Interactions between wave action and grazing control the distribution of intertidal macroalgae

Canopy-forming macroalgae are key species on temperate rocky shores. However, there is a lack of understanding of how the relative balance of physical and biological factors controls the establishment and persistence of intertidal macroalgae. Here we present an integrated study of the relative importance of wave-induced forces and grazing for the recruitment and survival of the canopy-forming intertidal macroalgae Fucus vesiculosus and F. spiralis. A set of overtopped breakwaters provided a nearly unconfounded gradient in wave exposure between seaward and landward sides. A biomechanical analysis was performed based on empirical measurements of maximum drag forces in breaking waves, a model of long-term maximum wave height, and the breaking stress of Fucus spp. The estimated maximum flow speed (7-8 m/s) on the seaward side of the breakwaters was predicted to completely dislodge or prune Fucus spp. larger than approximately 10 cm, while dislodgment was highly unlikely on the landward side for all sizes. Experimental transplantation of Fucus spp. supported the biomechanical analysis but also suggested that mechanical abrasion may further limit survival in wave-exposed locations. Experimental removal of the limpet Patella vulgata, which was the principal grazer at this site, resulted in recruitment of Fucus spp. on the seaward side. We present a model of limpet grazing that indicates that limpet densities >5-20 individuals/m2 provide a proximate mechanism preventing establishment of Fucus spp., whereas wave action >2 m/s reduces persistence through dislodgment and battering. In a conceptual model we further propose that recruitment and survival of juvenile Fucus spp. are controlled indirectly by wave exposure through higher limpet densities at exposed locations. This model predicts that climate change, and in particular an increased frequency of storm events in the northeast Atlantic, will restrict fucoids to more sheltered locations.     

A review on thermal analyses of cyclodextrins and cyclodextrin complexes

Environmental Chemistry Letters - Cyclodextrins are valuable natural or synthetically modified cyclic oligosaccharides that are widely used for ameliorating properties of biologically active...     

Effects of physical exercise on musculoskeletal disorders,stress and quality of life in workers

Background. The effect of physical exercise in the workplace (PEW) on health promotion of workers is contradictory. Objective. To evaluate the effects of the PEW in musculoskeletal disorders (MSDs), perception of stress and quality of life in workers. Methods. The participants were divided into two groups: control group (n?=?46) including non-participant workers of the PEW program, and PEW group (n?=?50) including workers who regularly participate in the exercise program. All workers answered the Nordic general questionnaire, the perceived stress scale and the quality-of-life questionnaire. Results. The PEW group reported a lower prevalence of MSDs for the trunk in the last 7 days and 12 months (p?=?0.021 and p?=?0.001, respectively), and for the upper limbs in the last 12 months (p?=?0.001) compared with the control group. The results for the perception of stress and quality of life showed no significant differences between the groups. Conclusion. PEW is a potential method to reduce MSDs in workers, but it was not efficient in reducing stress levels or improving the quality of life of the workers.     

Baked Foams Based on Cassava Starch Coated with Polyvinyl Alcohol with a Higher Degree of Hydrolysis

The aims of this work were to produce trays based on cassava starch, coated with polyvinyl alcohol (PVA) with a higher degree of hydrolysis (98%), and to study the effects of the coating on the mechanical and water sorption properties of the trays. Two types of PVA were tested: SELVOL? 325 (degree of polymerization?=?1000–1500) and SELVOL? 107 (degree of polymerization?=?350–650). A decrease in the water absorption capacity of 50% was observed when the coated samples were compared with the control sample after 30 min of immersion in water. It was observed in both coated samples a reduction of the initial rate of water adsorption sorption and a decrease in hydrophilicity compared with the control sample. Tensile strength and elongation were increased with application of the coatings. The use of the two types of PVA resulted in materials with similar mechanical and water sorption properties.     

Enhanced photocatalytic activity using GO/TiO<Subscript>2</Subscript> catalyst for the removal of DCA solutions

This work aimed to optimize high-performance photocatalysts based on graphene oxide/titanium dioxide (GO/TiO₂) nanocomposites for the effective degradation of aqueous pollutants. The catalytic activity was tested against the degradation of dichloroacetic acid (DCA), a by-product of disinfection processes that is present in many industrial wastewaters and effluents. GO/TiO₂ photocatalysts were prepared using three different methods, hydrothermal, solvothermal, and mechanical, and varying the GO/TiO₂ ratio in the range of 1 to 10%. Several techniques were applied to characterize the catalysts, and better coupling of GO and TiO₂ was observed in the thermally synthesized composites. Although the results obtained for DCA degradation showed a coupled influence of the composite preparation method and its composition, promising results were obtained with the photocatalysts compared to the limited activity of conventional TiO₂. In the best case, corresponding to the composite synthesized via hydrothermal method with 5% of GO/TiO₂ weight ratio, an enhancement of 2.5 times of the photocatalytic degradation yield of DCA was obtained compared to bare TiO₂, thus opening more efficient ways to promote the application of photocatalytic remediation technologies.     

The assessment of water quality in the Lower Luján River (Buenos Aires,Argentina): phytoplankton and algal bioassays

The monitoring of river phytoplankton and several hydrological, physical and chemical variables, in combination with bioassays using Selenastrum capricornutum Printz, allowed the characterisation of three distinct reaches of the Lower River Luján. The upstream stretch, characterised by the lowest depth and discharge, registered the highest nutrient, dissolved heavy metal and chlorophyll a concentrations in accordance with low phytoplankton diversity and the occurrence of several species typical of organically polluted lowland rivers. A downstream improvement, concomitant to increasing river discharge, is revealed by a progressive decrease of organic pollution parameters even though algal toxicity is registered through bioassays. The water input from the Parana River through the G. Arias Channel plays an important role in the regulation of the limnology of the Lower Luján River. As a result of marked increasing discharge, depth and width, there is a decrease in nutrient concentration and phytoplankton density and an increase in dissolved oxygen concentration. Likewise, algal growth rates in the bioassays showed less toxic effect.     

Comparative study of the suitability of three lichen species to trace-element air monitoring

To investigate the suitability of three lichen species (Cetraria islandica, Evernia prunastri, and Ramalina farinacea) as transplants to trace-element air biomonitoring, they were exposed on substratum-free supports, from July 1996 until July 1997, in three European countries with different climates (Germany, Italy, Romania), at six sites with different types of air pollutants (two in each country). After 2, 4, 6, and 12 months of exposure, some portions of thallus were collected, prepared, and measured by instrumental neutron activation analysis (INAA) at the Institute of Physics and Nuclear Engineering in Bucharest and by energy dispersive X-ray fluorescence analysis (EDXRFA) at the University of Hohenheim in Stuttgart. Fifteen environmentally relevant elements: As, Br, Ca, Co, Cr, Cu, Fe, K, Mn, Ni, Pb, S, Sb, V, and Zn were determined. The analytical results were compared statistically. To study the distribution of the trace-elements between the lichens and the lichen throughfall water inside a virtual column, the throughfall water was collected under the lichen transplants during 6 and 12 months. The dried residues were analysed by INAA at Bucharest. The accumulating capacity for all investigated species is evident. For a comparative evaluation, the initial element contents, the "accumulation factors" relative to the bulk deposition, the interspecies "calibration factors", and the "retention efficiencies", defined as ratios of the lichen enrichment to the sum of this enrichment and the content in the lichen throughfall water, were considered. These criteria attest the best suitability for Evernia prunastri, followed by Ramalina farinacea and Cetraria islandica.     

Phytoremediation of polyaromatic hydrocarbons, anilines and phenols

Phytoremediation technologies based on the combined action of plants and the microbial communities that they support within the rhizosphere hold promise in the remediation of land and waterways contaminated with hydrocarbons but they have not yet been adopted in large-scale remediation strategies. In this review plant and microbial degradative capacities, viewed as a continuum, have been dissected in order to identify where bottle-necks and limitations exist. Phenols, anilines and polyaromatic hydrocarbons (PAHs) were selected as the target classes of molecule for consideration, in part because of their common patterns of distribution, but also because of the urgent need to develop techniques to overcome their toxicity to human health. Depending on the chemical and physical properties of the pollutant, the emerging picture suggests that plants will draw pollutants including PAHs into the plant rhizosphere to varying extents via the transpiration stream. Mycorrhizosphere-bacteria and -fungi may play a crucial role in establishing plants in degraded ecosystems. Within the rhizosphere, microbial degradative activities prevail in order to extract energy and carbon skeletons from the pollutants for microbial cell growth. There has been little systematic analysis of the changing dynamics of pollutant degradation within the rhizosphere; however, the importance of plants in supplying oxygen and nutrients to the rhizosphere via fine roots, and of the beneficial effect of microorganisms on plant root growth is stressed. In addition to their role in supporting rhizospheric degradative activities, plants may possess a limited capacity to transport some of the more mobile pollutants into roots and shoots via fine roots. In those situations where uptake does occur (i.e. only limited microbial activity in the rhizosphere) there is good evidence that the pollutant may be metabolised. However, plant uptake is frequently associated with the inhibition of plant growth and an increasing tendency to oxidant stress. Pollutant tolerance seems to correlate with the ability to deposit large quantities of pollutant metabolites in the 'bound' residue fraction of plant cell walls compared to the vacuole. In this regard, particular attention is paid to the activities of peroxidases, laccases, cytochromes P450, glucosyltransferases and ABC transporters. However, despite the seemingly large diversity of these proteins, direct proof of their participation in the metabolism of industrial aromatic pollutants is surprisingly scarce and little is known about their control in the overall metabolic scheme. Little is known about the bioavailability of bound metabolites; however, there may be a need to prevent their movement into wildlife food chains. In this regard, the application to harvested plants of composting techniques based on the degradative capacity of white-rot fungi merits attention.