14)C dates of the micrite range from recent to 884 years b.p., indicating that "dead" carbon from the caliche is not a significant source for the lichen-precipitated micrite. The endolithic growth is an adaptation to the environmental extremes of exposed rock surfaces in the hot desert. The micrite layer is highly reflective and reduces light intensity to the algae below and acts as an efficient sunscreen that blocks harmful UV radiation. The micrite also acts as a cap to the lichen and helps trap moisture. The lichen survives by the combined effects of biodeterioration and biomineralization. Biodeterioration of the caliche concomitant with biomineralization of a protective surface coating of micrite results in the distinctive anatomy of V. rubrocincta.     

Experimental investigation of the machining induced residual stress tensor under mechanical loading

Residual stress induced by machining is complex and difficult to predict, since it involves mechanical loads, temperature gradients or phase transformation in the generation mechanism. In this work, an experiment with a statistical design for the residual stress tensor was performed to investigate the residual stress profile on a machined surface. In order to understand the generation mechanism of residual stress in machining, three variables and workpiece materials were carefully selected to focus on the mechanical loads and avoid the temperature gradients and phase transformation on the machined surface. The mechanical loads considered here included the chip formation force at the primary shear zone and the plowing force at the tool tip–workpiece contact. Depths of cut and rake angles were selected to alter the chip formation force, and the tool tip radius was designed to emphasize the plowing effect. The workpiece material was aluminum 3003. The experimental results showed that the chip formation force provides basic shapes of the residual stress profile for a machined surface. It decides the depth of the peak residual stress below the surface. However, the plowing force was the dominating effect on the surface residual stress, causing high stresses on the surface. The plowing force can shift the surface stress from tensile to compressive. Additionally, the measured stress tensor proved that in-plane shear stress exists for the machined surface.     

Stream-bed phosphorus in paired catchments with different agricultural land use intensity

Stream-bed sediments from three paired catchments, each draining a lower agricultural intensity system and a higher agricultural intensity system, were analysed for (a) total P (TP), (b) bioavailable-P (Resin-P), (c) equilibrium phosphorus concentration (EPC₀), and (d) degree of phosphorus saturation (DPS). The influence of agriculture on sediment P was explored within the context of other key variables that may control the sediment P concentrations such as particle size, Fe, Ca and organic matter content, and in terms of potential implications of sediment P to in-stream biota. TP concentrations, EPC₀, and the proportion of fine sediment were highest at the sites with the greater agricultural impact. Higher concentrations of bioavailable-P were also found in higher intensity agricultural systems. However, the highest concentrations of bioavailable-P were found at sites with point source inputs. Sites with high Fe concentrations had higher TP concentrations relative to agricultural intensity, but also had lower DPS values, illustrating that the sediment still had the capacity to take up P in a strongly bound form. The results from this study show that higher risk agricultural practices (intensive arable production and dairy and beef production) can lead either directly, or indirectly through increased inputs of fine sediment, to increased sediment TP concentrations. The importance of geochemical and physical controls on the bed sediments’ capacity to mitigate high P inputs in headwater lowland streams, especially under low flows and times of eutrophication risk in spring and summer is illustrated.     

Mandating interlocks for fully revoked offenders: the New Mexico experience

OBJECTIVE: In New Mexico, between July 1999 and December 2002, the installation of an ignition interlock was an optional judicial sanction for second and third driving-while-impaired (DWI) offenders. This is a study of the recidivism of 437 offenders who were convicted and installed interlocks for an average of 322 days during that period. METHODS: The comparison group was a stratified random sample (N = 12,554) of the 20,949 offenders who were convicted during the same period but did not install interlocks. DWI arrest and conviction data for all study participants were received from the Motor Vehicle Department's Citation Tracking System. RESULTS: Only 11 (2.5%) of the interlock offender group were rearrested for DWI while interlocks were installed, whereas 1,017 (8.1%) of the comparison group were rearrested during an equivalent 322-day period. Survival graphs and Cox proportional hazard regression analyses were used to compare the interlock and noninterlock groups during installation, after installation, and for the entire period up to December 2004. Results indicate a reduction in recidivism of 65% during installation. After removal, there was no significant difference in recidivism rates in a 3-year follow-up period. Following all offenders for 4 years, including both the period while the interlock was installed and the period after its removal, indicates that the difference in recidivism achieved during installation, though not increased, is maintained, so at the end of 4 years, interlock users still have lower total recidivism than nonusers. CONCLUSIONS: The magnitude of interlock effectiveness reported here is similar to those in other published studies with comparable samples.     

Assessing trophic position from nitrogen isotope ratios: effective calibration against spatially varying baselines

Nitrogen isotope signatures (δ¹⁵N) provide powerful measures of the trophic positions of individuals, populations and communities. Obtaining reliable consumer δ¹⁵N values depends upon controlling for spatial variation in plant δ¹⁵N values, which form the trophic ‘baseline’. However, recent studies make differing assumptions about the scale over which plant δ¹⁵N values vary, and approaches to baseline control differ markedly. We examined spatial variation in the δ¹⁵N values of plants and ants sampled from eight 150-m transects in both unlogged and logged rainforests. We then investigated whether ant δ¹⁵N values were related to variation in plant δ¹⁵N values following baseline correction of ant values at two spatial scales: (1) using ‘local’ means of plants collected from the same transect and (2) using ‘global’ means of plants collected from all transects within each forest type. Plant δ¹⁵N baselines varied by the equivalent of one trophic level within each forest type. Correcting ant δ¹⁵N values using global plant means resulted in consumer values that were strongly positively related to the transect baseline, whereas local corrections yielded reliable estimates of consumer trophic positions that were largely independent of transect baselines. These results were consistent at the community level and when three trophically distinct ant subfamilies and eight abundant ant species were considered separately. Our results suggest that assuming baselines do not vary can produce misleading estimates of consumer trophic positions. We therefore emphasise the importance of clearly defining and applying baseline corrections at a scale that accounts for spatial variation in plant δ¹⁵N values.     

Bacterial diversity and distribution in the southeast edge of the Tengger Desert and their correlation with soil enzyme activities

The nature of microbial communities and their relation to enzyme activities in desert soils is a neglected area of investigation. To address this, the bacterial diversity and distribution and soil physico-chemical factors were investigated in the soil crust, the soil beneath the crust and rhizosphere soil at the southeast edge of the Tengger Desert, using the denaturing gradient gel electrophoresis of 16S rRNA genes amplified by the polymerase chain reaction. Phylogenetic analysis of the sequenced DGGE bands revealed a great diversity of bacteria. The Proteobacteria, consisting of the α, β, and γ subdivisions, were clearly the dominant group at all depths and in rhizosphere soil. Analysis of the enzyme activities indicated that the rhizosphere soil of Caragana korshinskii exhibited the highest protease and polyphenol oxidase activities, and in the soil crust there were increased activities of catalase, urease, dehydrogenase and sucrase. The bacterial community abundance closely correlated with soil enzyme activities in different soils. The presence of Cyanobacteria correlated with significant increases in protease, catalase and sucrase in the soil crust, and increased urease in the rhizosphere soil of Artemisia ordosica. The occurrence of Acidobacteria was associated with significant increases in urease, dehydrogenase, and sucrase in the rhizosphere soil of C. korshinski. The presence of γ-Proteobacteria correlated with a significant increase in polyphenol oxidase in the rhizosphere soil of A. ordosica. The study indicated a close relationship between the soil bacterial community and soil enzymes, suggesting the necessity of further investigations into bacterial function in this desert ecosystem.     

Cooling rate limitations in the diffusion bonding of microchannel arrays

A significant barrier to the diffusion bonding of microchannel arrays is the large capital investment required to setup production. This large capital investment extends from long heating and cooling cycles leading to poor production capacities. Empirical studies in industry have shown that cooling rate is limited by the warpage of microchannel laminae, which is believed to be caused by thermal buckling. In this paper, the limits of cooling rates based on thermal buckling during the diffusion bonding of microchannel laminae are investigated. Finite element analyses of the transient thermal and stress behaviors of these microchannel laminae were conducted to identify the maximum cooling rates for different lamina thicknesses. Findings confirm that cooling rates are limited by the thermal buckling of unconstrained microchannel laminae during cooling of the device. Finite element analysis results are used to extrapolate implications for microchannel production.     

Biomass:polystyrene co-pyrolysis coupled with metal-modified zeolite catalysis for liquid fuel and chemical production

Journal of Material Cycles and Waste Management - Biomass and waste polystyrene plastic (ratio 1:1) were co-pyrolysed followed by catalysis in a two-stage fixed bed reactor system to produce...     

Harnessing place attachment for local climate mitigation? Hypothesising connections between broadening representations of place and readiness for change

Public engagement in local environmental planning and decision-making is often advocated on various grounds, both instrumental and normative. Yet in developed countries in the context of renewable energy infrastructure deployment, place attachment, place identity and place-protective action continue to be implicated in public objection. We set out an interdisciplinary change readiness hypothesis of specifically how local participatory scenario or visioning processes that include climate mitigation measures may support the mobilisation of place attachment for climate mitigation, including renewable energy deployment. We hypothesise that local visioning may support movement towards change readiness by helping to anchor unfamiliar social representations of low carbon energy infrastructure and new patterns of urban form in existing, more positive representations of localities and associated attachments. To this end, seeking ways to modify threat perceptions relating to climate change and renewable energy infrastructure is advocated as a key direction for study.