Postmetamorphic Xenopus laevis shows decreased plasma triiodothyronine concentrations and phosphorylase activity due to subacute phytosterol exposure

Postmetamorphic South African clawed frogs (Xenopus laevis) were exposed to a phytosterol mixture (ca. 80% β-sitosterol and less sitostanol, campesterol, and campestanol) for 14 days at 30 μg l⁻¹ in a flow-through system. The effects of phytosterols (PS) on the plasma thyroid hormone (T₃ and T₄), testosterone, leptin-immunoreactive peptide and tissue glycogen concentrations were determined. The following enzyme activities were also analyzed from the liver and muscle: glycogen phosphorylase and lipase, and from the liver only: glucose-6-phosphatase. The plasma T₃ concentration was lower in the PS-exposed female frogs. Both muscle lipase and glycogen phosphorylase activities were also lower in the PS-exposed animals. These results could indicate that the basal metabolic rate and locomotion activity of the frogs were decreased. The effects could not be attributed to the possible estrogenicity of the PS mixture. Further studies will be needed to evaluate the possible significance of these effects.     

Labile organic carbon regulates phosphorus release from eroded soil transported into anaerobic coastal systems

Coastal eutrophication is expected to increase due to expanding and intensifying agriculture which causes a large amount of soil-associated P to be transported into aquatic systems. We performed anaerobic long-term incubations on field soil to mimic the conditions that eroded soil encounters in brackish sediments. The release of P from soil increased with the amount of labile organic C (acetate) addition and decreased with the soil/solution ratio. We deduce that in less-productive brackish systems, microbial Fe reduction allows for the maintenance of the coupled cycling of Fe and P and restricts the amount of P entering the oxic water. In more eutrophic systems, the formation of Fe sulfides as a result of SO₄ reduction inactivates Fe, and leads to a higher release of P, thus generating an adverse feedback effect. The dependence of the fate of soil-bound Fe and P on the trophic status of the receiving water should be recognized in eutrophication management.     

Biological control of wood decay against fungal infection

Wood (timber) is an important raw material for various purposes, and having biological composition it is susceptible to deterioration by various agents. The history of wood protection by impregnation with synthetic chemicals is almost two hundred years old. However, the ever-increasing public concern and the new environmental regulations on the use of chemicals have created the need for the development and the use of alternative methods for wood protection. Biological wood protection by antagonistic microbes alone or in combination with (bio)chemicals, is one of the most promising ways for the environmentally sound wood protection. The most effective biocontrol antagonists belong to genera Trichoderma, Gliocladium, Bacillus, Pseudomonas and Streptomyces. They compete for an ecological niche by consuming available nutrients as well as by secreting a spectrum of biochemicals effective against various fungal pathogens. The biochemicals include cell wall-degrading enzymes, siderophores, chelating iron and a wide variety of volatile and non-volatile antibiotics. In this review, the nature and the function of the antagonistic microbes in wood protection are discussed.     

Conceptualizing and incorporating social sustainability in the business world

One of the most important challenges faced by business managers today is the integration of sustainability into their core functions. The contemporary enterprise is forced to leap forward from the mere adoption of green practices toward rethinking, redesigning, and redeveloping business practices in a more sustainable way. Most of the initiatives in this attempt have so far emphasized primarily the economic and environmental aspects of sustainable development and overlooked the social dimension of sustainability. As more organizations commit to sustainability, there is an increasing concern to incorporate social sustainability throughout their business operations. To conceptualize and integrate the notion, some organizations use preexisting indicators to demonstrate the value and impact of sustainability, while others look beyond the measurement of impacts by constructing their own system of indicators. This paper draws on a comprehensive literature review to determine a broadly acceptable framework of social sustainability indicators to be conceptualized and integrated into the business world. Findings suggest that economic and environmental sustainability can be driven together with core social factors including fairness and equality, poverty, health, education, delinquencies, demography, culture, and employee engagement within an organization. These results offer insight into the emerging phenomenon of formulating sustainable business strategies for organizations based on social indicators to attain the ultimate sustainable outcomes. This study is among the first to identify social sustainability indicators from societal and corporate perspectives. It offers a comprehensive social sustainability framework that may be adopted by organizations in the business world.     

Phosphorus loss from different farming systems estimated from soil surface phosphorus balance

The phosphorus load originating from crop production and animal husbandry is a major contributor to the eutrophication of lakes, rivers and coastal waters. The P losses to surface waters may, however, differ drastically due to the diversity of agricultural production systems practised under contrasting environmental conditions. To assess the most problematic types of agriculture, we need information on the P load from different alternative farming practices. Such information cannot, however, be obtained solely from field runoff experiments, as the number of treatment combinations required to account for all relevant farming systems and environmental conditions far exceeds our research capabilities. To facilitate the comparison of P loads, we therefore need reasonably simple models. A key factor controlling the P load from agriculture is the past and present use of nutrients in fertilizers and manure in relation to a crop's uptake, i.e. the soil-surface balance of P. Here, we present a simple empirical model that relates the P surplus (or deficit) in a farm to the edge-of-field losses of algal-available P. Based on long-term fertilizer trials, the model first estimates the change in soil-test P of top soil with the aid of the soil-surface balance of P. Soil-test P is then used to approximate the concentration of dissolved reactive P in surface runoff and drainage flow, as adjusted for different P application types. The loss of particulate P is obtained from typical erosion rates. The model can be applied in life-cycle analyses and in assessing future developments. We illustrate use of the model by calculating the loss of algal-available P from conventional and organic crop and dairy farms located on clay and fine sand soils.     

Total and methyl mercury concentrations and fluxes from small boreal forest catchments in Finland

Total mercury (TotHg) and methyl mercury (MeHg) concentrations were studied in runoff from eight small (0.02-1.3 km2) boreal forest catchments (mineral soil and peatland) during 1990-1995. Runoff waters were extremely humic (TOC 7-70 mg l-1). TotHg concentrations varied between 0.84 and 24 ng l-1 and MeHg between 0.03 and 3.8 ng l-1. TotHg fluxes from catchments ranged from 0.92 to 1.8 g km-2 a-1, and MeHg fluxes from 0.03 to 0.33 g km-2 a-1. TotHg concentrations and output fluxes measured in runoff water from small forest catchments in Finland were comparable with those measured in other boreal regions. By contrast, MeHg concentrations were generally higher. Estimates for MeHg output fluxes in this study were comparable at sites with forests and wetlands in Sweden and North America, but clearly higher than those measured at upland or agricultural sites in other studies. Peatland catchments released more MeHg than pure mineral soil or mineral soil catchments with minor area of peatland.     

Roadside aerosol study using hygroscopic,organic and volatility TDMAs: Characterization and mixing state

Traffic-related aerosol particles are ubiquitous in the urban atmosphere. As they are produced at ground level, they can also cause adverse health effects to urban dwellers. However, knowledge of the formation, transformation and chemically resolved size distribution of urban ultrafine particles is incomplete. Thus, more of these measurements are needed for better assessment of ambient air quality and its potential health effects. The particle number concentration, aerosol black carbon (BC) concentration and size distribution of traffic-related aerosols were measured near two major roads in Kuopio, Finland, from 16 June to 5 July, 2004. Furthermore, the properties of roadside aerosol particles were examined with the Tandem Differential Mobility Analyzer technique (TDMA). A suite of TDMA instruments relying on water (hygroscopic TDMA) and ethanol (organic TDMA) condensation as well as heating (volatility TDMA) were deployed to study the composition of the nucleation and Aitken mode particles (D_p = 10–50 nm) formed from vehicle exhaust. The results show that a simple three-component model was able to reproduce characteristic insoluble, organic and water-soluble volume fractions. Insoluble constituents were dominant in the Aitken mode particles, whereas organic compounds dominated the nucleation mode sizes. On average, only a small volume fraction was water-soluble, but a clear external mixing was observed particularly when enough time was allowed after the tail pipe emissions. The contribution of the insoluble material was seen to increase as a function of particle size, being typically less than 10% at 10 nm and between 20 and 50% at 50 nm, in contrast to the organic fraction, which decreased from about 80% at nucleation mode size range to 50–60% at 50 nm.     

Preferred Handrail Height for Spiral Stairs—A Fitting Trial Study

Stairways are, in general, a thoroughly studied subject, but there is almost no scientific data available about spiral stairs. They are, however, widely used in homes, industrial sites and public buildings. The purpose of this study was to determine preferred handrail heights for a spiral stairway. The most preferred handrail height for descent was 105 cm. On the other hand, 95% of the participants regarded handrail heights between 95 and 100 cm satisfactory for descending. Participants’ anthropometric data was combined with the handrail height preference to develop a draft of a model to predict preferred handrail height for other user populations.     

Mobility and Methylation of Mercury in Forest Soils Development of an In-Situ Stable Isotope Tracer Technique and Initial Results

A method for investigating in-situmethylation and mobility of mercury has beendeveloped and applied to forest soil. The methodis based on additions of stable ¹⁹⁹Hgisotopes to forest soil plots followed bysampling and analysis of isotope ratios of totalmercury and MeHg using ICP-MS. Initial resultsindicate that a fraction (30%) of the mercuryadded to the forest soils is immobilised over atime scale of 16 months. A small but significantfraction of the mercury is methylated during thesame time scale. Higher methylation rates werefound in wetland soil than in dry forest podzolsoil.